The initial cooling of pahoehoe flow lobes

 In this paper we describe a new thermal model for the initial cooling of pahoehoe lava flows. The accurate modeling of this initial cooling is important for understanding the formation of the distinctive surface textures on pahoehoe lava flows as well as being the first step in modeling such key pahoehoe emplacement processes as lava flow inflation and lava tube formation. This model is constructed from the physical phenomena observed to control the initial cooling of pahoehoe flows and is not an empirical fit to field data. We find that the only significant processes are (a) heat loss by thermal radiation, (b) heat loss by atmospheric convection, (c) heat transport within the flow by conduction with temperature and porosity-dependent thermal properties, and (d) the release of latent heat during crystallization. The numerical model is better able to reproduce field measurements made in Hawai'i between 1989 and 1993 than other published thermal models. By adjusting one parameter at a time, the effect of each of the input parameters on the cooling rate was determined. We show that: (a) the surfaces of porous flows cool more quickly than the surfaces of dense flows, (b) the surface cooling is very sensitive to the efficiency of atmospheric convective cooling, and (c) changes in the glass forming tendency of the lava may have observable petrographic and thermal signatures. These model results provide a quantitative explanation for the recently observed relationship between the surface cooling rate of pahoehoe lobes and the porosity of those lobes (Jones 1992, 1993). The predicted sensitivity of cooling to atmospheric convection suggests a simple field experiment for verification, and the model provides a tool to begin studies of the dynamic crystallization of real lavas. Future versions of the model can also be made applicable to extraterrestrial, submarine, silicic, and pyroclastic flows. Received: 26 November 1994 / Accepted: 1 December 1995     

Baryt-Kristalle aus Tarna Mare (Rumänien)

Zusammenfassung Auf der Basis von 32 vermessenen Kristallen wird die Morphologie der Baryte von Tarna Mare (Rumänien) diskutiert. Die Kristalle sind alle nach derb-Achse gestreckt. In der Systematik nachBraun liegt ihr Habitus zwischen Typ III (Erztyp) und Typ IV (Karbonattyp).

---

Barite crystals from Tarna Mare (Rumania)

Summary On the basis of 32 measured crystals the morphology of the barite from Tarna Mare (Rumania) is discussed. All the crystals are elongated parallel to theb-axis. In the systematics ofBraun, their habitus is intermediate between type III (ore type) and type IV (carbonate type).

---

---

Mit 1 Abbildung     

The Zamama-Thor region of Io: Insights from a synthesis of mapping, topography, and Galileo spacecraft data

We have studied data from the Galileo spacecraft's three remote sensing instruments (Solid-State Imager (SSI), Near-Infrared Mapping Spectrometer (NIMS), and Photopolarimeter-Radiometer (PPR)) covering the Zamama-Thor region of Io's antijovian hemisphere, and produced a geomorphological map of this region. This is the third of three regional maps we are producing from the Galileo spacecraft data. Our goal is to assess the variety of volcanic and tectonic materials and their interrelationships on Io using planetary mapping techniques, supplemented with all available Galileo remote sensing data. Based on the Galileo data analysis and our mapping, we have determined that the most recent geologic activity in the Zamama-Thor region has been dominated by two sites of large-scale volcanic surface changes. The Zamama Eruptive Center is a site of both explosive and effusive eruptions, which emanate from two relatively steep edifices (Zamama Tholi A and B) that appear to be built by both silicate and sulfur volcanism. A ∼100-km long flow field formed sometime after the 1979 Voyager flybys, which appears to be a site of promethean-style compound flows, flow-front SO₂ plumes, and adjacent sulfur flows. Larger, possibly stealthy, plumes have on at least one occasion during the Galileo mission tapped a source that probably includes S and/or Cl to produce a red pyroclastic deposit from the same vent from which silicate lavas were erupted. The Thor Eruptive Center, which may have been active prior to Voyager, became active again during the Galileo mission between May and August 2001. A pillanian-style eruption at Thor included the tallest plume observed to date on Io (at least 500 km high) and new dark lava flows. The plume produced a central dark pyroclastic deposit (probably silicate-rich) and an outlying white diffuse ring that is SO₂-rich. Mapping shows that several of the new dark lava flows around the plume vent have reoccupied sites of earlier flows. Unlike most of the other pillanian eruptions observed during the Galileo mission, the 2001 Thor eruption did not produce a large red ring deposit, indicating a relative lack of S and/or Cl gases interacting with the magma during that eruption. Between these two eruptive centers are two paterae, Thomagata and Reshef. Thomagata Patera is located on a large shield-like mesa and shows no signs of activity. In contrast, Reshef Patera is located on a large, irregular mesa that is apparently undergoing degradation through erosion (perhaps from SO₂-sapping or chemical decomposition of sulfur-rich material) from multiple secondary volcanic centers.     

Investigation of the hydrogeochemistry of some bottled mineral waters in Hungary

Bottled drinking water constitutes a significant part of total water consumption in developed countries and national and EU legislation regulates their market production. In the framework of an international project carried out by the EuroGeoSurveys Geochemistry Expert Group 36 bottled waters were obtained from public markets in Hungary in order to determine their hydrogeochemical composition. The objective of this study is to investigate the possible relationship between groundwater aquifer lithology and the processed and marketed bottled waters, and to develop a classification of bottled waters, based on their dissolved mineral content. Analytical results of this study are compared with the composition shown on bottle labels, and with archive hydrochemical data from the producing wells. Results show that, while processing of original groundwater, such as oxygen addition, iron or hydrogen-sulphide removal can significantly alter water composition, bottled water composition can be used for selection of sites for detailed hydrogeochemical and hydrogeological characterization. A simple and useful classification of bottled water quality is also presented that is based on natural groups of sampled waters derived by means of statistical data analysis methods.     

Color imaging of Mars by the High Resolution Imaging Science Experiment (HiRISE)

HiRISE has been producing a large number of scientifically useful color products of Mars and other planetary objects. The three broad spectral bands, coupled with the highly sensitive 14 bit detectors and time delay integration, enable detection of subtle color differences. The very high spatial resolution of HiRISE can augment the mineralogic interpretations based on multispectral (THEMIS) and hyperspectral datasets (TES, OMEGA and CRISM) and thereby enable detailed geologic and stratigraphic interpretations at meter scales. In addition to providing some examples of color images and their interpretation, we describe the processing techniques used to produce them and note some of the minor artifacts in the output. We also provide an example of how HiRISE color products can be effectively used to expand mineral and lithologic mapping provided by CRISM data products that are backed by other spectral datasets. The utility of high quality color data for understanding geologic processes on Mars has been one of the major successes of HiRISE.     

The thickest and the most complete loess sequence in the Carpathian basin: the borehole Udvari-2A

The key geological borehole Udvari-2A is located in Hungary at the Tolna Hegyhat Hills, in the central part of the Carpathian basin. Its detailed interpretation yielded valuable information on the stratigraphy and the post-Pannonian continental sedimentation regime of this territory. Stratigraphic data provided by the borehole facilitated the drawing up of a more precise picture on the post-Pannonian paleoenvironment and history of the evolution of the area. The borehole cut a thick series of the post-Pannonian Tengelic formation and the overlying, presumably complete sequence of the continental loess sediments of this region. The magnetostratigraphic correlation indicates that the 97 m thick loess sequence in the borehole Udvari-2A is the thickest and most complete so far recorded in Hungary and the deposition of loess started approximately at 1.1 Ma. In this sequence each of the four separable sedimentary periods of the loess are represented by distinct sediments. A theoretical stratigraphic column is also outlined to describe the Paks Loess Formation using data from the SE Transdanubia, defining and characterizing its lithological units. Since the formation is widely known, it was possible to correlate the most complete loess sequence in the Carpathian basin with the Marine Isotope Stages, and this opens up new opportunities for global correlation.     

Calculation of lava effusion rates from Landsat TM data

 We present a thermal model to calculate the total thermal flux for lava flowing in tubes, on the surface, or under shallow water. Once defined, we use the total thermal flux to estimate effusion rates for active flows at Kilauea, Hawaii, on two dates. Input parameters were derived from Landsat Thematic Mapper (TM), field and laboratory measurements. Using these parameters we obtain effusion rates of 1.76±0.57 and 0.78±0.27 m³ s^–1 on 23 July and 11 October 1991, respectively. These rates are corroborated by field measurements of 1.36±0.14 and 0.89±0.09 m³s^–1 for the same dates (Kauahikaua et al. 1996). Using weather satellite (AVHRR) data of lower spatial resolution, we obtain similar effusion rates for an additional 26 dates between the two TM-derived measurements. We assume that, although total effusion rates at the source declined over the period, the shut down of the ocean entry meant that effusion rates for the surface flows alone remained stable. Such synergetic use of remotely sensed data provides measurements that can (a) contribute to monitoring flow-field evolution, and (b) provide reliable numerical data for input into rheological and thermal models. We look forward to being able to produce estimates for effusion rates using data from high-spatial-resolution sensors in the earth observing system (EOS) era, such as Landsat 7, the hyperspectral imager, the advanced spaceborne thermal emission spectrometer, and the advanced land imager. Received: 25 July 1997 / Accepted: 26 February 1998     

Mapping of the Culann-Tohil region of Io from Galileo imaging data

We have used Galileo spacecraft data to produce a geomorphologic map of the Culann-Tohil region of Io's antijovian hemisphere. This region includes a newly discovered shield volcano, Ts?i Goab Tholus and a neighboring bright flow field, Ts?i Goab Fluctus, the active Culann Patera and the enigmatic Tohil Mons-Radegast Patera-Tohil Patera complex. Analysis of Voyager global color and Galileo Solid-State Imaging (SSI) high-resolution, regional (50-330 m/pixel), and global color (1.4 km/pixel) images, along with available Galileo Near-Infrared Mapping Spectrometer (NIMS) data, suggests that 16 distinct geologic units can be defined and characterized in this region, including 5 types of diffuse deposits. Ts?i Goab Fluctus is the center of a low-temperature hotspot detected by NIMS late during the Galileo mission, and could represent the best case for active effusive sulfur volcanism detected by Galileo. The Culann volcanic center has produced a range of explosive and effusive deposits, including an outer yellowish ring of enhanced sulfur dioxide (SO₂), an inner red ring of SO₂ with short-chain sulfur (S₃-S₄) contaminants, and two irregular green diffuse deposits (one in Tohil Patera) apparently produced by the interaction of dark, silicate lava flows with sulfurous contaminants ballistically-emplaced from Culann's eruption plume(s). Fresh and red-mantled dark lava flows west of the Culann vent can be contrasted with unusual red-brown flows east of the vent. These red-brown flows have a distinct color that is suggestive of a compositional difference, although whether this is due to surface alteration or distinct lava compositions cannot be determined. The main massif of Tohil Mons is covered with ridges and grooves, defining a unit of tectonically disrupted crustal materials. Tohil Mons also contains a younger unit of mottled crustal materials that were displaced by mass wasting processes. Neighboring Radegast Patera contains a NIMS hotspot and a young lava lake of dark silicate flows, whereas the southwest portion of Tohil Patera contains white flow-like units, perhaps consisting of ‘ponds’ of effusively emplaced SO₂. From 0°-15° S the hummocky bright plains unit away from volcanic centers contains scarps, grooves, pits, graben, and channel-like features, some of which have been modified by erosion. Although the most active volcanic centers appear to be found in structural lows (as indicated by mapping of scarps), DEMs derived from stereo images show that, with the exception of Tohil Mons, there is less than 1 km of relief in the Culann-Tohil region. There is no discernable correlation between centers of active volcanism and topography.