Isotope fractionation of neon during stepheating extraction?: a comment on ‘Re‐interpretation of the existence of a primitive plume under Australia based on neon isotope fractionation during step heating’ by Gautheron and Moreira (2003)

Using a Rayleigh distillation fractionation model, we calculate that the maximum isotope fractionation potentially achievable is less than 5% during the early stages of gas release from a sample. Our calculation corrects the erroneous conclusions of Gautheron and Moreira (2003), who re‐interpreted the plume‐like neon isotopic compositions found in metasomatic apatite from a south‐eastern Australian xenolith (Matsumoto et al., 1997) to be the result of Rayleigh‐type isotope fractionation of originally MORB‐type neon during stepheating gas extraction. We stress that the modelling of neon isotopic fractionation by Gautheron and Moreira (2003) is incorrect, and that the finding of a plume‐like neon isotopic composition in the apatite by Matsumoto et al. (1997) remains a quite valid and robust conclusion.     

The response of the mid-latitude thermospheric wind to magnetic activity

Observations of the thermospheric wind at a mid-latitude station have been made using a Fabry-Perot interferometer to measure the Doppler shift of the nighttime OI emission at 630 nm. The results from 12 summer nights show that the zonal wind has a distinct feature associated with magnetic activity. The zonal wind first reverses and becomes westward. The maximum strength of the westward wind, its duration, and the maximum strength of the subsequent eastward wind all increase with increasing magnetic activity. The meridional wind is less consistent in its behaviour. It is normally equatorward but during magnetic activity it can increase, decrease, or even reverse, although it is consistently equatorward and of increased strength after 02.00 L.T. The initial reversal of the zonal wind is consistent with changes in the wind expected as a result of convective electric fields penetrating to mid-latitudes indicating that these electric fields modify the mid-latitude wind pattern before effects due to auroral heating reach mid-latitudes. The reversal of the zonal wind back to eastward may also be the result of electric field effects. The large variability of the meridional wind, to the extent that it becomes poleward at times, indicates the importance of wind sources equatorward of the observatory.     

Roles of Biogeochemical Processes in the Oceanic Carbon Cycle Described with a Simple Coupled Physical-Biogeochemical Model

To evaluate the contribution of biogeochemical processes to the oceanic carbon cycle and to calculate the ratio of calcium carbonate to organic carbon downward export, we have incorporated biological and alkalinity pumps in the yoked high-latitude exchange/interior diffusion-advection (YOLDA) model. The biogeochemical processes are represented by four parameters. The values of the parameters are tuned so that the model can reproduce the observed phosphate and alkalinity distributions in each oceanic region. The sensitivity of the model to the biogeochemical parameters shows that biological production rates in the euphotic zone and decomposition depths of particulate matters significantly influence horizontal and vertical distributions of biogeochemical substances. The modeled vertical fluxes of particulate organic phosphorus and calcium carbonate are converted to vertical carbon fluxes by the biological pump and the alkalinity pump, respectively. The downward carbon flux from the surface layer to the deep layer in the entire region is estimated to be 3.36 PgC/yr, which consists of 2.93 PgC/yr from the biological pump and 0.43 PgC/yr from the alkalinity pump, which is consistent with previous studies. The modeled rain ratio is higher with depth and higher in the Pacific and Indian Oceans than in the Atlantic Ocean. The global rain ratio at the surface layer is calculated to be 0.14 to 0.15. This value lies between the lower and higher ends of the previous estimates, which range widely from 0.05 to 0.25. This study indicates that the rain ratio is unlikely to be higher than 0.15, at least in the surface waters.     

Reliability-Based Optimal Design for Very Large Floating Structure

1 .ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅａｐｐｒａｉｓａｌｏｆａｇｏｏｄｄｅｓｉｇｎｆｏｒａｖｅｒｙｌａｒｇｅｆｌｏａｔｉｎｇｓｔｒｕｃｔｕｒｅ(ＶＬＦＳ)ｔｈａｔｗｉｌｌｓｅｒｖｅｉｎａｓｐｅｃｉ ｆｉｅｄｏｃｅａｎａｒｅａｒｅｑｕｉｒｅｓｔｈａｔｔｈｅｓｔｒｕｃｔｕｒａｌｓｙｓｔｅｍｂｅｅｃｏｎｏｍｉｃａｌｌｙｄｅｓｉｇｎｅｄ ,ｔｈｅｒｅｑｕｉｒｅｍｅｎｔｓｆｏｒｉｔｓｆｕｎｃｔｉｏｎｂｅｓａｔｉｓｆｉｅｄａｎｄｔｈｅｓｔｒｕｃｔｕｒｅｋｅｅｐｓｓｔａｂｌｅｉｎｉｔｓｗｈｏｌｅｓｅｒｖｉｃｅｐｅｒｉｏ…     

An Ecosystem Model Coupled with Nitrogen-Silicon-Carbon Cycles Applied to Station A7 in the Northwestern Pacific

A model based on that of Kishi et al. (2001) has been extended to 15 compartments including silicon and carbon cycles. This model was applied to Station A7 off Hokkaido, Japan, in the Northwestern Pacific. The model successfully simulated the observations of: 1. a spring bloom of diatoms; 2. large seasonal variations of nitrate and silicate concentrations in the surface water; and 3. large inter-annual variations in chlorophyll-a. It also reproduced the observed features of the seasonal variations of carbon dioxide partial pressure (pCO₂)—a peak in pCO₂ in winter resulting from deep winter convection, a rapid decrease in pCO₂ as a result of the spring bloom, and an almost constant pCO₂ from summer through fall (when the effect of increasing temperature cancels the effect of biological production). A comparison of cases with and without silicate limitation shows that including silicate limitation in the model results in: 1. decreased production by diatoms during summer; and 2. a transition in the dominant phytoplankton species, from diatoms to other species that do not take up silicate. Both of these phenomena are observed at Station A7, and our results support the hypothesis that they are caused by silicate limitation of diatom growth. This revised version was published online in July 2006 with corrections to the Cover Date.     

Geological and geomorphological characteristics of landslides triggered by the 2004 Mid Niigta prefecture earthquake in Japan

The 2004 Mid Niigta prefecture earthquake (M_JMA 6.8) triggered more than one thousand landslides in the Miocene to Quaternary sedimentary rocks in Japan. The most common landslides were shallow disrupted landslides on steep slopes, which has been common in many previous disastrous earthquakes in the world. The Mid Niigta prefecture earthquake also triggered more than one hundred deep landslides, providing valuable information on the conditions for their occurrence. A field investigation and the interpretation of aerial photographs taken before and after the earthquake suggest that reactivation of existing landslides and undercutting of slopes are the most important factors for deep landslides to be triggered by earthquakes. In addition, planar sliding surfaces seem to be essential for the generation of catastrophic landslides triggered by this earthquake. Planar bedding–parallel sliding surfaces were formed at the boundary between the overlying permeable sandstone and underlying siltstone or along the bedding planes of alternating beds of sandstone and siltstone. Sliding surfaces along the slope-parallel oxidation front were formed in the area of black mudstone. New landslides (rockslide-avalanches) occurred with the sliding surfaces in a several-cm thick tuff interbedded in siltstone. One rockslide-avalanche occurred on a slope where buckling deformation preceded the earthquake. Gentle valley bottom sediments were mobilized in many locations, probably because they were saturated and partial liquefaction had occurred due to the earthquake shaking.     

Recent developments in seismically isolated buildings in Japan

The Building Standard Law of Japan and related Enforcement Order and Notifications have been substantially revised since the year 2000 to introduce a performance-based regulatory and deregulation system for building control systems. Up to then, time-history analyses were mandatory for isolated buildings and had to be specially approved by the Minster of the Ministry of Construction (MOC). Simplified design procedures based on the equivalent linear method for seismically isolated buildings have been issued as “Notification 2009 — Structural calculation procedure for buildings with seismic isolation” from MOC, and are now integrated into the Ministry of Land, Infrastructure, and Transportation (MLIT). Along with Notification 2009, “Notification 1446 of year 2000 — Standard for specifications and test methods for seismic isolation devices” was also issued. Buildings with heights equal to or less than 60m and that are designed according to these Notifications, including base isolated buildings, only need approval from local building officials, and no longer require the special approval of the Minister of MLIT. This paper summarizes: 1) some statistics related to buildings with seismic isolation completed up to the end of 2001; 2) simplified design procedures required by Notification 2009 of year 2000; and 3) performance of seismic isolation devices required by Notification 1446 of year 2000.