Cluster Analysis of Petrophysical and Geological Parameters for Separating the Electrofacies of a Gas Carbonate Reservoir Sequence

Natural Resources Research - Assessing reservoir properties and knowing the relationship between different reservoir parameters can significantly help to plan for production from a reservoir. In...     

A Study on the Surface Wettability of Clastic Rocks with Potential Application for CO2 Storage Sites

Natural Resources Research - There have been many studies carried out in the past decades attempting to develop strategies for a safe injection of CO2 into storage sites without leakage and...     

Thermal stability of a layer with permeable boundaries and variable gravitational field

The aim of this paper is to investigate the thermal stability of a fluid layer with permeable boundaries and a variable gravitational field. It is observed that the principle of exchange of stabilities is valid when the layer is heated form below and the complex growth rate of an arbitrary oscillatory mode exists outside of a circle whose radius depends upon the permeability parameter, Prandtl number and wavelength of the mode. In the case of a layer heated from below, gravity increasing upward has a destabilizing effect whereas the permeability parameter has a stabilizing effect.     

Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.     

Arsenic incorporation in a salt marsh ecosystem

Replicate portions of a Delaware salt marsh were enclosed in cylindrical microcosms and exposed to elevated levels of inorganic arsenic (arsenate). All biotic and abiotic components in dosed cylinders rapidly incorporated arsenic. Spartina blades showed the greatest arsenic enrichment, with dosed plants incorporating arsenic concentrations an order of magnitude higher than controls. Spartina detritus and sediments also exhibited greatly elevated arsenic concentrations. Virtually all of the arsenic was incorporated into plant tissue or strongly sorbed to cell surfaces. Thus, elevated arsenic concentrations in estuarine waters will be reflected in living and non-living components of a salt marsh ecosystem, implying that increased arsenic will be available to organisms within the marsh ecosystem.     

B,V surface photometry of the UV continuum galaxy NGC 838

Surface photometry of the UV continuum galaxy NGC 838 has been carried out in theB, V system using photographic plates obtained with the 74 Kottamia telescope, Egypt. Isophotes, luminosity profiles, integrated photographic magnitudes, effective diameters and other photometric parameters are derived.The photoelectrically calibrated total apparent magnitudes areB _T =13.57 with maximum diameters 1.57×1.34 (at threshold _m =27.7 mag.//) andV _T =12.91 with maximum diameters 1.54×1.32 (at threshold _m =27.7 mag./). The integrated colour index(B–V) _T =0.66 and the effective surface brightness _e (B=19.0 mag./) and _e (V=19.7 mag./. The major axis is at position angle =85°±1°.The nucleus of NGC 838 is quite blue (integrated colour(B–V)=0.41 forr ^*<0.1) compared to normal galaxies while the colour becomes redder from the nucleus outwards. The UV excess, H emission and radio continuum emission previously observed from this galaxy by other investigators may be attributed to a recent burst of star formation in the nucleus of the galaxy of duration slightly greater than 2×10⁷ yr.     

Revised age of proximal deposits in the Zagros foreland basin and implications for Cenozoic evolution of the High Zagros

The regionally extensive, coarse-grained Bakhtiyari Formation represents the youngest synorogenic fill in the Zagros foreland basin of Iran. The Bakhtiyari is present throughout the Zagros fold-thrust belt and consists of conglomerate with subordinate sandstone and marl. The formation is up to 3000 m thick and was deposited in foredeep and wedge-top depocenters flanked by fold-thrust structures. Although the Bakhtiyari concordantly overlies Miocene deposits in foreland regions, an angular unconformity above tilted Paleozoic to Miocene rocks is expressed in the hinterland (High Zagros).

The Bakhtiyari Formation has been widely considered to be a regional sheet of Pliocene–Pleistocene conglomerate deposited during and after major late Miocene–Pliocene shortening. It is further believed that rapid fold growth and Bakhtiyari deposition commenced simultaneously across the fold-thrust belt, with limited migration from hinterland (NE) to foreland (SW). Thus, the Bakhtiyari is generally interpreted as an unmistakable time indicator for shortening and surface uplift across the Zagros. However, new structural and stratigraphic data show that the most-proximal Bakhtiyari exposures, in the High Zagros south of Shahr-kord, were deposited during the early Miocene and probably Oligocene. In this locality, a coarse-grained Bakhtiyari succession several hundred meters thick contains gray marl, limestone, and sandstone with diagnostic marine pelecypod, gastropod, coral, and coralline algae fossils. Foraminiferal and palynological species indicate deposition during early Miocene time. However, the lower Miocene marine interval lies in angular unconformity above ~ 150 m of Bakhtiyari conglomerate that, in turn, unconformably caps an Oligocene marine sequence. These relationships attest to syndepositional deformation and suggest that the oldest Bakhtiyari conglomerate could be Oligocene in age.

The new age information constrains the timing of initial foreland-basin development and proximal Bakhtiyari deposition in the Zagros hinterland. These findings reveal that structural evolution of the High Zagros was underway by early Miocene and probably Oligocene time, earlier than commonly envisioned. The age of the Bakhtiyari Formation in the High Zagros contrasts significantly with the Pliocene–Quaternary Bakhtiyari deposits near the modern deformation front, suggesting a long-term (> 20 Myr) advance of deformation toward the foreland.     

Structural elements of the Makran region, Oman sea and their potential relevance to tsunamigenisis

The character of convergence along the Arabian–Iranian plate boundary changes radically eastward from the Zagros ranges to the Makran region. This appears to be due to collision of continental crust in the west, in contrast to subduction of oceanic crust in the east. The Makran subduction zone with a length of about 900 km display progressively older and highly deformed sedimentary units northward from the coast, together with an increase in elevation of the ranges. North of the Makran ranges are large subsiding basins, flanked to the north by active volcanoes. Based on 2D seismic reflection data obtained in this study, the main structural provinces and elements in the Gulf of Oman include: (i) the structural elements on the northeastern part of the Arabian Plate and, (ii) the Offshore Makran Accretionary Complex. Based on detailed analysis of these data on the northeastern part of the Arabian Plate five structural provinces and elements—the Musendam High, the Musendam Peneplain, the Musendam Slope, the Dibba Zone, and the Abyssal Plain have been identified. Further, the Offshore Makran Accretionary Complex shown is to consist Accretionary Prism and the For-Arc Basin, while the Accretionary Prism has been subdivided into the Accretionary Wedge and the Accreted/Colored Mélange. Lastly, it is important to note that the Makran subduction zone lacks the trench. The identification of these structural elements should help in better understanding the seismicity of the Makran region in general and the subduction zone in particular. The 1945 magnitude 8.1 tsunamigenic earthquake of the Makran and some other historical events are illustrative of the coastal region’s vulnerability to future tsunami in the area, and such data should be of value to the developing Indian Ocean Tsunami Warning System.     

Distribution of Boron in Some Egyptian Aquatic Environments

Concentrations of boron in seawater (from four regions along the Alexandria coastline, subjected to land disposal), brackish water (Lake Edku) and drains water (e.g. El-Umum Drain) were determined during the period from February to August 2000. Boron was determined spectrophotometrically by a modified curcumin method. For Lake Edku, boron concentration fluctuated between 0.023 and 0.105 mmol/l. There are several factors that affect the concentration of B in the Lake water: (a) effect of the drainage water via El-Khairy and Barsiek Drains, (b) utilization of boron by hydrophytes, and (c) water exchange through the sea-lake connection. It may be concluded that the level of boron in the Lake water cannot be considered a substantial hazard to the Lake organisms. Boron concentration varied from 0.392 to 0.522 mmol/l in seawater samples and from 0.141 to 0.458 mmol/l in the sites where the water from the drains (El-Umum Drain and El-Noubaria Canal) mixed with the seawater. The broader variation of boron (mmol/l)/salinity ratios for seawater samples (0.0106–0.0138) may be due to that the samples were collected from the upper seawater layers, where contributions from land run-off, atmospheric precipitation and differences in the biota affect the concentration. This revised version was published online in July 2006 with corrections to the Cover Date.     

Comments on the Gravity and Magnetic Anomalies of Saros Bay using Wavelet Approach

In this paper, residual and regional gravity and magnetic anomalies of Saros Bay are separated using wavelet method. Wavelet is one of the modern, stochastic image approaches processing technique in electronics. The vertical, horizontal and diagonal components of wavelet output are evaluated simultaneously and an underground model is obtained by suitable cross-sections. Thus the geological and tectonic properties of Saros Bay are extracted. Our proposed model is confirmed by deep and shallow seismic researches of Turkish Petroleum Cooperation (TPAO). The South-East region of Saros Graben is formed by strike slip Ganos Fault and Anafartalar reverse Fault that lies on the east of Ganos Fault. On the Northwest region, there is strike slip component fault resulting in the Enez Graben. Here we detected two new oval type geological structure, both of them starting from the Eastern direction of Canakkale Dardanelles and but one of them continuing through Gelibolu Peninsuls, while the other tending to the Enez Graben. We think that these structures are the ruins of a very old sea in this region. This revised version was published online in November 2006 with corrections to the Cover Date.