Characterization of the Si:As Blocked Impurity Band (BIB) Detector in Keck's Long Wavelength Spectrometer (LWS)

Keck's Long Wavelength Spectrometer (LWS), is the facility instrument used for imaging and spectroscopy in the wavelength range of 3–28 μm at the Keck Observatory. LWS uses an 128 × 128 Si:As blocked impurity band (BIB) array manufactured by the Boeing Corporation. This paper discusses the method used for optimizing the detector's operating parameters at a temperature of 8.5 K and bias voltage of 1.2 V. A process for characterizing detective quantum efficiency of BIB detectors is also presented. This revised version was published online in July 2006 with corrections to the Cover Date.     

Quaternary stratigraphy of the buried valleys of the lower Red Deer River,Alberta, Canada

The Quaternary fills of the buried valleys of southern Alberta and Saskatchewan have provided a wealth of information for the reconstruction of the glacial-interglacial record of the western plains of Canada, and this paper reports on the previously unstudied stratigraphy of the buried Calgary Valley and its former tributaries in the lower Red Deer River area. We attempt to differentiate Empress Group sediments, which potentially relate to pre-glacial, interglacial/ interstadial and post-glacial lake and river deposition, using sedimentology, stratigraphy and palaeoecology. Twenty-nine stratigraphical logs indicate that Empress Group sediments have infilled a considerably large area of badlands and tributary coulees that once drained into the Calgary Valley, located 15 km to the north of Dinosaur Provincial Park. Radiocarbon dates of 52.4 ka, 27.4 ka and > 42.4 ka and glacially modified quartz grains suggest that at least some of the valley fills date to interglacial or interstadial periods and may be mid-Wisconsinan in age. However, outcrops of an older till overlying other valley fills suggest that the buried valleys were only partially excavated during interglacials/interstadials and that older (even pre-glacial) sediments could have survived. Subglacial channels, recognisable on air photographs, largely coincide with buried valley positions due to the preferential excavation of the Quaternary sediment by meltwater and are filled with post-glacial lake sediment from which a radiocarbon date of 16 ka BP was obtained. Pre-glacial and glacial/post-glacial Empress Group sediments are lithologically indistinct but cover a large time span in southern Alberta.     

Origin and evolution of the Steamboat Springs siliceous sinter deposit, Nevada, U.S.A.

Siliceous hot spring deposits from Steamboat Springs, Nevada, U.S.A., record a complex interplay of multiple, changing, primary environmental conditions, fluid overprinting and diagenesis. Consequently these deposits reflect dynamic geologic and geothermal processes. Two surface sinters were examined—the high terrace, and the distal apron-slope, as well as 13.11 m (43 ft) of core material from drill hole SNLG 87-29. The high terrace sinter consists of vitreous and massive-mottled silica horizons, while the distal deposit and core comprise dominantly porous, indurated fragmental sinters. Collectively, the three sinter deposits archive a complete sequence of silica phase diagenetic minerals from opal-A to quartz. X-ray powder diffraction analyses and infrared spectroscopy of the sinters indicate that the distal apron-slope consists of opal-A and opal-A/CT mineralogy; the core yielded opal-A/CT and opal-CT with minor opal-A; and the high terrace constitutes opal-C, moganite, and quartz. Mineralogical maturation of the deposit produced alternating nano–micro–nano-sized silica particle changes. Based on filament diameters of microbial fossils preserved within the sinter, discharging thermal outflows fluctuated between low-temperatures (< 35 °C, coarse filaments) and mid-temperatures ( 35–60 °C, fine filaments). Despite transformation to quartz, primary coarse and fine filaments were preserved in the high terrace sinter. AMS ¹⁴C dating of pollen from three horizons within core SNLG 87-29, from depths of 8.13 to 8.21 m (26′8″ to 26′11″), 10.13 to 10.21 m (33′3″ to 33′6″), and 14.81 to 14.88 m (48′7″ to 48′10″), yielded dates of 8684 ± 64 years, 11,493 ± 70 years and 6283 ±60 years, respectively. In the upper section of the core, the stratigraphically out-of-sequence age likely reflects physical mixing of younger sinter with quartzose sinter fragments derived from the high terrace. Within single horizons, mineralogical and morphological components of the sinter matrix were spatially patchy. Overall, the deposit was modified by sub-surface flow of alkali-chloride thermal fluids depositing a second generation of silica, and periodically, by acidic steam condensate formed during periods when the water table was low. Local faulting produced considerable fracturing of the sinter. Hence, the Steamboat Springs sinter experienced a complex history of primary and secondary hydrothermal, geologic and diagenetic events, and their inter-relationships and effects are locked within the physical, chemical and biological signatures of the deposit.     

The Fe-C system at 5 GPa and implications for Earth’s core

Earth’s core may contain C, and it has been suggested that C in the core could stabilize the formation of a solid inner core composed of Fe₃C. We experimentally examined the Fe-C system at a pressure of 5 GPa and determined the Fe-C phase diagram at this pressure. In addition, we measured solid metal/liquid metal partition coefficients for 17 trace elements and examined the partitioning behavior between Fe₃C and liquid metal for 14 trace elements. Solid metal/liquid metal partition coefficients are similar to those found in one atmosphere studies, indicating that the effect of pressure to 5 GPa is negligible. All measured Fe₃C/liquid metal partition coefficients investigated are less than one, such that all trace elements prefer the C-rich liquid to Fe₃C. Fe₃C/liquid metal partition coefficients tend to decrease with decreasing atomic radii within a given period. Of particular interest, our 5 GPa Fe-C phase diagram does not show any evidence that the Fe-Fe₃C eutectic composition shifts to lower C contents with increasing pressure, which is central to the previous reasoning that the inner core may be composed of Fe₃C.     

Radon transfer from groundwater used in showers to indoor air

Estimation of Rn transfer from water to indoor air based on multi-day measurements may underestimate alpha exposure that occurs at short time scales in confined spaces, such as from showering, in houses with high Rn activities in the water supply. In order to examine one such incremental increase in exposure, variations in Rn in water and indoor air in 18 houses with private wells in western North Carolina (USA) were investigated. Radon in well water ranged from 158 to 811 Bq L⁻¹ (median 239 Bq L⁻¹). After 20-min showers in bathrooms with closed doors, peak Rn in air increases (above background) ranged from 71 to 4420 Bq m⁻³ (median 1170 Bq m⁻³). Calculated transfer coefficients at the scale of a 40-min closed bathroom (20-min shower plus 20 min post-shower) are described by a lognormal distribution whose geometric mean exceeds the widely-used ∼10⁻⁴ whole-house transfer coefficient by about one order of magnitude. As short-lived decay products grow from shower-derived Rn, short-term alpha energy exposure occurs in bathrooms in addition to the exposure caused by Rn mixed throughout the volume of the house. Due to the increasing ratio of Rn decay products to Rn, alpha energy exposure is greatest several minutes after the shower is turned off. For a 7.2-min shower with 10 min of additional exposure before opening the door, a geometric mean 5.6% increase in exposure over the ∼10⁻⁴ whole-house transfer coefficient derived from longer measurement periods was estimated. In addition to Rn activity in water, short-term shower exposure to Rn progeny depends on exposure time, ventilation, attachment and deposition, among other variable factors that characterize individual houses and residents.     

The depletion of oil

The trend of previous estimates of the world's ultimate recovery of oil suggests a figure of 1650 BBO, of which 1438 BBO have been discovered and 978 BBO remain to be produced. Some large reported reserve figures are questioned. Importance is attached to the mid-point of depletion when rising production tends to give way to decline. The share of the world's supply coming from six Middle East countries is set to continue to rise from its 1986 low of 16% to as much as 50% by 2010, with the likely consequence of higher oil prices and serious political implications. The world is rapidly approaching a turning point when it has to face the consequences of an irreversible decline in oil production.