Astrometric investigation with the Tautenburg Schmidt telescope

The observations and the plate reduction technique for the determination of positions and absolute proper motions which is used in Potsdam are described. Recent results have shown that an accuracy of about 0 _. 1 for positions and 0 _. ⁷ cent _. ^–1 for proper motions can be achieved both for bright (8^m–12^m) and faint (16^m–18^m) stars. Three astrometric programmes using the Tautenburg plates are presented.     

Petrogenesis of anomalous K-enriched MORB from the Southwest Indian Ridge: 11°53′E to 14°38′E

Glassy pillow basalts with unusual geochemical characteristics for mid-ocean ridge basalt (MORB) have been dredge sampled from the Southwest Indian Ridge between 12 and 15°E during Leg ANT IV/4 of the F.S. POLARSTERN. Lavas from 4 of 6 dredges are moderately nepheline normative, highly K-enriched (0.5–1.77 wt% K₂O) alkali basalts and hawaiites. Mg-numbers indicate that many of the lavas are fairly primitive (Mg No.=63–67), yet show extreme enrichment in incompatible elements; e.g. Nb (24–60 ppm), Ba (170–470 ppm) and Sr (258–460 ppm). Incompatible-element ratios such as Zr/Nb (3–5) and Y/Nb (0.46–1.1) are extremely low even for E-type (enriched) MORB, whereas (La/Yb)_n ratios are particularly high (3.4–7.8). ⁸⁷Sr/⁸⁶Sr (0.70290–0.70368), ¹⁴³Nd/¹⁴⁴Nd (0.51302–0.51284) and ²⁰⁶Pb/²⁰⁴Pb (18.708–19.564) isotopic ratios further indicate the geochemically enriched nature of these lavas, which range from the compositional field for depleted N-type (normal) MORB towards the composition of Bouvet Island lavas. Mutually correlated incompatible-element and Sr-, Nd- and Pb-isotopic ratios allow a fairly well constrained model to be developed for the petrogenesis of these unusually alkalic mid-ocean ridge lavas. The alkalic nature and degree of enrichment in incompatible elements is ascribed to particularly low degrees of partial melting (3–5 wt%), at greater than usual depth, of a source region that has experienced prior geochemical enrichment (by veining) related to the upwelling Bouvet mantle plume. To account for the observed compositional variations, a model is proposed whereby mixing between partial melts derived from these geochemically enriched silicate veins, and an incipient to low percentage (±2%) melt from the surrounding geochemically depleted suboceanic asthenosphere occurs as a consequence of increasing degree of melting with adiabatic upwelling. Eruption of these alkalic lavas in this spreading ridge environment is attributed to a temporary hiatus in tholeiitic volcanism and associated spreading along this section of the Southwest Indian Ridge, related to readjustment of spreading direction to a more stable plate geometry.     

The depth vs. depth plot: An aid to selecting piezometer installation depths in boreholes

Dick, R.C., 1976. The depth vs. depth plot: an aid to selecting piezometer installation depths in boreholes. Eng. geol., 10: 37–42.The location of the piezometric surface within a soil or rock mass is often the critical factor in stability analysis and in evaluations of reservoir watertightness. Sealed piezometers are now almost universally used to measure water pressure within the mass. The location of these piezometers must be decided immediately upon completion of each borehole. A common aid to making this decision is a plot of borehole depth and borehole water level as functions of time. This paper introduces the reader to another way to evaluate the same data, with the borehole water depth plotted as a function of borehole depth. Anomalies can be detected more easily, and piezometers installed within these zones. Examples are given.     

First record of a Cretaceous cheilostome bryozoan from Hokkaido, Japan

A small collection of recrystallised, encrusting colonies of a single species from the Mikasa Formation (lower Middle Cenomanian), represents the first record of cheilostome (malacostegan or anascan) bryozoans from Hokkaido, Japan.     

Wind erosion from military training lands in the Mojave Desert, California, U.S.A.

Military training activities reduce vegetation cover, disturb crusts, and degrade soil aggregates, making the land more vulnerable to wind erosion. The objective of this study was to quantify wind erosion rates for typical conditions at the Marine Corps Air Ground Combat Center, Twentynine Palms, CA, U.S.A. Five Big Spring Number Eight (BSNE) sampler stations were installed at each of five sites. Each BSNE station consisted of five BSNE samplers with the lowest sampler at 0·05 m and the highest sampler at 1·0 m above the soil surface. Once a month, sediment was collected from the samplers for analysis. Occurrence of saltating soil aggregates was recorded every hour using Sensits, one at each site. The site with the most erosion had a sediment discharge of 311 kg m⁻¹ over a period of 17 months. Other sites eroded much less because of significant rock cover or the presence of a crust. Hourly sediment discharge was estimated combining hourly Sensit count and monthly sediment discharge measured using BSNE samplers. More simultaneously measured data are needed to better characterize the relationship between these two and reconstruct a detailed time-series of wind erosion. This measured time-series can then be used for comparison with simulation results from process-based wind erosion models such as the Wind Erosion Prediction System (WEPS), once it has been adapted to the unique aspects of military lands.     

He and Ne isotopes in oceanic crust: implications for noble gas recycling in the mantle

In an attempt to determine the helium and neon isotopic composition of the lower oceanic crust, we report new noble gas measurements on 11 million year old gabbros from Ocean Drilling Program site 735B in the Indian Ocean. The nine whole rock samples analyzed came from 20 to 500 m depth below the seafloor. Helium contents vary from 3.3×10⁻¹⁰ to 2.5×10⁻⁷ ccSTP/g by crushing and from 5.4×10⁻⁸ to 2.4×10⁻⁷ ccSTP/g by melting. ³He/⁴He ratios vary between 2.2 and 8.6 Ra by crushing and between 2.9 and 8.2 by melting. The highest R/Ra ratios are similar to the mean mid-ocean ridge basalt (MORB) ratio of 8±1. The lower values are attributed to radiogenic helium from in situ α-particle production during uranium and thorium decay. Neon isotopic ratios are similar to atmospheric ratios, reflecting a significant seawater circulation in the upper 500 m of exposed crust at this site. MORB-like neon, with elevated ²⁰Ne/²²Ne and ²¹Ne/²²Ne ratios, was found in some high temperature steps of heating experiments, but with very small anomalies compared to air. These first results from the lower oceanic crust indicate that subducted lower oceanic crust has an atmospheric ²⁰Ne/²²Ne ratio. Most of this neon must be removed during the subduction process, if the ocean crust is to be recirculated in the upper mantle, otherwise this atmospheric neon will overwhelm the upper mantle neon budget. Similarly, the high (U+Th)/³He ratio of these crustal gabbros will generate very radiogenic ⁴He/³He ratios on a 100 Ma time scale, so lower oceanic crust cannot be recycled into either MORB or oceanic island basalt without some form of processing.     

Cumulate gabbros from the Southwest Indian Ridge, 54°S-7° 16′ E: implications for magmatic processes at a slow spreading ridge

A diverse volcanic and plutonic rock suite was recovered from the center of the 80 km long ridge segment of the Southwest Indian Ridge (54°S, 7°16 E) between the Islas Orcadas and Shaka Fracture Zones. The cumulus nature of the gabbroic rocks in the suite is indicated by phase, modal and cryptic layering, igneous lamination, and low incompatible element abundances. We present a mass-balance model for calculating the proportions and compositions of cumulus phases and crystallized intercumulus liquid from bulk-rock major element compositions. The model is based on the ability to define a compositional array of basaltic liquids and on the assumption that cumulus minerals are initially in equilibrium with trapped liquid. Calculated proportions of trapped liquid range from 3%–15%; values that are characteristic of adcumulates to mesocumulates. Models of postcumulus crystallization indicate significant enrichments of incompatible elements and buffering of compatible elements in residual trapped liquids, thus explaining the high TiO₂ contents observed in magnesian clinopyroxenes. Cumulus phase assemblages and compositions suggest solidification in shallow level magma chambers, but disequilibrium plagioclase compositions suggest some crystallization at greater depth. Furthermore, basalt compositions projected onto the olivine-clinopyroxenequartz pseudoternary suggest magma generation over a range of pressures (from less than 10 to greater than 20 kb) as well as polybaric fractional crystallization. We suggest that the Southwest Indian Ridge is characterized by low magma supply with small batches of melt that either ascend directly to the surface having undergone limited polybaric crystallization or are trapped in shallow crustal magma chambers where they evolve and solidify to form cumulate gabbros. The adcumulus nature of the gabbros investigated here suggests slow cooling rates typical of large intrusions implying relatively large, but ephemeral magma chambers below segments of the Southwest Indian Ridge.     

Chromian spinel as a petrogenetic indicator in abyssal and alpine-type peridotites and spatially associated lavas

The composition of chromian spinel in alpine-type peridotites has a large reciprocal range of Cr and Al, with increasing Cr# (Cr/(Cr+Al)) reflecting increasing degrees of partial melting in the mantle. Using spinel compositions, alpine-type peridotites can be divided into three groups. Type I peridotites and associated volcanic rocks contain spinels with Cr#<0.60; Type III peridotites and associated volcanics contain spinels with Cr#>0.60, and Type II peridotites and volcanics are a transitional group and contain spinels spanning the full range of spinel compositions in Type I and Type II peridotites. Spinels in abyssal peridotites lie entirely within the Type I spinel field, making ophiolites with Type I alpine-type peridotites the most likely candidates for sections of ocean lithosphere formed at a midocean ridge. The only modern analogs for Type III peridotites and associated volcanic rocks are found in arc-related volcanic and intrusive rocks, continental intrusive assemblages, and oceanic plateau basalts. We infer a sub-volcanic arc petrogenesis for most Type III alpine-type peridotites. Type II alpine-type peridotites apparently reflect composite origins, such as the formation of an island-arc on ocean crust, resulting in large variations in the degree and provenance of melting over relatively short distances. The essential difference between Type I and Type III peridotites appears to be the presence or absence of diopside in the residue at the end of melting.Based on an examination of co-existing rock and spinel compositions in lavas, it appears that spinel is a sensitive indicator of melt composition and pressure of crystallization. The close similarity of spinel composition fields in genetically related basalts, dunites and peridotites at localities in the oceans and in ophiolite complexes indicates that its composition reflects the degree of melting in the mantle source region. Accordingly, we infer from the restricted range of spinel compositions in abyssal basalts that the degree of mantle melting beneath mid-ocean ridges is generally limited to that found in Type I alpine-type peridotites. It is apparent, therefore, that the phase boundary OL-EN-DI-SP +meltOL-EN-SP+melt has limited the degree of melting of the mantle beneath mid-ocean ridges. This was clearly not the case for many alpine-type peridotites, implying very different melting conditions in the mantle, probably involving the presence of water.     

Ferrobasalts from the Spiess Ridge segment of the Southwest Indian Ridge

Highly vesicular, microporphyritic basaltic rocks have been dredged from the slow-spreading Spiess Ridge segment of the Southwest Indian Ridge. All the samples recovered are hyalocrystalline with plagioclase, clinopyroxene and olivine as phenocryst and microphenocryst phases. Titanomagnetite occurs as euhedral microphenocrysts in some of the more evolved samples. In terms of bulk rock and quench glass chemistry the lavas are characterised by highly evolved compositions(e.g. FeO*=10.3−14.2%;TiO₂=2.0−3.4%;K₂O=0.50−1.1%;MgO=6.0−3.5%;Zr=160−274ppm;Nb=14−32ppm) and can be classified as ferrobasalts. Isotopic and incompatible element ratios of the lavas(e.g.⁸⁷Sr/⁸⁶Sr=0.70325−0.70333;Zr/Nb=8.4−11.3;Y/Nb=2.3−1.4) indicate their strongly “enriched” nature (see also Dickey et al. [6]).

Quantitative major and trace element modelling indicates that most of the compositional variations observed can be attributed to low-pressure fractional crystallisation of plagioclase, clinopyroxene and minor olivine and titanomagnetite. The range in composition can be accounted for by up to 65% fractional crystallisation.

We suggest that the extreme differentiation of the Spiess Ridge lavas is related not to spreading rate, but to rate of magma supply. The basaltic melts appear to have evolved in a newly established zone of magmatic activity, associated with the most recent northward jump of the Bouvet triple junction, where they were effectively isolated from significant admixture of primitive magmas.