Long-term hydrology and aquatic biogeochemistry data from H. J. Andrews Experimental Forest,Cascade Mountains,Oregon

The H. J. Andrews Experimental Forest (HJA) encompasses the 6400 ha Lookout Creek watershed in western Oregon, USA. Hydrologic, chemistry and precipitation data have been collected, curated, and archived for up to 70 years. The HJA was established in 1948 to study the effects of harvest of old-growth conifer forest and logging-road construction on water quality, quantity and vegetation succession. Over time, research questions have expanded to include terrestrial and aquatic species, communities and ecosystem dynamics. There are nine small experimental watersheds and 10 gaging stations in the HJA, including both reference and experimentally treated watersheds. Gaged watershed areas range from 8.5 to 6242 ha. All gaging stations record stage height, water conductivity, water temperature and above-stream air temperature. At nine of the gage sites, flow-proportional water samples are collected and composited over 3-week intervals for chemical analysis. Analysis of stream and precipitation chemistry began in 1968. Analytes include dissolved and particulate species of nitrogen and phosphorus, dissolved organic carbon, pH, specific conductance, suspended sediment, alkalinity, and major cations and anions. Supporting climate measurements began in the 1950s in association with the first small watershed experiments. Over time, and following the initiation of the Long Term Ecological Research (LTER) grant in 1980, infrastructure expanded to include a set of benchmark and secondary meteorological stations located in clearings spanning the elevation range within the Lookout Creek watershed, as well as a large number of forest understory temperature stations. Extensive metadata on sensor configurations, changes in methods over time, sensor accuracy and precision, and data quality control flags are associated with the HJA data.     

Validation of the SCEC Broadband Platform simulations for tall building risk assessments considering spectral shape and duration of the ground motion

Earthquake simulation technologies are advancing to the stage of enabling realistic simulations of past earthquakes as well as characterizations of more extreme events, thus holding promise of yielding novel insights and data for earthquake engineering. With the goal of developing confidence in the engineering applications of simulated ground motions, this paper focuses on validation of simulations for response history analysis through comparative assessments of building performance obtained using sets of recorded and simulated motions. Simulated ground motions of past earthquakes, obtained through a larger validation study of the Southern California Earthquake Center Broadband Platform, are used for the case study. Two tall buildings, a 20‐story concrete frame and a 42‐story concrete core wall building, are analyzed under comparable sets of simulated and recorded motions at increasing levels of ground motion intensity, up to structural collapse, to check for statistically significant differences between the responses to simulated and recorded motions. Spectral shape and significant duration are explicitly considered when selecting ground motions. Considered demands include story drift ratios, floor accelerations, and collapse response. These comparisons not only yield similar results in most cases but also reveal instances where certain simulated ground motions can result in biased responses. The source of bias is traced to differences in correlations of spectral values in some of the stochastic ground motion simulations. When the differences in correlations are removed, simulated and recorded motions yield comparable results. This study highlights the utility of physics‐based simulations, and particularly the Southern California Earthquake Center Broadband Platform as a useful tool for engineering applications.     

Urban flood hazard mapping using a hydraulic–GIS combined model

Natural Hazards - Urban flooding is a reoccurring disaster, and its frequency and intensity are likely to increase in the future due to the increasing frequency of storm events. Up-to-date...     

Evaluation of the relative roles of global versus local sedimentary controls on Middle to Late Pleistocene formation of continental margin strata,Canterbury Basin,New Zealand

Determining the relative influence of eustasy versus local sedimentary processes on strata formation is a fundamental challenge in the study of continental margin stratigraphy. In this paper, the relative contribution of these factors on continental margin evolution during the Middle to Late Pleistocene is evaluated using samples from Integrated Ocean Drilling Program Expedition 317. Core‐logging, biostratigraphy and quantitative X‐ray diffraction mineralogy are used to delineate continental shelf sedimentary systems. Major lithological unconformities bound stratigraphic sequences that contain recurring compositional patterns and that resemble other examples of Middle to Upper Pleistocene sequences. However, a preliminary chronology suggests that sequence boundary formation cannot be linked ‘one to one’ with eustatic cycles and therefore these sequences can contain multiple ca 100 ka eustatic cycles. Smaller amplitude, higher frequency transitions in sediment composition are interpreted as stratigraphic sequences driven by more rapid perturbations in the interplay of accommodation and sediment supply; their stratigraphy is variable in time and across the shelf, suggesting a strong influence of local sedimentary forcing in their formation. Changes in sediment composition after the Middle Pleistocene Transition indicate that sediment transfer from onshore sources in the glaciated Southern Alps to the middle‐shelf occurred over a single 100 ka glacio‐eustatic cycle, with an additional 100 ka lag before the mineralogical signal was preserved on the outer‐shelf. This phenomenon is coincident with rapid shelf progradation in this basin, suggesting a causal relation between across‐shelf sediment transport and margin progradation. This is one of very few studies that provide insights at the core scale into the processes driving continental margin evolution during the Middle to Late Pleistocene. This work shows that compositional changes in mud‐dominated successions can lead to a sequence stratigraphic interpretation and the identification of high‐frequency sequences, which may not be possible using a conventional stratigraphic approach.     

Granitic magmatism,basement ages,and provenance indicators in the Malay Peninsula: Insights from detrital zircon U–Pb and Hf-isotope data

The Malay Peninsula lies on two continental blocks, Sibumasu and East Malaya, which are intruded by granitoids in two provinces: the Main Range and Eastern. Previous models propose that Permian–Triassic granitoids are subduction-related and syn-to post-collisional. We present 752 U–Pb analyses that were carried out on zircons from river sands in the Malay Peninsula; of these, 243 grains were selected for Hf-isotope analyses. Our data suggest a more complex Sibumasu–East Malaya collision history. ¹⁷⁶Hf/¹⁷⁷Hf_i ratios reveal that Permian–Triassic zircons were sourced from three magmatic suites: (a) Permian crustally-derived granitoids, (b) Early-Middle Triassic granitoids with mixed mantle–crust sources, and (c) Late Triassic crustally-derived granitoids. This suggests three Permian–Triassic episodes of magmatism in the Malay Peninsula, two of which occurred in the Eastern Province. Although the exact timing of the Sibumasu–East Malaya collision remains unresolved, current data suggest that it occurred before the Late Triassic, probably in Late Permian–Early Triassic. Our data also indicate that Sibumasu and East Malaya basements are chronologically heterogeneous, but predominantly of Proterozoic age. Some basement may be Neoarchaean but there is no evidence for basement older than 2.8 Ga. Finally, we show that Hf-isotope signatures of Triassic zircons can be used as provenance indicators.     

Development of tools to estimate conveyance losses in the Truckee River, USA

A method to estimate stream conveyance losses, including stream bank seepage and evapotranspiration from riparian areas, was developed for the Truckee River in California and Nevada (USA). Aquifer diffusivity is the primary variable required to compute aquifer head and seepage. Head and seepage conceptual models developed in previous studies were calibrated using stream stage and aquifer head at five sites along the Truckee River. The equations for head require numerical convolution to solve. It was found that head is insensitive to diffusivity and a single value for diffusivity provides good results at all study sites. Also, because releases from storage are usually prescribed as a step increase in flow for a given period of time followed by a step decrease in flow, an analytic solution for volume of seepage can be used in place of numerical convolution. Under typical operating conditions, seepage volume represents a small fraction of the total reservoir releases. Uncertainty in seepage estimates can be reduced with increased accuracy in hydraulic conductivity. This work demonstrates a valuable technique to estimate conveyance losses under natural and managed stream flow.     

Mineralogical and geochemical investigations of silicate-rich mine waste from a kyanite mine in central Virginia: implications for mine waste recycling

A kyanite mine in central Virginia produces a silicate-rich waste stream which accumulates at a rate of 450,000–600,000 tons per year. An estimated 27 million tons of this waste stream has accumulated over the past 60 years. Grain size distribution varies between 1.000 and 0.053 mm, and is commonly bimodal with modes typically being 0.425 and 0.250 mm and uniformity coefficients vary from 2.000 to 2.333. Hydraulic conductivity values vary from 0.017 to 0.047 cm/s. Mineralogy of the waste stream consists of quartz, muscovite, kyanite and hematite. Muscovite grains have distinct chemical compositions with significant Na₂O content (1.12–2.66 wt%), TiO₂ content (0.63–1.68 wt% TiO₂) and Fe content, expressed as Fe₂O₃ (up to 1.37 wt%). Major element compositions of samples were dominated by SiO₂ (87.894–90.997 wt%), Al₂O₃ (6.759–7.741 wt%), Fe₂O₃ (1.136–1.283 wt%), and K₂O (0.369–0.606 wt%) with other components being <1.000 wt%. Elements of environmental concern (V, Cr, Ni, Cu, Zn, As, Ag, Sn, Sb, Ba, Hg, Tl, and Pb) were detected; however, the concentrations of all elements except Ni were below that of the kyanite quartzites in the region from which the waste is derived. Both major and trace element compositions indicate minimal variation in composition. The waste stream has potential for recycling. Muscovite is suitable for recycling as a paint pigment or other industrial applications. Muscovite and hematite are commonly intergrown and are interpreted to be material where much of the elements of environmental concern are concentrated. Reprocessing of the waste stream to separate muscovite from other components may enable the waste stream to be used as constructed wetland media for Virginia and nearby states. Recycling of this mine waste may have a positive impact on the local economy of Buckingham County and aid in mitigation of wetland loss.     

Using existing scientific capacity to set targets for ecosystem-based management: A Puget Sound case study

Human actions have altered the structure and function of coastal ecosystems worldwide. In many locations, the overall portfolio of goods, cultural amenities, and supporting services provided by the marine environment has deteriorated. Ecosystem-based management (EBM) offers significant promise for addressing these issues because it is a comprehensive and integrated approach designed to reconcile conflicts and trade-offs among users of marine resources. A key step in the implementation of EBM is the establishment of target reference levels, or desired states, for indicators that reflect the status of the ecosystem. This paper reviews five approaches, borrowed from a variety of disciplines, to establish target reference levels for EBM. The approaches include the use of existing reference levels, reference directions, and reference levels based on nonlinear functional relationships, baselines, or social norms. Each approach is particularly suitable for EBM because it can be used alone or in combination with others to contextualize status for a diverse suite of ecosystem goals influenced by a wide variety of human activities. Perhaps most importantly, these approaches offer a prospectus for moving forward with EBM by using readily available information, motivating existing scientific capacity, and addressing trade-offs implicit to the setting of targets. This last point is articulated via examples of how each type of reference level might be applied in Puget Sound, WA, USA, where the efforts of scientists, managers, and policy makers have aligned recently in the interest of EBM implementation.     

Grazing suppression of dimethylsulphoniopropionate (DMSP) accumulation in iron-fertilised, sub-Antarctic waters

The impact of in situ iron fertilisation on the production of particulate dimethylsulphoniopropionate (DMSPp) and its breakdown product dimethyl sulphide (DMS) was monitored during the SOLAS air-sea gas exchange experiment (SAGE). The experiment was conducted in the high nitrate, low chlorophyll (HNLC) waters of the sub-Antarctic Southern Ocean (46.7°S 172.5°E) to the south-east of New Zealand, during March-April, 2004. In addition to monitoring net changes in the standing stocks of DMSPp and DMS, a series of dilution experiments were used to determine the DMSPp production and consumption rates in relation to increased iron availability. In contrast to previous experiments in the Southern Ocean, DMS concentrations decreased over the course of the 15-d iron-fertilisation experiment, from an integrated volume-specific concentration in the mixed layer on day 0 of 0.78 nM (measured values 0.65-0.91 nM) to 0.46 nM (measured values 0.42-0.47 nM) by day 15, in parallel with the surrounding waters. DMSPp, chlorophyll a and the abundance of photosynthetic picoeukaryotes exhibited indiscernible or only moderate increases in response to the raised iron availability, despite an obvious physiological response by the phytoplankton. High specific growth rates of DMSPp, equivalent to 0.8-1.2 doublings d⁻¹, occurred at the simulated 60% light level of the dilution experiments. Despite the high production rates, DMSPp accumulation was suppressed in part by microzooplankton grazers who consumed between 61% d⁻¹ and 126% d⁻¹ of the DMSPp production. Temporal trends in the rates of production and consumption illustrated a close coupling between the DMSP-producing phytoplankton and their microzooplankton grazers. Similar grazing and production rates were observed for the eukaryotic picophytoplankton that dominated the phytoplankton biomass, partial evidence that picoeukaryotes contributed a substantial proportion of the DMSP synthesis. These rates for DMSPp and picoeukaryotes were considerably higher than for chlorophyll a, indicating higher cycling rates of the DMSP-producing taxa than for the bulk phytoplankton community. When compared to the total phytoplankton community, there was no evidence of selection against the DMSP-containing phytoplankton by the microzooplankton grazers; the opposite appeared to be the case. SAGE demonstrated that increased iron availability in the HNLC waters of the Southern Ocean does not invariably lead to enhanced DMS sea-air flux. The potential suppression of DMSPp accumulation by grazers needs to be taken into account in future attempts to elevate DMS emission through in situ iron fertilisation and in understanding the hypothesised link between levels of Aeolian iron deposition in the Southern Ocean, DMS emission and global albedo.     

Exploring the ‘ethical everyday’: An ethnography of the ethics of family consumption

Using ethnographic research with six families in the North West of England (2007–2009), this paper opens up the ‘black box’ of everyday ethical consumption by adding colour and form to these everyday experiences. While recent geographical literature has recognised the ethical considerations that are implicit in everyday consumption practices, there is a noticeable void of research that explores and fleshes out the everyday ethical actions of individuals and families as consumers. By exploring the everyday ethics of money, waste and health choices in family consumption practices, this paper makes the case for recognising the ethical nature of everyday practices and choices of consumption. It is argued that rather than consumers subscribing to a given set of ethics in consumption, there are multiple ways of recognising consumption as an ethically-embedded process.