Hydrochemical characteristics and the effects of irrigation on groundwater quality in Harran Plain,GAP Project,Turkey

Improper design, faulty planning, mismanagement and incorrect operation of irrigation schemes are the principle reasons for the deterioration of groundwater quality in a large number of countries, in particular in semi-arid and arid regions. The aim of this study is to determine the dimensions of groundwater quality after surface irrigation was begun in the semi-arid Harran Plain. Physical and chemical parameters of the groundwater including pH, temperature, electrical conductivity (EC), sodium, potassium, calcium, magnesium, chloride, bicarbonate, sulphate, nitrate, nitrite, ammonium, total phosphorus, total organic carbon and turbidity were determined monthly during the 2006 water year. The quality of the groundwater in the study area was assessed hydrochemically in order to determine its suitability for human consumption and agricultural purposes. In the general plain, the EC values measured were considerably above the guide level of 650 μS/cm, while nitrate in particular was found in almost all groundwater samples to be significantly above the maximum admissible concentration of 50 mg/l for the quality of water intended for human consumption as per the international and national standards. Total hardness reveals that a majority of the groundwater samples fall in the very hard water category. Interpretation of analytical data shows that Ca–HCO₃ and Ca–SO₄ are the dominant hydrochemical facies in the study area.     

A quantitative analysis on the Egyptian Mediterranean waters

ＡｑｕａｎｔｉｔａｔｉｖｅａｎａｌｙｓｉｓｏｎｔｈｅＥｇｙｐｔｉａｎＭｅｄｉｔｅｒｒａｎｅａｎｗａｔｅｒｓ￥Ｍ．Ａ．ＳａｉｄａｎｄＦ．Ｍ．Ｅｉｄ（ＲｅｃｅｉｖｅｄＳｅｐｔｅｍｂｅｒ２１，１９９３１ａｃｃｆｅｐｔｅｄＪａｎｕａｒｙ１５，１９９４）Ａｂｓ...     

Response-based method for determining the extreme behaviour of floating offshore platforms

The accurate prediction of extreme excursion and mooring force of floating offshore structures due to multi-variete environmental conditions which requires the joint probability analysis of environmental conditions for the worst case situation is still impractical as the processing of large amount of met-ocean data is required. On the other hand, the simplified multiple design criteria (e.g. the N-year wave with associated winds and currents) recommended by API known as traditional method does lead neither to the N-year platform response nor to the N-year mooring force. Therefore, in order to reduce the level of conservatism as well as uncertainties involved in the traditional method the response-based method can be used as a reliable alternative approach. In this paper this method is described. In order to perform the calculations faster using large databases of sea states, Artificial Neural Networks (ANN) is designed and employed. In the paper the response-based method is applied to a 200,000 tdw FPSO and the results are discussed.     

Re-appraisal of seismicity and seismotectonics in the north-eastern Algeria Part II: 20th century seismicity and seismotectonics analysis

The main objective of the research work isthe homogenisation of the two recentAlgerian earthquake catalogues for thecommon covered period of time, from 1900 to1990, for the region under considerationlimited by [33^°N–38^°N,4^°E-9.5^°E] and the updatingof the catalogue for the twentieth century(1900–2000). To mitigate the deficiencyof the incompleteness of catalogue, aneffort was made to establish a correlationbetween surface-wave magnitude Ms andbody-wave magnitude m_b in the form ofMs = a + b (m_b). A complete, exact andhomogeneous earthquake catalogue as much aspossible, comprising 870 seismic events,has been compiled. Seismicity analysis ofthe region shows a strong concentration ofseismicity along a band of no more than400 km width oriented mainly in theeast-west direction parallel to the coast.Moreover, earthquakes in this zone arerather associated to strike-slip mechanism.The focal mechanism show a regional stressregime that corresponds to horizontalcompression in NW-SE to N-S direction. As aresult of the review of the seismicity ofnorth-eastern Algeria from the compilationof checked and corrected data and itscorrelation with other geologic andgeophysical investigations based ondocumentary sources, it was possible toconstruct a most complete seismotectonicmap. It leads also to delineate fourseismogenic zones in the Tellian Atlas, aless important zone in the Saharan Atlas, asixth zone at the boundary of both Atlasand finally, a seventh one along thecoastal zone. The seismicity-active faultscorrelation of some of these defined zonesis examined in details with a specialattention to the Saharan Atlas zone, theHodna and Biban zone as well as Soummam andBabor zone where further research workallowed to find some neotectonic featuresconsidered as a significant sign of recenttectonic activity.     

Seismic response of a cable‐stayed bridge deck under multi‐component non‐stationary random ground motion

A Markov method of analysis is presented for obtaining the seismic response of cable‐stayed bridges to non‐stationary random ground motion. A uniformly modulated non‐stationary model of the random ground motion is assumed which is specified by the evolutionary r.m.s. ground acceleration. Both vertical and horizontal components of the motion are considered to act simultaneously at the bridge supports. The analysis duly takes into account the angle of incidence of the earthquake, the spatial correlation of ground motion and the quasi‐static excitation. A cable‐stayed bridge is analysed under a set of parametric variations in order to study the non‐stationary response of the bridge. The results of the numerical study indicate that (i) frequency domain spectral analysis with peak r.m.s. acceleration as input could provide more r.m.s. response than the peak r.m.s. response obtained by the non‐stationary analysis; (ii) the longitudinal component of the ground motion significantly influences the vertical vibration of the bridge; and (iii) the angle of incidence of the earthquake has considerable influence on the deck response. Copyright © 2003 John Wiley & Sons, Ltd.     

Landslide hazard mapping in the Constantine city,Northeast Algeria using frequency ratio,weighting factor,logistic regression,weights of evidence,and analytical hierarchy process methods

Landslides constitute the most widespread and damaging natural hazards in the Constantine city. They represent a significant constraint to development and urban planning. In order to reduce the risk related to potential landslide, there is a need to develop a comprehensive landslide hazard map (LHM) of the area for an efficient disaster management and for planning development activities. The purpose of this research is to prepare and compare the LHMs of the Constantine city, by applying frequency ratio (FR), weighting factor (Wf), logistic regression (LR), weights of evidence (WOE), and analytical hierarchy process (AHP) methods used in a framework of the geographical information system (GIS). Firstly, a landslide inventory map has been prepared based on the interpretation of aerial photographs, high resolution satellite images, fieldwork, and available literature. Secondly, eight landslide-conditioning factors such as lithology, slope, exposure, rainfall, land use, distance to drainage, distance to road, and distance to fault have been considered to establish LHMs using the FR, Wf, LR, WOE, and AHP models in GIS. For verification, the obtained LHMs have been validated comparing the LHMs with the known landslide locations using the receiver operating characteristics curves (ROC). The validated results indicate that the FR method provides more accurate prediction (86.59 %) of LHMs than the WOE (82.38 %), AHP (77.86 %), Wf (77.58 %), and LR (70.45 %) models. On the other hand, the obtained results showed that all the used models in this study provided a good accuracy in predicting landslide hazard in Constantine city. The established maps can be used as useful tools for risk prevention and land use planning in the Constantine region.     

Iron oxide copper-gold (IOCG) mineralization at the Imiter inlier,Eastern Anti-Atlas,Morocco

The Imiter inlier at the eastern Anti-Atlas chain (Morocco) hosts a world-class epithermal Ag-Hg deposit, and several occurrences of sulfide-magnetite mineralization. These occurrences are confined to transcurrent faults that cut mildly to highly potassic I- and S-type granite intrusions (e.g., Igoudrane, Bou Teglimt, Taouzzakt and Bou Fliou).In this contribution, we present new field, petrographic and microanalytical data of the Bou Fliou sulfide-magnetite mineralization in the northwestern part of the Bou Teglimt granodiorite intrusion (567?±?6Ma). Field and microscopic investigations reveal pervasive silicification and potassic alteration associated with iron oxides-rich (>10?vol %) veins, stockworks, and breccias along NE-SW faults. The ore minerals are mainly magnetite, hematite, chalcopyrite, pyrite, sphalerite, Ag-galena, cobaltite, and less abundant Bi-sulfosalts (i.e., cosalite, galenobistmuthite, and llilanite-gustavite). The low-titanium iron oxides (magnetite and hematite), widespread iron-rich breccia, association with crustal scale fault zone, pervasive alteration, and overprinting mineral assemblages suggest a shallow level IOCG-style mineralization. High-order splays of the major fault zone could have provided effective traps for magmatic and basinal Cu and Zn-Pb hydrothermal fluids. The ～550 Ma intrusive phases in the region could have contributed by fluid, elements or heat in a local effective blumbing. The mineralogical and ore textural criteria reflecting ore formation at a realtively shallow crustal environment, but a fluid inclusion study is needed to characterize the ore fluids and mechanism of ore deposition.     

On the Application of the Novel Thin Spray-on Liner (TSL): A Progress Report in Mining Operations

Stability is the main problem in underground excavations that can result in rock-related accidents or closure of mines. This is often controlled by the geological condition of the rockmass and the in situ stress field where excavation is being carried out. Over the years, conventional support systems such as bolts, shotcrete and mesh have been the standard support systems used in difficult ground conditions to maintain stability of underground openings. The novel Thin Spray Liner (TSL) is a technology with an improvement in terms of support capabilities for difficult geological conditions. This technology is predicted to replace conventional support systems, as it offers a significant yielding capacity that is better than that of the traditional techniques of controlling strata. The performance of the TSL lies between that of shotcrete and wire mesh. The TSL has numerous advantages regarding rock reinforcement such as rapid curing period, fast application, high tensile strength, high adhesion properties that prevent movement of rock keyblocks, improved cycle times, reduction in material-handling compared to shotcrete, and a significant ability to penetrate joints. These advantages increase the allowance for mechanisation and improvement of safety in excavations. Despite various benefits of TSLs, there are shortcomings which make end-users to be sceptical about the technology. This study provides a detailed review of the mechanism, properties, composition and types, as well as the general and mining applications of TSLs. It also describes the challenges faced by the mining industry and other end-users in accepting the technology as a solution for stability issues in underground openings. In addition, some insightful suggestions are made as recommendations for future work on the development of suitable, effective and efficient thin surface rock support technology within limitations/constraints.

     

Distribution and Influence of Iron Phases the Physico—Chemical Properties of Phyllosilicates

Clay minerals from different Cretaceous stratigraphic successions of Egypt were investigated using XRD,DTA,dissolution analysis(DCB),IR,Moessbauer and X-ray Electron Spin Resonance(ESR) spectroscopes.The purity of the samples and the degree of their structural order were determined by XRD.The location of Fe in the octahedral sheet is characterized by absorption bands at-875cm^-1 assigned as Al-OH-Fe which persist after chemical dissolution of free iron.The Moessbauer spectra of these clays show two doublets with isomer shift and quadrupole splitting typical of octahedrally coordinated Fe^3 ,in addition to third doublet with hyperfine parameter typical of Fe^2 in the spectra of Abu-Had kaolinite (H) sample.Six-lines magnetic hyperfine components which are consistent with those of hematite are confirmed in the spectra of both Isel and Rish kaolinite samples.Goethite was confirmed by both IR and DTA.Multiple nature of ESR of these clays suggested structural Fe in distorted octahedral symmetry as well as non-structural Fe.Little dispersion and low swelling indices as well as incomplete activation of the investigated montmorillonite samplas by NaCO3 appear to be due to incomplete disaggregation of montmorillonite particles.This can be explained by the ability of Fe-gel to aggregate the montmorillonite into pseudo-particles and retard the rigid-gel structure.However,extraction of this ferric amorphous compound by dithonite treatment recovers the surface properties of the montmorillonite samples.On the other hand,the amount and site occupation of Fe associated with kaolinite samples show an inverse correlation with the parameters used to describe the degree of crystallinity perfection,color,brightness and vitrification range of these kaolinite samples.