Evaluation of the Risk of Marine Slope Instability: A Pseudo-3D Approach for Application to Large Areas

This article presents a methodology developed to evaluate the instability of submarine slopes that extend over a large area. Special attention was paid to (1) the complex geometry (bathymetry) and the expanse of the slope, (2) the heterogeneity of the sediment, and (3) the distribution of the pore pressure. The safety factor was considered as a spatially varying quantity. The General Formulation (GLE, Fredlund and Krahn 1977), which fully satisfies equilibrium conditions, was used for evaluating the stability of the marine slope. The submarine slope failure, which occurred on 16 October 1979 during the construction of the new Nice airport, was studied in order to test the developed model. Geotechnical parameters were taken from experimental tests carried out by IFREMER on 19 cores extracted at different depths (from 27 m to 1300 m) (Cochonat, Bourillet, and Savoye, 1993; Mulder et al., 1994). Many scenarios were proposed in order to explain the cause of the Nice slope failure (Habib, 1994). In this article, two of those scenarios were tested. Simulation results are presented and discussed.     

Detection of free gas and gas hydrate based on 3D seismic data and cone penetration testing: An example from the Nigerian Continental Slope

We present a new method to characterize free gas, gas hydrates and carbonate concretions occurrence which are considered as high-risk factors for sub-sea developments in the Niger delta. This method is based on the combination of 3D seismic data to the geotechnical site characterizations using piezocone CPTU tests (Cone Penetration Test with additional measurement of the pore water pressure). A special processing of the 3D seismic data has enabled the determination of the interval compressional velocity. Using the effective-medium theory, velocity anomalies (negative and positive) within the first 15 m were translated in gas hydrate and free gas distribution. The calibration of the P wave velocity anomalies was done thanks to in-situ geotechnical testing carried out during two oceanographic surveys (2003 and 2004). Comparison between in-situ testing, recovered cores and the prediction of the gas and the gas hydrate distribution based on the compressional wave velocity have shown that 3D seismic data is a valuable tool to identify heterogeneous areas but the use of the piezocone was essential to discriminate between gas hydrate occurrences and carbonate concretions' presence. Furthermore, in-situ compressional wave velocity (V_p) measurements have clearly demonstrated what it was suspected from the 3D seismic data, the co-existence in the study area between gas hydrate and free gas.     

Southern Oscillation simulation in the OSU coupled upper ocean-atmosphere GCM

The Southern Oscillation is a major component in the interannual variations of global climate. The Oregon State University global climate model, with a dynamically interactive upper ocean, reproduces in qualitatively correct fashion some of the major characteristics of the Southern Oscillation. This model simulates the observed anti-correlation of annually averaged sea-level pressure (SLP) between the eastern Pacific and the Indonesian region, the primary atmospheric signal of the Southern Oscillation. In the composite of the simulated warm events positive sea-surface temperature (SST) anomalies expand eastward towards South America from the tropical western Pacific during the first half of the calendar year. The SST anomalies develop in conjunction with eastward mixed layer current anomalies in the tropical Pacific. In the late summer and early fall anomalously warm water near South America develops and moves westward to merge with the central Pacific anomalies. This lagged development in the eastern Pacific is analogous to the evolution of the 1982/83 and 1986/87 El Ninos. The temperature of the thermocline layer also increases, with the slope of the equatorial Pacific thermocline decreasing in response to the relaxation of the surface forcing. Enhanced precipitation occurs in the mid-Pacific while in the Indian and Australian monsoon regions a deficit occurs. The peak of the warm phase occurs in late northern fall/early winter, somewhat earlier than during observed El Ninos. The cold phase of the Southern Oscillation, enhancement of the zonal circulation, evolves in a fashion similar to the warm phase with the signs of the anomalies reversed, similar to observations. Occurrence of Southern Oscillation in this coarse resolution GCM indicates that high resolution ocean waves do not play a crucial role in the generation of this phenomenon as suggested by Pacific basin models. These results also show that ocean-atmosphere global climate models are useful tools for investigation of time dependent changes on the interannual timescale in addition to their hitherto accepted use for studying equilibrium properties of climate.     

The role of sedimentation rate and permeability in the slope stability of the formerly glaciated Norwegian continental margin: the Storegga slide model

Despite the gently dipping slopes (ca 1°), large-scale submarine slope failures have occurred on the mid-Norwegian continental margin (Storegga, Sklinnadjupet, Traenadjupet), suggesting the presence of special conditions predisposing to failure in this formerly glaciated margin. With a volume estimated between 2,400 and 3,200 km³ and an affected area of approximately 95,000 km², the Storegga slide represents one of the largest and best-studied submarine slides of Holocene age known worldwide. Finite element modeling of slope failure indicates that a large (6.5 < Ms < 7.0) seismic triggering mechanism would not be sufficient to cause failure at more than 110 m below the seabed as observed for the slip planes at Storegga (northern sidewall). This implies that other factors (e.g., liquefaction, strain softening, gas charging, rapid burial) are needed to explain the occurrence of the Storegga slide with a deep surface of failure. In this paper, we discuss the importance of the compaction effect of rapidly accumulated sediments in the slide area. During compaction, sediment grains reorganize themselves, thereby, expelling pore water. Consequently, depending on sedimentation rate and permeability, excess pore pressures might result beneath less permeable sediments. Our modeling and cross-checking illustrate how excess pore pressure generation due to high sedimentation rate could explain the development of layers of weakness, and thus, how such a large slide might have been initiated in deep sediments. Using the highest sedimentation rate estimated in the area (36 and 27 m/kyr between 16.2 and 15 kyr BP), 1D modeling shows excess pore pressure values of around 200 kPa at a depth of 100 m below the seafloor 15 kyr BP and 60 kPa at a depth of 100 m at the time of the slide (8 kyr BP). Excess pore pressure apparently drastically reduced the resistance of the sediment (incomplete consolidation). In addition, 2D modeling shows that permeability anisotropies can significantly affect the lateral extent of excess pore pressure dissipation, affecting, that way, normally consolidated sediments far from the excess pore pressure initiation area.     

Geophysical investigation for shallow subsurface geotechnical problems of Mokattam area,Cairo, Egypt

Nine vertical electrical soundings of Schlumberger configuration were measured with AB/2 = 1–500 m. Manual and computerized interpretation were done to detect the subsurface stratigraphy of the study area. The results show that the subsurface section consists of alternated units of limestone, clay, marly limestone and dolomitic limestone and the thickness of clay unit ranged from 10 to 40 m. Nine dipole–dipole sections have also been constructed to give a clearer picture of the subsurface at the study area. The length of each dipole–dipole section is 235 m, with a electrode spacing ranging between 5 and 25 m. The Res2Dinv software was used for processing and interpretation of field data. The dipole–dipole sections at the upper plateau display high resistivity values at most parts of the plateau. Twelve shallow seismic refraction profiles are measured at selected locations for the dipole sections to define the interface between the fractured limestone and the upper surface of the clay layer. Each profile consists of 24 geophones with a geophone spacing of 2–3 m. Interpretation of seismic data indicates that the surface layer of the upper plateau consists of fractured limestone with a velocity range of 1.16–1.56 km/s and another layer of compacted clay with a velocity range of 1.38–1.88 km/s. Furthermore, the surface layer of the middle plateau consists of marl and marly limestone with a velocity about 2.1 km/s and its underlying layer consists of massive limestone with a velocity of 4.94 km/s.     

Geospatial technology and structural analysis for geological mapping and tectonic evolution of Feiran–Solaf metamorphic complex,South Sinai,Egypt

The Sinai Peninsula constitutes an important district of the Egyptian lands where it forms a triangular portion in northeastern Egypt. The southern Sinai metamorphic complexes are the northern uppermost part of the Arabian–Nubian Shield revealing the upper and middle crust from the East African Orogeny, in which they tectonically evolved. The Feiran–Solaf metamorphic complex (FSMC) of Sinai, Egypt is one of the highest grades metamorphic complexes of a series of basement domes that trends NW and crops out throughout the Arabian–Nubian Shield. The main aim of the present study is to apply the geospatial technology and to represent the capability of the geospatial technology to estimate the combined influence of lithology and structure studies, and to construct the lithological and structural maps of FSMC. Furthermore, detailed structural analysis is carried out to reveal the different ductile and brittle deformational events and proposed the tectonic evolutionary model for the study area. Mainly geospatial technology and structural analysis software have been used to go well with the aim of the present study. Developing specific image processing of satellite images and structural analysis were succeeded to discriminate the various lithological rock units, and the geological structural features of the FSMC, using geographic information system tools to construct the different thematic maps, were extracted. The present detailed investigations of the enhanced satellite images, structural analysis, and field verification reveal that the FSMC reached its present tectonic setting through more than four deformational phases concluding that the Pan-African Najd Fault System continued in Sinai and was reactivated during Red Sea tectonics as indicated by the dextral shear zone (Rihba) bordering the northern side of the FSMC.     

Contribution of atmospheric processes to the degradation of air quality: case study (Sohar Industrial Area,Oman)

The impact of the air pollution generated by any industrial activities may be further aggravated if the location of the industrial area is exposed to certain atmospheric characteristics. Under such conditions, the likelihood of accumulation of local air pollution is high. This paper uses two approaches (statistical and numerical simulation) to investigate the contribution of atmospheric processes towards degradation of air quality. A case study of the two approaches was conducted over Sohar Industrial Area in the Sultanate of Oman. Measured wind data were used to account for specific atmospheric characteristics such as stagnation, ventilation, and recirculation using the statistical approach. In the second approach, numerical weather prediction model was used to simulate mesoscale circulation phenomena such as sea breeze and its contribution to the processes affecting the air quality. The study demonstrates that the atmospheric processes appear to contribute substantially to the degradation of air quality in the Sohar Industrial Area. The statistical analysis shows that the atmospheric dilution potential of Sohar Industrial Area is prone to stagnation and recirculation, rather than ventilation. Moreover, model simulation shows that there is a seasonal variation in the contribution of atmospheric processes to the degradation of the air quality at Sohar Industrial Area.     

Geologic and hydrologic settings for development of freshwater lenses in arid lands

Satellite observations were used to test the validity of previously identified favourable conditions for the formation of freshwater lenses, identify additional potential occurrences, and model modern potential recharge in the Raudhatain Watershed (3696) in northern Kuwait. Favourable conditions include infrequent yet intensive precipitation events, drainage depressions to collect the limited runoff, and presence of conditions (e.g. high infiltration capacity) that promote groundwater recharge and preservation (e.g. underlying saline aquifer) of infiltrating groundwater as freshwater lenses floating over saline aquifer water due to differences in density. Specifically, the following field and satellite‐based observations were noted for the Raudhatain Watershed: (1) Over ~30 precipitation events were identified from the Tropical Rainfall Measuring Mission precipitation data (1998–2009); (2) slope is gentle (2 m/km), and the surface is largely (80%) covered by alluvial deposits with high infiltration capacities (up to 9 m/day); (3) no flows and long‐term ponding were reported at the watershed outlet or detected from Landsat thematic mapper images; (4) infiltration is high based on increases in soil moisture content (from an advanced microwave scanning radiometer) and vegetation index following large precipitation events; and (5) freshwater lenses that overlie highly saline [total dissolved solids (TDS): >35 000] unconfined aquifers underlying the watershed are absent in the southern regions, where infiltrating fresh water mixes with the less saline groundwater (TDS: <10 000). Twenty potential locations (size: 1 to 75 km²) for freshwater lens development were identified in northern Kuwait, and continuous rainfall–runoff models (Soil Water and Assessment Tool) were applied to provide a first‐order estimation of the average annual recharge in the watershed (127 × 10⁶ m³) and freshwater lenses (8.17 × 10⁶ m³). Results demonstrate the settings for enhanced opportunities for groundwater recharge, outline the amounts of and preservation conditions for the groundwater feeding the freshwater lenses, and highlight potential applications and locations of freshwater lenses in similar settings elsewhere in the Arabian Peninsula and beyond. Copyright © 2013 John Wiley & Sons, Ltd.     

Combining TEM/resistivity joint inversion and magnetic data for groundwater exploration: application to the northeastern part of Greater Cairo,Egypt

This paper presents the combination of two complementary methods, magnetic and joint inversion of resistivity/TEM data, as an effective approach to characterize groundwater reservoirs. Twenty stations of transient electromagnetic (TEM) and vertical electrical soundings (VES) were measured and interpreted using a joint inversion technique to evaluate the subsurface low resistivity zones connected to the groundwater reservoir. A complementary survey including 871 land magnetic stations was carried out at the same area to detect the upper surface of the basaltic sheet, which represents the bottom of the Miocene aquifer in the study area. The geological log from one borehole drilled in the zone was used to partially calibrate the calculated models. The results revealed that the study area consists of five different geological units with ages ranging from Paleogene (Oligocene) to Quaternary. The methodology provides good results at a very low cost when compared with drilling boreholes.