Comet nuclei: Morphology and implied processes of surface modification

Surface morphology and related issues for nuclei of three comets: Halley, Borrelly and Wild 2, are considered in the paper. Joint consideration of publications and results of our analysis of the comets’ images led to conclusions, partly new, partly repeating conclusions published by other researchers. It was found that typical for all three nuclei is the presence of rather flat areas: floors of craters and other depressions, mesas and terraces. This implies that flattening surfaces or planation is a process typical for the comet nuclei. Planation seems to work through the sublimation-driven slope collapse and retreat. This requires effective sublimation so this process should work only when a comet is close to the Sun and if on the nucleus there are starting slopes, steep and high enough to support the “long-distance” avalanching of the collapsing material. If the surface had no starting slopes, then instead of planation, the formation of pitted-and-hilly surfaces should occur. An example of this could be the mottled terrain of the Borelly nucleus. Both ways of the sublimational evolution on the nucleus surface should lead to accumulation of cometary regolith. The thickness of the degassed regolith is not known, but it is obvious that in surface depressions, including the flat-floor ones, it should be larger compared with nondepression areas. This may have implications for the in situ study of comets by the Deep Impact and Rosetta missions.Our morphological analysis puts constraints on the applicability of the popular “rubble-pile comet nucleus” hypothesis (Weissman, 1986. Are cometery nuclei primordial rubble piles? Nature 320, 242-244.). We believe that the rubble pile hypothesis can be applicable to the blocky Halley nucleus. The Borelly and Wild 2 nuclei also could be rubble piles. But in these cases the “rubbles” have to be either smaller than 30-50 m (a requirement to keep lineament geometry close to ideal), or larger than 1-2 km (a requirement to form the rather extended smooth, flat surfaces of mesa tops and crater floors). Another option is that the Borelly and Wild 2 nuclei are not rubble piles.In relation to surface morphology we suggest that three end-member types of the comet nuclei may exist: (1) impact cratered “pristine” bodies, (2) non-cratered fragments of catastrophic disruption, and (3) highly Sun-ablated bodies. In this threefold classification, the Wild 2 nucleus is partially ablated primarily cratered body. Borrelly is significantly ablated and could be either primarily cratered or not-cratered fragment. Halley is certainly partially ablated but with the available images it is difficult to say if remnants of impact craters do exist on it.Recently published observations and early results of analysis of the Tempel 1 nucleus images taken by Deep Impact mission are in agreement with our conclusions on the processes responsible for the Halley, Borrelly and Wild 2 nuclei morphologies. In particular, we have now more grounds to suggest that decrease in crater numbers and increase of the role of smooth flat surfaces in the sequence Wild 2?Tempel 1?Borelli reflects a progress in the sublimational degradation of the nucleus surface during comet passages close to the Sun.     

Tepev Mons on Venus: Morphology and elastic bending models

Tepev Mons is a large volcanic structure of about 250 km in diameter with an elevation of 5 km above the surroundings, located at the southwestern edge of Bell Regio. It is surrounded by a moat with a depth of about 0.5 km. If this moat is considered to be caused by bending of the lithosphere due to the load of the volcano, then elastic bending models give limits for the effective flexural rigidity FR and the effective elastic thickness of the lithosphere L: 2 x 10²³ Nm FR 3 x 10²⁴ Nm and 30 km L 100 km. High flexural rigidities are associated with small depressions and large thicknesses of the lithosphere and vice versa.Contribution No 345, Institut für Geophysik der Universität Kiel, F.R.G.     

On the rate of ancient meteoroidal flux: Studies of the pre-mare crater population on the Moon

According to radiometric dating of lunar rocks, meteoroidal bombardment and accompanying cratering on the Moon were intensive in the first 0.7×10⁹ y, the so-calledterra stage. Recently the hypothesis of a terminal cataclysm has been gaining acceptance, meaning that a sharp increase in the bombardment followed by a steep decay occurred at the end of theterra stage.The purpose of this paper is to investigate possible variations in the intensity of the bombardment during theterra stage by analyzing the population of large (3–1000 km)terra craters and comparing it with results obtained by theoretical models. The proportion of fresh craters is specifically used.Observational data were obtained by studying the craters on an oldterra surface photographed by Zond 8 and/or covered by LTO and LM maps and by conducting a statistical study of theterra listed in the Lunar and Planetary Laboratory Catalog. Mathematical models were developed in such a way as to make them dimensionless, and as such applicable even without the knowledge of the physical constants and variables involved. Particularly powerful is the method of measuring time as multiples of the average lifetime of a crater of that size.The following conclusions and/or interpretations are reached. (1) A crater remains fresh for less than 20% of the average life of a crater of that size. (2) A condition of equilibrium (i.e., on the average, a new impact does not cause a net increase in the total number of craters) is reached or almost reached on lunarterrae. (3) The age of theterra surface is more than three average lifetimes of the 2 km to at least 20 km size craters (4) The observedterra crater population isnot the result of two cataclysms, one at the beginning of the stage and one at the end. (5) This population, however, could be the result of a constant or slowly decaying flux continuing until the end of the stage, when the terminal cataclysms occurred. This sequence of events cannot be proven or disproven. (6) If no terminal cataclysm occurred, then the meteoroidal flux during theterra stage was slowly decaying or constant. (7) The formation of all the large multi-ringed basins essentially contemporaneously is doubtful.     

Morphologic and gravimetric investigations of Bell and Eisila Regiones on Venus

Bell Regio is a highland fragment south of Ishtar Terra, extending 1300 km in N-S direction and 900 km in E-W direction. South of this region Eisila Regio is located with an E-W extension of 8000 km and a width of 2000 km. Bell Regio consists of two large massifs: a northern massif with maximum altitudes of 2.5 to 3.0 km above the 6051 km datum and with a semi-corona (other coronae on Venus are associated with volcanic-tectonic processes) and a southern massif with a maximum of 4 to 4.5 km above the datum. The possible shield volcano Tepev Mons of 250 km in diameter is superimposed on the southern massif. It shows a radar dark crater of 40 km diameter on its eastern flank, a crater-like feature of 15 km diameter on the top and a radar bright area extending from the dark crater across the summit. South of Tepev Mons are several volcanic structures with summit depressions. The crest of Bell Regio exhibits a N-S extending fossa system. The whole fresh appearing plain-like area has been classified as rather young compared to other units. Gravity data show a maximum of 33 mGal at Bell Regio and 35 mGal at eastern Eisila Regio. The basins north and south of the highland fragments are associated with gravity lows.Density models have been calculated along the gravity profile Rev. 163 of Pioneer Venus Orbiter across Bell and Eisila Regiones assuming Airy isostatic compensation of the topography and considering several boundary conditions (e.g. mean crustal thickness T<- 100 km). There are two groups of density models in the case of Airy compensation. In the first group global total compensation is assumed along the profile and regional partial compensation for Bell and Eisila Regiones. This solution gives a range of possible models with 10 km <- T <- 100 km and a partial compensation for Bell and Eisila Regiones between 12% and 55%. Thus these two highland fragments show subsurface surplus masses.The second group of models considers for the whole profile total compensation with a global T <- 100 km and a regional very large depth of compensation for Bell and Eisila Regiones, i.e. T > 100 km.The highland of Beta Regio has, like Bell Regio, a N-S rifting system, volcanic structures, a fresh appearing plain-like surface and either deep-seating compensating masses or near surface surplus masses. Bell can be considered as little sister of Beta. The geological and geophysical results imply a volcanic-tectonic uplift over a hot spot. The conditions of Atla Regio in eastern Aphrodite Terra are similar. Thus the existence of volcanic-tectonic uplifts support the important role of hot spot volcanism on Venus.Contribution Nr. 343, Institut für Geophysik der Universität Kiel, F.R.G.     

Spectral properties of simulated impact glasses produced from martian soil analogue JSC Mars-1

To simulate the formation of impact glasses on Mars, an analogue of martian bright soil (altered volcanic soil JSC Mars-1) was melted at relevant oxygen fugacities using a pulsed laser and a resistance furnace. Reduction of Fe³⁺ to Fe²⁺ and in some cases formation of nanophase Fe⁰ in the glasses were documented by Mössbauer spectroscopy and TEM studies. Reflectance spectra for several size fractions of the JSC Mars-1 sample and the glasses were acquired between 0.3 and 25 μm. The glasses produced from the JSC Mars-1 soil show significant spectral variability depending on the method of production and the cooling rate. In general, they are dark and less red in the visible compared to the original JSC Mars-1 soil. Their spectra do not have absorption bands due to bound water and structural OH, have positive spectral slopes in the near-infrared range, and show two broad bands centered near 1.05 and 1.9 μm, typical of glasses rich in ferrous iron. The latter bands and low albedo partly mimic the spectral properties of martian dark regions, and may easily be confused with mafic materials containing olivine and low-Ca pyroxene. Due to their disordered structures and vesicular textures, the glasses show relatively weak absorption features from the visible to the thermal infrared. These weak absorption bands may be masked by the stronger bands of mafic minerals. Positive near-infrared spectral slopes typical of fresh iron-bearing impact or volcanic glasses may be masked either by oxide/dust coatings or by aerosols in the Mars' atmosphere. As a result, impact glasses may be present on the surface of Mars in significant quantities that have been either misidentified as other phases or masked by phases with stronger infrared features. Spectrometers with sufficient spatial resolution and wavelength coverage may detect impact glasses at certain locations, e.g., in the vicinity of fresh impact craters. Such dark materials are usually interpreted as accumulations of mafic volcanic sand, but the possibility of an impact melt origin of such materials also should be considered. In addition, our data suggest that high contents of feldspars or zeolites are not necessary to produce the transparency feature at 12.1 μm typical of martian dust spectra.     

Analysis of suspicious objects in TV panorama taken by Venera-9 spacecraft

In the paper of L.V. Ksanfomality published in this issue of the journal, some objects observed in the TV panorama sent by Venera-9 are interpreted as possible specimens of the Venus fauna. Our analysis of this panorama, supported by comparisons with various objects observed on the surfaces of Earth and the Moon, shows that all objects seen in the Venera-9 panorama are probably objects of an abiotic nature. These are polygonal fragments of basaltic lavas, platy fragments of lithified deposits of fine-grained fraction of ejecta from distant impact craters and more rare fragments of rounded appearance, probably, volcanic breccias.     

Water and other volatiles on the moon: A review

This paper presents a review of research findings on the various forms of water on the Moon. First, this is the water of the Moon’s interior, which has been detected by sensitive mass spectrometric analysis of basaltic glasses delivered by the Apollo 15 and Apollo 17 missions. The previous concepts that lunar magmas are completely dehydrated have been disproved. Second, this is H₂O and/or OH in a thin layer (a few upper millimeters) of the lunar regolith, which is likely a result of bombardment of the oxygen contained in the lunar regolith with solar wind protons. This form of water is highly unstable and quite easily escapes from the surface, possibly being one of the sources of the water ice reservoirs at the Moon’s poles. Third, this is water ice associated with other frozen gases in cold traps at the lunar poles. Its possible sources are impacts of comets and meteorites, the release of gas from the Moon’s interior, and solar wind protons. The ice trapped at the lunar polars could be of practical interest for further exploration of the Moon.     

Boguslawsky Crater on the Moon: Landing Site Selection for the <Emphasis Type="Italic">Luna–Glob</Emphasis> Mission Descent Module

The article reviews the results of photo geological study of the lunar surface in terms of selection of most favorable landing sites from the point of view of science merit and safety for the Luna—Glob mission descent module.     

Estimation of the age of impact craters and other adjacent geological subdivisions within the Thetis Regio on Venus

Based on the results of photogeological analysis of the Thetis Regio on Venus, 13 material and 3 structural subunits were mapped and the relative sequence of their formation was determined. Two subunits are represented by impact craters, which were subdivided into relatively older (C1, 7 craters) and younger (C2, 8 craters) ones, according to the presence and clarity of the associated radio-dark halo. Taking into account the data from previous studies, it was established that the age of the first group was older than 1/2T or 1/3T, where T is the average age of the surface of Venus, and the age of the second group was younger than these values. Analyzing the age relationships between these craters and other geological subunits, it was determined that the formation of one of the largest rift zones in this area of Venus occurred later than at 1/3T up to the present time.