Calibration and Instrumental Errors in Early Measurements of Air Temperature

Calibration and instrumental errors of early thermometers are analysed. The first concepts, the development of scientific ideas, the main problems linked to the construction of early thermometers and the calibration are considered in order to evaluate errors. The operating principle of the `constant-volume' air thermometer is presented andits limits are discussed. The theory shows that for an ideal Amontons' thermometer, only one calibration point is sufficient from which the other can be calculated; it is therefore possible to determine the difference from an ideal instrument. A comparison is made between calibrations and instruments made by G. Amontons (1699), G. Poleni (Venice, 1709; Padova 1725), and J.H. Lambert (1779). Amontons' thermometer needs to be integrated with a barometric reading; an important error arises from the different density of mercury during calibration and usage. The calibration was made in winter and at the upper point the thermometer was at 100 ° C, while the barometer remained near 0 ° C. However, field observations were made with both instruments at the same temperature and this caused an error that in the cold season is negligible, but in the hot season reaches 1 ° C. Problems connected with the calibration and scale linearity are discussed in view of the beliefs of the time and the operative methodologies used in early meteorology. Emphasis is given to comparability of different instruments, thermometric scales and calibration methodologies used in Padova in the 18th century for Amontons' Poleni's, Fahrenheit's, Réaumur's and Delisle's thermometers. The instrument supports and the incision of the scale were subject to expand or contract depending on temperature or humidity changes, and this was a source of error that can be corrected with the help of observed or estimated data. Problems linked to the construction of thermometers have been evaluated, as well as the linearity of displacements of the thermometric liquid, or the drift due to ageing and transformation of the thermometric liquid, the glass or the support. All these errors have been evaluated and some of them have been found negligible, but some are of the order of 0.5 ° C. The quantitative resultsobtained here can also be usefully applied to correct and validate other long series.     

Is there any detachment in the Lower Dolpo (western Nepal)?Y a-t-il un détachement dans le bas Dolpo (Népal occidental) ?

A structural transect in the Lower Dolpo highlights that the deformation and metamorphism of the Tibetan Zone (TZ) increase toward the bottom of the sequence. The contact with the underlying HHC is marked by a metamorphic jump from amphibolite facies in the carbonatic rocks of the upper part of the HHC to greenschist facies marbles in the TZ. Moreover, the HHC and the TZ show different metamorphic histories. The contact zone shows a strain increase accompanied by asymmetric folds with a top-to-the-northeast vergence, connected to a down-to-the-northeast tectonic transport. The contact is interpreted as an extensional shear zone, connected to the South Tibetan Detachment System. To cite this article: R. Carosi et al., C. R. Geoscience 334 (2002) 933–940.     

Seismic risk assessments and GIS technology: applications to infrastructures in the Friuli–Venezia Giulia region (NE Italy)

This paper illustrates the seismic risk preliminary estimates of two different groups of structures located on the territory of the Friuli–Venezia Giulia region (NE Italy) : the first group includes some special industrial plants, and the second group includes bridges and tunnels belonging to the regional highway network. The part of the study on special industrial plants tries to evaluate the degree of expected damage, taking into account their structural typology and ground shaking expressed in terms of macroseismic intensity. The second part of the study is an application of the HAZUS methodology to the tunnels and bridges of a highway network: the combination of expected ground shaking and the construction characteristics lead to very different risk levels, especially when considering the bridges. The resulting damage levels to bridges and tunnels are still only indicative because of the fragility curves used in the evaluations: they were developed for existing bridge and tunnel structural typologies in the U.S.A. Moreover, both examples show the power of GIS technology in storing, elaborating, and mapping spatial data. Copyright © 2003 John Wiley & Sons, Ltd.     

Quantitative Evaluation of Water Deposited By Dew on Monuments

Samples of White and Green Carrara marble, and three types oflimestone and brick exposed in the field vertically and horizontally were used to evaluate condensationon monuments during clear sky nights. Experiments in a simulation chamber under controlledconditions led to a general equation for the actual amount of water deposited on a surface by dew.This is determined by: How much and for how long the surface temperature falls below the dew point,the moisture content in the air and the ventilation. On clear nights, the condensation on buildingstructures facing the sky may reach some 0.2 kg m^-2 (or 0.2 mm), whereas condensation on verticalsurfaces is very small. Computation of the seasonal trend of night-time condensationshowed that the maximum amount of water condensed per night occurs in the autumn, with the moreabundant concentration of moisture in the air. The total amount of water condensed per month isfound to be a maximum in the summer-autumn period. Morning condensationfor the thermal inertia of monuments is also relevant, and has been calculated to reach the same order of magnitude as thenocturnal dew. A detailed analysis of the temperature and mixing ratio profiles near a condensingsurface has shown two different situations. In still air, the two profiles follow an exponentiallaw and the thermal and the concentration layers lie within a few tens of millimetres. Inthe presence of turbulence, the thickness of these two layers is dramatically reduced. In still air, infront of a vertical, chilly surface, the deposition rate of air pollutants by thermophoresis and/orStefan flow is increased by 3 or 4 times in comparison with a horizontal surface. In the presence ofturbulence, the thickness of the thermal and concentration layers was dramatically reduced, makingthese two kinds of deposition much faster.     

Seismic hazard assessment in the Ionian Islands based on observed macroseismic intensities

Catalogues of actual observed intensities are constructed for three towns in the Ionian Islands. They are used for seismic hazard assessment and the results are compared with those obtained by standard approaches; that is, by statistics applied to the data computed from epicentral parameters. The results show that seismic hazard is better assessed using observed rather than computed data, but preparation of the local catalogue presents non-trivial difficulties.     

Use of targets to track 3D displacements in highly vegetated areas affected by landslides

Monitoring landslides with terrestrial laser scanning (TLS) is currently a well-known technique. One problem often encountered is the vegetation that produces shadow areas on the scans. Indeed, the points behind a given obstacle are hidden and thus occluded on the point cloud. Thereby, locations monitored with terrestrial laser scanner are mostly rock instabilities and few vegetated landslides, being difficult or even impossible to survey vegetated slopes using this method with its classical non-full wave form. The Peney landslide (Geneva, Switzerland) is partially vegetated by bushes and trees, and in order to monitor its displacements during the drawdown of the Verbois reservoir located at its base, an alternative solution has been found. We combined LiDAR technique with 14 targets made of polystyrene placed at different locations inside and outside the landslide area. The obtained displacements were compared with classical measurement methods (total station and extensometer), showing good resemblance of results, indicating that the use of targets in highly vegetated areas could be an efficient alternative for mass movements monitoring.     

The June 4th 1999 severe weather episode in San Quirino, Italy: a tornado event?

On the morning of June 4th 1999, a severe weather event took place in San Quirino, a small village of Friuli-Venezia Giulia in the northeast of Italy. This village is located near the piedmont of the Alps, 40 km west from Udine and 60 km north from Venice.Around 0900 UTC (1100 local time), a thunderstorm with an intense hail fall affected the area of San Quirino. A few minutes later (around 0920 UTC, source: a farmer), a funnel cloud from a cumulonimbus touched the ground, producing damages to houses, trees and sheds. The damaged area was quite narrow (about 300 m) and short (less than 10 km). No injuries to people were reported.In spite of the smallness of the area interested by the phenomenon, this storm is studied here starting from the synoptic scale, moving to the mesoscale and finishing with the storm scale, trying to underline its characteristics. These analyses, especially those coming from the Doppler radar images, bring us to the conclusion that the San Quirino episode was produced by a supercell storm.