2007-2017年中国沙尘气溶胶的三维分布特征及输送过程

利用最新发布的CALIPSO产品，构建了2007-2017年中国沙尘气溶胶的三维分布，并结合HYSPLIT-4模式和再分析数据，探讨了沙尘的三维输送过程。结果表明：中国的沙尘排放源区主要是塔克拉玛干沙漠和巴丹吉林沙漠，沙尘气溶胶出现频率分别为60%和35%。塔克拉玛干沙漠排放的沙尘主要（50%~70%）停留在源地0~6 000 m高度，少部分向东输送至甘肃和内蒙古；巴丹吉林沙漠排放的沙尘则主要向东输送。中国沙尘排放量在春季最大，向东输送最强；夏季，东亚夏季风限制了沙尘向东输送；秋季，沙尘排放减弱，输送强度和夏季相当；沙尘排放量在冬季最小，输送最弱。夏季，沙尘在输送过程中可被抬升至高度5 000 m以上，春季次之，秋、冬季的沙尘主要在低层大气输送。沙尘在向东输送的过程中被抬升并和当地人为污染物混合变为污染性沙尘，华北地区污染性沙尘出现频率高达30%；输送到海洋的沙尘也会与洋面上（0~3 000 m高度）的海盐气溶胶混合，出现频率约为10%。     

广州城市流浪乞讨者的空间管治与日常生活实践

以广州流浪乞讨者为研究对象,通过深度访谈等质性研究方法,解读针对流浪乞讨者的空间管治政策与手段,分析流浪乞讨者的日常生活实践与生境协商。研究发现：在地方城市政策对流动性与公共秩序限制的双重压力下,在流浪乞讨者的日常生活实践中,不仅有针对管治行动者而刻意为之的特殊营建,亦有基于程式化生活流程对自我身份认同的重塑与真情实感的展演。地方政府基于空间目标的救助与真实存在的日常生活实践存在着一种张力。研究关注了城市边缘群体日常生活对地理意义的主动塑造过程,对全面理解并规范管理中国城市流浪乞讨现象具有借鉴意义。     

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

Directional interpolation infinite element for dynamic problems in saturated porous media

In this study, a directional interpolation infinite element suited to a saturated porous medium is presented to account for dynamic problems with semi-infi     

徐闻南山镇红树林沉积物及红树植物中重金属的累积特征与迁移规律

为探究重金属在红树林沉积物及红树植物中的分布累积及迁移规律，选取了徐闻南山镇红树林为研究对象，通过测定红树林沉积物及红树植物不同部位（根、茎、叶）的重金属质量分数，运用富集因子、生物富集系数、转移系数及相关性分析等方法进行分析。结果表明：1）红树林沉积物重金属质量分数表现为铬（Cr）＞锌（Zn）＞镍（Ni）＞铜（Cu）＞铅（Pb）＞砷（As）＞汞（Hg）＞镉（Cd），为中等变异程度；除了镍（Ni）元素外，其余7种重金属未超过国家一级标准，除了铅（Pb）元素外，其余7种重金属均超过广东省土壤环境背景值，说明研究区沉积物中重金属具有一定的积累效应。2）沉积物中砷（As）、铜（Cu）、锌（Zn）、汞（Hg）、镍（Ni）、铬（Cr）富集因子值均＞1.5，说明受到轻微人为活动影响；各站位镍（Ni）富集因子值均＞5，结合研究区背景，反映了镍（Ni）受到自然和人为输入的共同影响。3）白骨壤体内重金属主要集中在根部，而红海榄体内重金属在根茎叶中分布相对均匀。白骨壤根茎叶部位的大多数重金属质量分数远高于红海榄，说明白骨壤对重金属的吸附能力比红海榄强。汞（Hg）集中分布在植物的叶片部位，且与其他重金属之间相关性不明显；推测汞（Hg）主要通过叶片吸收进入植物体内，与交通运输污染有关。4）不同红树植物对不同重金属富集能力各异，白骨壤对重金属的富集能力表现为：镉（Cd）＞砷（As）＞铜（Cu）＞锌（Zn）＞汞（Hg）＞铅（Pb）＞镍（Ni）＞铬（Cr），红海榄表现为：镉（Cd）＞铜（Cu）＞汞（Hg）＞锌（Zn）＞铅（Pb）＞砷（As）＞镍（Ni）＞铬（Cr）。白骨壤和红海榄对汞（Hg）的运移能力都较强；红海榄对镉（Cd）的富集能力和转运能力都较强，而白骨壤对镉（Cd）富集能力较强，转运能力却较弱，这说明红树植物对重金属元素的富集能力与转运能力不存在正比关系。     

海洋卫星军民融合发展现状及几点思考

对比分析了国内外海洋卫星军民融合发展现状,指出了我国存在的主要差距,并分析造成这些差距和障碍的主要问题和症结所在,从标准体系融合、技术融合和数据融合三个方面提出我国海洋卫星军民融合发展思路,并结合发展思路提出了科学统筹、科技引领、开放协作、以人为本的军民融合发展举措,为海洋卫星军民融合发展提供了借鉴作用和决策支持。     

南极中山站全天信息采集系统

南极高原拥有独特的天文观测优势,为了对南极中山站夜天文观测条件进行实测研究,中国科学院云南天文台专门研制了一套具有耐低温、自动除雪除霜等适应南极气候特征的全自动全天信息采集系统,该系统可以提供实时的全天云量、天光背景和全天图像,并将信息推送到网页实时显示。介绍了系统的研制及为适应南极气候进行的耐低温实验,统计分析了中山站2016~2017年的全天信息数据,结果显示,中山站2016和2017年的可观测时间为772.21 h和437.38 h,可观测夜数为93 d和51 d,天光背景最大真实值为22.05 Mag/arcsec 2,年平均气温为-10.6℃,最高气温19.1℃,最低气温为-44℃,2016年平均相对湿度为55.2%。     

Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.     

Numerical Simulation of the Vortex-Induced Vibration of A Curved Flexible Riser in Shear Flow

A series of fully three-dimensional(3 D) numerical simulations of flow past a free-to-oscillate curved flexible riser in shear flow were conducted at Reynolds number of 185–1015. The numerical results obtained by the two-way fluid–structure interaction(FSI) simulations are in good agreement with the experimental results reported in the earlier study. It is further found that the frequency transition is out of phase not only in the inline(IL) and crossflow(CF) directions but also along the span direction. The mode competition leads to the non-zero nodes of the rootmean-square(RMS) amplitude and the relatively chaotic trajectories. The fluid–structure interaction is to some extent reflected by the transverse velocity of the ambient fluid, which reaches the maximum value when the riser reaches the equilibrium position. Moreover, the local maximum transverse velocities occur at the peak CF amplitudes, and the values are relatively large when the vibration is in the resonance regions. The 3 D vortex columns are shed nearly parallel to the axis of the curved flexible riser. As the local Reynolds number increases from 0 at the bottom of the riser to the maximum value at the top, the wake undergoes a transition from a two-dimensional structure to a 3 D one. More irregular small-scale vortices appeared at the wake region of the riser, undergoing large amplitude responses.     

Effects of stocking density on the growth and immunity of Atlantic salmon salmo salar reared in recirculating aquaculture system (RAS)

Atlantic salmon reared in recirculating aquaculture system (RAS) may lead to inappropriately high stocking density, because fish live in a limited space. Finding the suitable stocking density of Atlantic salmon reared in RAS is very important for RAS industry. In this paper, the influence of stocking density on growth and some stress related physiological factors were investigated to evaluate the effects of stocking density. The fish were reared for 220 days at five densities (A: 24 kg/m³; B: 21 kg/m³; C: 15 kg/m³; D: 9 kg/ m³ and E: 6 kg/m³ ). The results show that 30 kg/m³ might be the maximum density which RAS can afford in China. The stocking densities under 30 kg/m³ have no effect on mortality of Atlantic salmon reared in RAS. However, the specific growth rate (SGR), final weight and weight gain in the high density group were significantly lower than the lower density groups and middle density groups. Moreover, feed conversion rate (FCR) had a negative correlation with density. Plasma hormone T₃ and GH showed significant decrease with the increase of the stocking density of the experiment. Furthermore, thyroid hormone (T₃), GH (growth hormone) activities were decreased with stocking density increase. However, plasma cortisol, GOT (glutamic oxalacetic transaminase) and GPT (glutamic pyruvic transaminase) activities were increase with stocking density increase. And the stocking density has no effects on plasma lysozyme of Atlantic salmon reared in RAS. These investigations would also help devise efficient ways to rear adult Atlantic salmon in China and may, in a way, help spread salmon mariculture in China.