Organotemplate silica deposition in Neoproterozoic deep-marine environments: evidence from the Penganga Group, Adilabad, India

Silica in bedded cherts interstratified with manganese carbonates in a deep‐water carbonate ramp succession of the Neoproterozoic Penganga Group, India, displays film‐like, spherical to rod‐shaped, and tubular branching microstructures. The microstructures resemble mineralized extracellular polysaccharides, biofilms and bacterial morphologies. The microstructures suggest silicification by nucleation of silica on organic‐templates or indirectly as sorbed species accumulating on organic templates. Given that similar microstructures have also been documented in Archean cherts it is proposed that organotemplates might have been an important sink for the deposition of silica in Precambrian deep‐water marine environments.     

Finite-element analysis of time-dependent large-deformation problems

An updated Lagrangian finite-element formulation has been developed for time-dependent problems of soil consolidation involving finite deformations. Large plastic strains as well as rotations occur in such problems and nominal stress measures are introduced in the formulation to redefine stresses. This leads to corrective terms for equilibrium and yield violations in addition to geometric stiffening terms in the governing integral equations. The soil is considered to be either a linear elastic or an elastoplastic, critical-state material. Some simple numerical examples are studied to validate the formulation, followed by a detailed analysis of the problem of penetration of a pile into soil. The results of this problem are viewed with emphasis on the physical interpretation and practical significance.     

Paleosol at the Archean—Proterozoic contact in NW India revisited: Evidence for oxidizing conditions during paleo-weathering?

A number of fine-grained sericite bearing pelitic, schistose lithologies occur along the Archean (Banded Gneiss Complex)-Proterozoic (Aravalli Supergroup) contact (APC) in the Udaipur valley in NW Indian craton. These Al-rich lithologies (subsequently metamorphosed) have been described as ‘paleosols’, developed over a 3.3 Ga old Archean gneissic basement and are overlain by Paleoproterozoic Aravalli quartzite. The paleosol was developed between 2.5 and 2.1, coincident with the globally recognized Great Oxidation Event (GOE). In previous studies these paleosol sections were interpreted to have developed under reducing environment, however, the finding of a ‘ferricrete’ zone in the upper part of Tulsi Namla section (east of Udaipur) during the present study (in addition to earlier reported lithologies) has led to an alternative suggestion of oxygen-rich conditions during paleosol development. The Tulsi Namla paleosol section shows all the features characteristic of a complete paleosol section described from other Archean cratons. The paleosol includes sericite schist with kyanite as the prevalent Al-silicate in the lower part of profile while chloritoid and Fe-oxides typify the Fe-rich upper part. Alumina has remained immobile during the weathering process while Fe and Mn show a decrease in the lower part of the section and an abrupt rise in the upper part, in the ferricrete zone. The field and geochemical data indicate that the Tulsi Namla section is an in situ weathering profile and at least the upper part shows evidence of oxidizing conditions.     

Disturbances produced by variable body forces in a layer of finite thickness resting on a rigid foundation

Summary The disturbances produced by time-dependent torsional body forces in a layer of elastic material lying on a rigid foundation have been discussed in this paper. Solutions have been obtained first for a general type of body force, and the solutions for an impulsive cylindrical source and an impulsive torsional line source of finite length have been deduced. It has been found that for any point in the layer, there is no disturbance up to a certain instant, after which there is a sudden displacement, which gradually falls off and tends to zero as the timet increases.     

Free vibration of semisubmersibles: A parametric study

Like any other engineering structure, the dynamic aspects of semisubmersible offshore platforms require serious consideration. The free vibrations of the semisubmersible structures have been investigated in the present work, in which the effect of the variation of the length, draft and hull spacings on the natural frequencies and mode shapes has been studied and the nature of the variations and their reasons have been discussed.     

Response of rectangular plates with edges possessing different degrees of elastic rotational restraints, in harmonic excitation

The response of thin elastic plates having edges elastically restrained in rotation to different degrees and subjected to sinusoidal excitation has been investigated. The displacement and bending moment amplitudes have been determined for plates having different aspect ratios, rotational restraints at supports and frequency values. Comparison with available results indicated good accuracy. The formulation is based on a simple numerical procedure.     

Cordierite-garnet-sillimanite-quartz equilibrium: I. New experimental calibration in the system FeO−Al2O3−SiO2−H2O and certain P-T-X H2O relations

The equilibrium in which hydrous Fe-cordierite breaks down to almandine, sillimanite, quartz, and water was previously experimentally determined by Richardson (1968) and Holdaway and Lee (1977) using QMF buffer and by Weisbrod (1973) using QIF buffer. All these studies yielded similar results — a negative dP/dT slope for the equilibrium curve. However, based on theoretical arguments, Martignole and Sisi (1981), and based on Fe-Mg partitioning experiments on coexisting cordierite and garnet in equilibrium with sillimanite and quartz, Aranovich and Podlesskii (1983) suggested that this equilibrium curve has a positive dP/dT slope and its position depends on the water content of the equilibrium cordierite. We have redetermined this equilibrium using a much improved tecnique of detecting reaction direction, and cordierite starting material that contained virtually no hercynite. Hercynite was present as a contaminant in the cordierites of previous experimental studies and possibly reacted with quartz during the experimental runs to expand the apparent stability field of Fe-cordierite. We synthesized Fe-cordierite from reagent grade oxides at 710°C and 2 kbar (using QMF buffer) with two intermediate stages of grinding and mixing. The cordierite has a unit cell volume of 1574.60 ų (molar volume=23.706 J/bar) and no Fe³⁺ as indicated by X-ray diffraction and room temperature Mössbauer studies respectively. Reaction direction was concluded by noting20% change of the ratios of intensities of two key X-ray diffraction peaks of cordierite and almandine. Our results show that the four-phase equilibrium curve passes through the points 2.1 kbar, 650°C and 2.5 kbar, 750°C. This disagrees with all previous experimental studies. H₂O in the Fe-cordierite, equilibrated at 2.2 kbar and 700°C and determined by H-extraction line in the stable isotope laboratory, is 1.13 wt% (n=0.41 moles). H₂O content of pure Mg-cordierite equilibrated under identical conditions and determined by thermogravimentric conditions and determined by thermogravimetric analysis is 1.22 wt% (n=0.40). Similar determinations on Fe-cordierite and Mg-cordierite equilibrated at 2.0 kbar and 650°C show 1.27 wt% (n=0.46) and 1.47 wt% (n=0.48) of H₂O respectively. Thus, H₂O content appears to be independent of Fe/Mg ratio in cordierite, a conclusion which supports previous experimental determinations. The experimentally determined equilibrium curve represents conditions of P_H2O=P_total. From this we calculated the anhydrous curve representing equilibrium under conditions of X _H2O ^V =0.0. A family of calculated equilibrium curves of constant n _H2O ^Cord cut the experimentally determined curve at a very small angle indicating a slight variation in n _H2O ^Cord in cordierite in equilibrium with almandine, sillimanite, and quartz under the conditions of constant X _H2O ^V . Ancther set of calculated equilibrium curves, each representing constant a _H2O ^V demonstrate that the slopes of the curves vary with X _H2O ^V , and are all positive in the full range of 0.0X _H2O ^V 1.0.     

3-D seismic structure of the source area of the 1993 Latur, India, earthquake and its implications for rupture nucleations

The Latur earthquake (M_w 6.1) of 29 September 1993 is a rare stable continental region (SCR) earthquake that occurred on a previously unknown blind fault. In this study, we determined detailed three-dimensional (3-D) P- and S-wave velocity (V_p, V_s) and Poisson's ratio (σ) structures by inverting the first P- and S-wave high-quality arrival time data from 142 aftershocks that were recorded by a network of temporary seismic stations. The source zone of the Latur earthquake shows strong lateral heterogeneities in V_p, V_s and σ structures, extending in a volume of about 90 × 90 × 15 km³. The mainshock occurred within, but near the boundary, of a low-V_p, high-V_s and low-σ zone. This suggests that the structural asperities at the mainshock hypocenter are associated with a partially fluid-saturated fractured rock in a previously unknown source zone with intersecting fault surfaces. This might have triggered the 1993 Latur mainshock and its aftershock sequence. Our results are in good agreement with other geophysical studies that suggest high conductivity and high concentration of radiogenic helium gas beneath the source zone of the Latur earthquake. Our study provides an additional evidence for the presence of fluid related anomaly at the hidden source zone of the Latur earthquake in the SCR and helps us understand the genesis of damaging earthquakes in the SCR of the world.     

Facies Clustering in Turbidite Successions: Case Study from Andaman Flysch Group, Andaman Islands, India

Bed thickness data of two turbidite sections viz., Corbyn's Cove section, South Andaman and Kalipur section, North Andaman those belong to Oligocene Andaman Flysch Group, a forearc submarine fan system, were assessed for facies clustering employing Hurst statistics. Both the sections show Hurst phenomenon and reveal clustering in terms of thick and thin beds. Forcing behind event (bed) depositions in either of the studied sections was assessed statistically and inferred to be non-random and with cyclicities of irregular physical length. The inferred paleogeography through Hurst criteria though worked well for distal fan setting i.e., basin floor sheet sandstones of Corbyn's Cove section, its unequivocal application in proximal fan deposits remains to be tested. The mismatch in paleogeographic interpretation between Hurst test result (lobe-interlobe) and field observation (channel-levee) for the inner fan deposit is explained through differential facies stacking between fans grow in sea-level lowstand and highstand. Lower bed amalgamation, poor sand to mud ratio and subordinately present thick event deposits may be the result of active growth of Andaman Flysch fan in sea level highstand and expressed in lower Hurst K value for inner fan channel-levee association (Kalipur section) compared to many of the channel-levee deposits of lowstand fan systems observed world over.     

Application of visual,statistical and artificial neural network methods in the differentiation of water from the exploited aquifers in Kuwait

The ability of artificial neural network to differentiate water samples from the two aquifers of Kuwait on the basis of their major ion chemistry has been demonstrated. The major ion concentration distribution in the groundwater of the Kuwait Group and the Dammam Formation aquifers of Kuwait appears very similar. Cross-plots, supported by the discriminant function analysis of the data, however, suggest that there are some subtle differences in the overall composition of the water from the two aquifers that make it possible to differentiate the water from the two aquifers in almost 80% of the cases. An artificial neural network improved the differentiation capability to 90% of the cases. It is also possible to estimate the fraction of Kuwait Group water in the flow stream of dually completed wells with the help of an artificial neural network developed for this purpose. Electronic Publication