Doublet craters on Venus

Of the impact craters on Earth larger than 20 km in diameter, 10-15% (3 out of 28) are doublets, having been formed by the simultaneous impact of two well-separated projectiles. The most likely scenario for their formation is the impact of well-separated binary asteroids. If a population of binary asteroids is capable of striking the Earth, it should also be able to hit the other terrestrial planets as well. Venus is a promising planet to search for doublet craters because its surface is young, erosion is nearly nonexistent, and its crater population is significantly larger than the Earth's. After a detailed investigation of single craters separated by less than 150 km and “multiple” craters having diameters greater than 10 km, we found that the proportion of doublet craters on Venus is at most 2.2%, significantly smaller than Earth's, although several nearly incontrovertible doublets were recognized. We believe this apparent deficit relative to the Earth's doublet population is a consequence of atmospheric screening of small projectiles on Venus rather than a real difference in the population of impacting bodies. We also examined “splotches,” circular radar reflectance features in the Magellan data. Projectiles that are too small to form craters probably formed these features. After a careful study of these patterns, we believe that the proportion of doublet splotches on Venus (14%) is comparable to the proportion of doublet craters found on Earth (10-15%). Thus, given the uncertainties of interpretation and the statistics of small numbers, it appears that the doublet crater population on Venus is consistent with that of the Earth.     

Optimization of grid-drilling using computer simulation

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.     

Error estimates with L1 solutions

A method is given, based on the pseudoinverse of the equations of condition, to obtain error estimates for the solution in the normL ₁ of an over-determined linear system. The computational labor to obtain the errors, while not trivial, is less than that for various competing methods, particularly if there are many more equations of condition than unknowns. The error estimates for anL ₁ solution are substantially larger than those for a least squares solution of the some data. It is suggested that a complete discussion of a linear system include at least bothL ₁ and least squares solutions with their respective errors and the condition number of the linear system.     

Longevity of fluorine-bearing tremolite on Venus

There is a general belief that hydrous minerals cannot exist on Venus under current surface conditions. This view was challenged when Johnson and Fegley (2000, Icarus 146, 301-306) showed that tremolite (Ca₂Mg₅Si₈O₂₂(OH)₂), a hydrous mineral, is stable against thermal decomposition at current Venus surface temperatures, e.g., 50% decomposition in 4 Ga at 740 K. To further explore hydrous mineral thermal stability on Venus, we experimentally determined the thermal decomposition kinetics of fluorine-bearing tremolite. Fluor-tremolite is thermodynamically more stable than OH-tremolite and should decompose more slowly. However how much slower was unknown. We measured the decomposition rate of fluorine-bearing tremolite and show that its decomposition is several times to greater than ten times slower than that of OH-tremolite. We also show that F-bearing tremolite is depleted in fluorine after decomposition and that fluorine is lost as a volatile species such as HF gas. If tremolite ever formed on Venus, it would probably also contain fluorine. The exceptional stability of F-bearing tremolite strengthens our conclusions that if hydrous minerals ever formed on Venus, they could still be there today.     

Dynamics of Two Planets in the 3/2 Mean-motion Resonance: Application to the Planetary System of the Pulsar PSR B1257+12

This paper considers the dynamics of two planets, as the planets B and C of the pulsar PSR B1257+12, near a 3/2 mean-motion resonance. A two-degrees-of-freedom model, in the framework of the general three-body planar problem, is used and the solutions are analyzed through surfaces of section and Fourier techniques in the full phase space of the system.On the possibility of existence of a fourth planet in distant orbit, see Wolszczan et al., 2000     

An estimate of the contribution of high nergy cosmic-ray protons to the absorbed dose inventory of a cometary nucleus

We discuss the contribution of cosmic-ray protons at all energies above 1 MeV to the absorbed doses of the surface layers of a comet. Since there exists no calculation which takes into account proton energy losses by means of losses to electrons and nuclear collisions (in a cascade process), and losses due to the low energy end-products of the cascade, we have made a rough estimate of all of these contributions. An analytical formula is proposed that allows a rapid estimate of ranges and the dose absorbed at any depth. We give dose-depth curves for two extreme values of the energy at which nuclear collisions begin to dominate the slowing-down process, and for an intermediate value we display the dose-depth curve down to 20 m from the surface. The relevance of these findings to dosimetry in comets and some alterations of cometary material are considered. The need for improving the analytical expression proposed is stressed.     

Coronal mass ejection associated with the stationary post-flare arch of 21–22 May 1980

By using a combination of X-ray (HXIS), H (Haleakala), white-light corona (Solwind), and zodiacal light (Helios) images on 21–22 May, 1980 we demonstrate, and try to explain, the co-existence of a coronal mass ejection with a stationary post-flare coronal arch. The mass ejection was seen, both by Solwind and Helios, in prolongation of the path of a powerful spray, whereas the active region filament did not erupt. A tentative comparison is made with other occurrences of stationary, or quasi-stationary post-flare coronal arches.     

Response of earth and venus ionospheres to corotating solar wind stream of 3 July 1979

Corotating solar wind streams emanating from stable coronal structures provide an unique opportunity to compare the response of planetary ionospheres to the energy conveyed in the streams. For recurrent solar conditions the signal propagating outward along spiral paths in interplanetary space can at times exhibit rather similar content at quite different downstream locations in the ecliptic plane. Using solar wind measurements from plasma detectors on ISEE-3, Pioneer Venus Orbiter (PVO) and Helios-A, as well as in-situ ion composition measurements from Bennett Ion Mass Spectrometers on the Atmosphere Explorer-E and PVO spacecraft, corotating stream interactions are examined at Earth and Venus. During May–July 1979 a sequence of distinct, recurrent coronal regions developed at the Sun. Analysis of these regions and the associated solar wind characteristics indicates a corrresponding sequence of corotating streams, identifiable over wide distances. The time series of solar wind velocity variations observed at Earth, Venus, and the Helios-A positions during June–July attests to intervals of corotating stream propagation. The characteristics of the stream which passed Earth on July 3, are observed at Helios-A and at Venus (PVO) about 8 days later, consistent with the spiral path propagation delay times between the locations in the ecliptic plane. On July 3, Earth and Venus have a wide azimuthal separation of about 142 . Although the planetary environments are distinctly different, pronounced and somewhat analagous ionospheric responses to the stream passage are observed at both Earth and Venus. The response to the intercepted stream is consistent with independent investigations which have shown that the variability of the solar wind momentum flux is an important factor in the solar wind-ionosphere interaction at both planets.     

Late Quaternary Bison diminution on the Great Plains of North America: evaluating the role of human hunting versus climate change

Body size changes of Bison and mortality age structure data document the effects of climate-driven environmental change and human hunting pressure on large mammals in North America. Morphometric and mortality data are drawn from 58 archaeological and 9 paleontological localities dating between 37,000 and 250 calBP. Proxy information on body size is based on measurements recorded on 901 adult calcanei (os calcis) and 1026 humeri. In addition, published mortality profiles from 24 archaeological faunal assemblages spanning the last 14,000 years were used to approximate the age structure of bison populations. These results suggest that dramatic diminution in bison body size occurred in several short bursts, rather than a continuous gradual decline. These periods of rapid size reduction correlate with times of ecological reorganization, when aridity-driven changes in grasslands decreased forage quality and availability. Mortality age data indicate that the decrease in body size occurred in a context where there was no evidence for a progressively severe juvenile bias in bison populations. Overall, it appears that the changes in body size were a reaction to environmental conditions rather than the result of human predation pressure.