The Glueckstadt Graben of the North-German Basin: new insights into the structure from 3D and 2D gravity analyses

The structure of the Glueckstadt Graben has been investigated by use of 3D gravity backstripping technique and by 2D gravity and magnetic modelling. Subtracting the gravity effects of the Meso-Cenozoic sediments together with Permian salt reveals a positive residual anomaly within the Glueckstadt Graben. This anomaly includes two local maxima over the Westholstein and Eastholstein Troughs. The 2D gravity models point to the presence of a high-density body within the lower crust of the Glueckstadt Graben. In addition, the results of 2D magnetic modelling indicate that the central part of the high-density body is overlain by an area with high susceptibility. Most probable, the formation of this high-density body is a result of complex poly-phase tectonic history of the study area. Finally, the results of gravity modelling indicate that Permian salt is not homogeneous. 3D gravity analysis and, especially, 2D gravity modelling have distinguished the differences in degree of salt saturation in salt-rich bodies, and elucidate the proportion of Rotliegend salt.     

Lithosphere structure of European sedimentary basins from regional three-dimensional gravity modelling

A three-dimensional (3D) density model, approximated by two regional layers—the sedimentary cover and the crystalline crust (offshore, a sea-water layer was added), has been constructed in 1° averaging for the whole European continent. The crustal model is based on simplified velocity model represented by structure maps for main seismic horizons—the “seismic” basement and the Moho boundary. Laterally varying average density is assumed inside the model layers. Residual gravity anomalies, obtained by subtraction of the crustal gravity effect from the observed field, characterize the density heterogeneities in the upper mantle. Mantle anomalies are shown to correlate with the upper mantle velocity inhomogeneities revealed from seismic tomography data and geothermal data. Considering the type of mantle anomaly, specific features of the evolution and type of isostatic compensation, the sedimentary basins in Europe may be related into some groups: deep sedimentary basins located in the East European Platform and its northern and eastern margins (Peri-Caspian, Dnieper–Donets, Barents Sea Basins, Fore–Ural Trough) with no significant mantle anomalies; basins located on the activated thin crust of Variscan Western Europe and Mediterranean area with negative mantle anomalies of −150 to −200×10⁻⁵ ms⁻² amplitude and the basins associated with suture zones at the western and southern margins of the East European Platform (Polish Trough, South Caspian Basin) characterized by positive mantle anomalies of 50–150×10⁻⁵ ms⁻² magnitude. An analysis of the main features of the lithosphere structure of the basins in Europe and type of the compensation has been carried out.     

Large-scale 3-D Gravity Analysis of the Inhomogeneities in the European-Mediterranean Upper Mantle

—Methods and the results of estimating the anomalies characterising the density inhomo geneities in the European-Mediterranean upper mantle are described. These anomalies were obtained by subtracting the gravity effect of a crustal density model derived from seismic velocities from the observed gravity field averaging over an area of 1°× 1°. The 3-D density model of the study region comprises two regional layers of varying thickness with lateral variation of average density the sedimentary cover and the crystalline crust. The average densities for model layers were evaluated by using a velocity/density conversion function and taking into account sediment consolidation with depth. Clear correlation between residual gravity anomalies and both velocity heterogeneities and thermal regime data of the upper mantle has been revealed. An agreement of positive anomalies over the Alps, the Adriatic plate and the Calabrian Arc with high velocity domains in the upper mantle and reduced temperatures at the subcrustal layer are caused by lithospheric "roots" and thickened lithosphere below these structures. Gravity residual lows, revealed over the Western Mediterranean Basin and Pannonian Basin, are in correspondence with both low velocities and high temperatures in the upper mantle. These anomalies are the result of the presence of asthenosphere in shallow near-Moho depths below these basins.     

The lithosphere structure and geodynamics of the West and East Black Sea Basins

The velocity structure of the Black Sea lithosphere has been studied using the local seismic tomography method based on the Backus-Gilbert approach and applied for a quite large amount of seismological data. As seismic sources, we used the earthquakes that occurred within the Black Sea and adjoining regions and generated seismic waves recorded by seismic stations around the Black Sea. This yielded information on the 3D distribution of P-waves within the most heterogeneous and poorly investigated uppermost layer of the Black Sea region (down to a depth of 60 km). The interpretation of these results, together with new data on the velocity structure of the crust of the Black Sea led to the conclusion about the different lithosphere beneath the West and the East Black Sea Basins. This can be explained by origination of the depressions in the western and eastern parts of the Black Sea at different microplates and by specific features in their development at rifting and post-rifting stages.     

Collision processes at the northern margin of the Black Sea

Extended along the Crimea–Caucasus coast of the Black Sea, the Crimean Seismic Zone (CSZ) is an evidence of active tectonic processes at the junction of the Scythian Plate and Black Sea Microplate. A relocation procedure applied to weak earthquakes (m_b ≤ 3) recorded by ten local stations during 1970–2013 helped to determine more accurately the parameters of hypocenters in the CSZ. The Kerch–Taman, Sudak, Yuzhnoberezhnaya (South Coast), and Sevastopol subzones have also been recognized. Generalization of the focal mechanisms of 31 strong earthquakes during 1927–2013 has demonstrated the predominance of reverse and reverse–normal-faulting deformation regimes. This ongoing tectonic process occurs under the settings of compression and transpression. The earthquake foci with strike-slip component mechanisms concentrate in the west of the CSZ. Comparison of deformation modes in the western and eastern Crimean Mountains according to tectonophysical data has demonstrated that the western part is dominated by strike-slip and normal- faulting, while in the eastern part, reverse-fault and strike-slip deformation regimes prevail. Comparison of the seismicity and gravity field and modes of deformation suggests underthusting of the East Black Sea Microplate with thin suboceanic crust under the Scythian Plate. In the Yuzhnoberezhnaya Subzone, this process is complicated by the East Black Sea Microplate frontal part wedging into the marginal part of the Scythian Plate crust. The indentation mechanism explains the strong gravity anomaly in the Crimean Mountains and their uplift.     

Structure of the lithosphere below the southern margin of the East European Craton (Ukraine and Russia) from gravity and seismic data

The present study was undertaken with the objective of deriving constraints from available geological and geophysical data for understanding the tectonic setting and processes controlling the evolution of the southern margin of the East European Craton (EEC). The study area includes the inverted southernmost part of the intracratonic Dnieper-Donets Basin (DDB)–Donbas Foldbelt (DF), its southeastern prolongation along the margin of the EEC–the sedimentary succession of the Karpinsky Swell (KS), the southwestern part of the Peri-Caspian Basin (PCB), and the Scythian Plate (SP). These structures are adjacent to a zone, along which the crust was reworked and/or accreted to the EEC since the late Palaeozoic. In the Bouguer gravity field, the southern margin of the EEC is marked by an arc of gravity highs, correlating with uplifted Palaeozoic rocks covered by thin Mesozoic and younger sediments. A three-dimensional (3D) gravity analysis has been carried out to investigate further the crustal structure of this area. The sedimentary succession has been modelled as two heterogeneous layers—Mesozoic–Cenozoic and Palaeozoic—in the analysis. The base of the sedimentary succession (top of the crystalline Precambrian basement) lies at a depth up to 22 km in the PCB and DF–KS areas. The residual gravity field, obtained by subtracting the gravitational effect of the sedimentary succession from the observed gravity field, reveals a distinct elongate zone of positive anomalies along the axis of the DF–KS with amplitudes of 100–140 mGal and an anomaly of 180 mGal in the PCB. These anomalies are interpreted to reflect a heterogeneous lithosphere structure below the supracrustal, sedimentary layers: i.e., Moho topography and/or the existence of high-density material in the crystalline crust and uppermost mantle. Previously published data support the existence of a high-density body in the crystalline crust along the DDB axis, including the DF, caused by an intrusion of mafic and ultramafic rocks during Late Palaeozoic rifting. A reinterpretation of existing Deep Seismic Sounding (DSS) data on a profile crossing the central KS suggests that the nature of a high-velocity/density layer in the lower crust (crust–mantle transition zone) is not the same as that of below the DF. Rather than being a prolongation of the DDB–DF intracratonic rift zone, the present analysis suggests that the KS comprises, at least in part, an accretionary zone between the EEC and the SP formed after the Palaeozoic.     

Deep Structure and Geodynamics of the Black Sea–Caspian Region

Geotectonics - New data on the crust structure of the Black Sea?Caspian region, including the Scythian and Anatolian plate margins, the Caucasus, Black Sea and Southern Caspian structures are...     

Rotation curves of luminous spiral galaxies

We have investigated the stellar light distribution and the rotation curves of high‐luminosity spiral galaxies in the local Universe. The sample contains 30 high‐quality extended Hα and H I rotation curves. The stellar disk scale‐length of these objects was measured or taken from the literature. We find that in the outermost parts of the stellar disks of these massive objects, the rotation curves agree with the Universal Rotation Curve (Salucci et al. 2007), however a few rotation curves of the sample show a divergence (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)