Pre-collisional high pressure metamorphism and nappe tectonics at active continental margins: a numerical simulation

The evolution of a subduction channel and orogenic wedge is simulated in 2D for an active continental margin, with P-T paths being displayed for selected markers. In our simulation, subduction erosion affects the active margin and a structural pattern develops within a few tens of millions of years, with four zones from the trench into the forearc: (i) an accretionary complex of low grade metamorphic sedimentary material, (ii) a wedge of nappes with alternating upper and lower crustal provenance, and minor interleaving of oceanic or hydrated mantle material, (iii) a megascale melange composed of high pressure (HP) and ultra-high pressure (UHP) metamorphic rocks extruded from the subduction channel, and (iv) the upward tilted frontal part of the remaining lid. The P–T paths and time scales correspond to those typically recorded in orogenic belts. The simulation shows that HP/UHP metamorphism of continental crust does not necessarily indicate collision, but that the material can be derived from the active margin by subduction erosion and extruded from the subduction channel beneath the forearc during ongoing subduction.     

Offshore granulites from the Bay of Biscay margins: fission tracks constrain a Proterozoic to Tertiary thermal history

Zircon and apatite fission track ages were determined on granulites dredged along the Bay of Biscay margins. A sample from Ortegal Spur (Iberia margin) yielded 725 ± 67 Ma (zircon). A sample from Le Danois Bank (Iberia margin) yielded 284 ± 58 Ma (zircon), indicating post‐Variscan cooling. Apatite from this sample gave 52 ± 2 Ma, interpreted as final cooling after ‘Pyrenean’ thrust imbrication. Two other samples from Le Danois Bank have Early Cretaceous apatite ages (138 ± 7 and 120 ± 8 Ma), interpreted to result from exhumation during rifting. Finally, a granulite from Goban Spur (Armorican margin) gave 212 ± 10 Ma (apatite), coinciding with a precursory rifting phase. Together with published radiometric results, these data indicate a Precambrian high‐grade terrane at the site of the current margins. The distribution of the granulites on the seafloor reflects tectonic and erosional processes related to (a) Mesozoic rifting and (b) Early Tertiary incipient subduction of the Bay of Biscay beneath Iberia.     

The Market Gate of Miletus: damages, material characteristics and the development of a compatible mortar for restoration

The indoor exhibit of the Market Gate of Miletus is unique for an archaeological monument. The reconstruction of the gate was done in such a way that most marble fragments were removed leaving cored marble columns 3–4 cm in thickness. These cored columns were mounted on a steel construction and filled with different mortars or filled with specially shaped blocks of brick combined with mortar. All the missing marble elements were replaced by copies made of a Portland cement based concrete, which is compositionally similar to the original building materials. During the Second World War the monument was heavily damaged by aerial bombardment. For 2 years the Market Gate of Miletus was exposed to weathering, because a brick wall protecting the gate was also destroyed. The deterioration phenomena observed are microcracks, macroscopic fractures, flaking, sugaring, greying, salt efflorescence, calcitic-sinter layers and iron oxide formation etc. The rapid deterioration seems to be due to indoor atmospheric effects, and also by a combination of incompatible materials (e.g. marble, steel, mortar, concrete, bricks etc.). Compatible building materials like mortars or stone replacing materials have to be developed for the planned restoration. The requirements for restoration mortars are chemical-mineralogical and physical-mechanical compatibilities with the existing building materials. In detail this means that the mortar should ensure good bonding properties, adapted strength development and not stain the marble when in direct contact. The favoured mortar was developed with a hydraulic binder based on iron-free white cement and pozzolana based on activated clay. A special limestone and quartz sand mixture was used as an aggregate. The cement was adjusted using chemical additives. Specially designed tests were applied extensively to prove whether the developed mortar is suitable for the restoration of this precious monument.     

Zur Theorie einfacher und mehrfacher räumlicher Mittelbildungen

Zusammenfassung Die Arbeit stellt einen Beitrag zur Theorie der einfachen und mehrfachen räumlichen Mittelbildung einer Feldfunktion dar. Es werden Formeln für die verschiedenen Mittelbildungen angegeben. Ferner wird gezeigt, daß eine zweifache räumliche Mittelbildung durch eine einfache mit einer entsprechend anderen Gitterdistanz ersetzt werden kann. Weiter wird die Genauigkeit der Approximation des Differentialoperators der Mittelung durch einen Differenzenoperator an Hand von Rossby-Wellen diskutiert. Dabei wird nachgewiesen, daß nur, wenn die Gitterdistanz der räumlichen Mittelbildung gegenüber der Wellenlänge von Rossby-Wellen klein verbleibt, eine hinreichend genaue Näherung erzielt werden kann.

---

Summary The paper is a contribution to the theory of single and multiple space means of a field function. Formulae for the derivation of various types of means are given. It is shown that a double space mean can be replaced by a single one, provided an appropriate grid distance is used. For the case ofRossby waves, the degree of approximation of the mean attained by using an operator with finite increments and the accurate differential operator is discussed. Sufficient approximation can only be obtained when the grid distance is small compared to the length of theRossby waves.

---

Résumé Ce mémoire est une contribution à la théorie de l'établissement dans l'espace des moyennes simples et multiples d'une fonction de champ. On y indique des formules pour l'établissement des diverses moyennes. On montre ensuite qu'une moyenne spaciale double peut être remplacée par une moyenne simple par la seule modification de la distance séparant les mailles du réseau. On discute au moyen d'ondes deRossby la précision de l'approximation obtenue par les moyennes issues d'un opérateur différentiel et d'un opérateur de différences. On démontre ainsi que l'approximation ne peut être suffisante que si la grandeur des mailles du réseau servant à l'établissement des moyennes reste petite par rapport à la longueur des ondes deRossby.

---

---

Mit 4 Textabbildungen     

Kriterien für die anwendung des ertelschen erhaltungssatzes in ionisierten bzw. viskosen medien

Zusammenfassung Es wird gezeigt, dass für ein Gasgemisch, das geladene Komponenten enthält und von einem divergenzfreien und stationären Magnetfeld durchsetzt wird, für eine geladene Komponente (Ionen oder freie Elektronen) näherungsweise der Ertelsche Erhaltungssatz gilt, falls unter bestimmten Voraussetzungen das Verhältnis der Reibungskraft (innere) zur magnetischen Feldkraft sehr klein verbleibt. Weiter wurde nachgewiesen, dass derselbe Erhaltungssatz näherungsweise auch für ein viskoses Medium gilt, falls die Reynoldszahl (Verhältnis der Trägheitskraft zur Reibungskraft (innere)) sehr gross ist. Dies ist bei einem turbulenten Medium der Fall.

---

Summary It is shown that in a gas mixture containing charged constituents (ions and free electrons) the conservation theorem of Ertel is valid on certain conditions for one of the charged constituent if the ratio of the friction force between the neutral and charged constituents to the magnetic force is small. The same conservation theorem is also valid for a viscous fluid if the Reynoldsnumber (ratio of inertial force to the viscous force) is large.

     

A novel time-series station in the Wadden Sea (NW Germany): First results on continuous nutrient and methane measurements

In autumn 2002 a time-series station was installed in the tidal inlet between the Islands of Langeoog and Spiekeroog (Southern North Sea, NW Germany) to continuously measure physical, chemical, and meteorological parameters, even during extreme weather conditions (gale-force storms, drifting ice). Inside the pole of the station sensor tubes are installed in direction of the prevailing tidal currents. The tubes are equipped with hydrographic sensors (pressure, temperature, conductivity) and allow retrieval of water for nutrient analysis by automated instruments located inside the pole. Dissolved methane and the nutrients ammonia, nitrite, nitrate, phosphate, and silicate are measured at the station.     

Assessing potential abiotic and biotic complications of crayfish-induced gravel transport in experimental streams

Biogeomorphology adds the element “biological dynamics” (of populations or communities) to chemical and physical geomorphic factors and thus complicates the framework of geomorphic processes. Such biological complications of the animal-induced transport of solids in streams should be particularly important in crayfish, as crayfish affect this transport through their overall activity and intraspecific aggression levels, which could be modified by shelter availability or the establishment of dominance hierarchies among individuals not knowing each other. Using experimental streams, we tested these hypotheses by measuring how shelter availability or residential crayfish group invasion by unknown individuals affected the impact of the crayfish Orconectes limosus on the (i) transport of gravel at baseflow (during 12 experimental days); (ii) sediment surface characteristics (after 12 days); and (iii) critical shear stress causing incipient gravel motion during simulated floods (after 12 days). The two potentially important factors shelter availability or residential group invasion negligibly affected the crayfish impact on gravel sediments, suggesting that habitat unfamiliarity (a third potentially important factor affecting crayfish activity) should increase the crayfish-induced sediment transport. Because habitat unfamiliarity is associated with sporadic long-distance migrations of a few crayfish individuals, this third factor should play a minor role in real streams, where crayfish biomass should be a key factor in relations with crayfish effects on sediments. Therefore, we combined the results of this study with those of previous crayfish experiments to assess how crayfish biomass could serve in modelling the gravel transport. Crayfish biomass explained 47% of the variability in the baseflow gravel transport and, in combination with the coefficient of variation of the bed elevation and algal cover, 72% of the variability in the critical gravel shear stress. These results encourage more research on the topic, as an increasing number of eliminations of abiotic and biotic factors that could complicate the animal-induced sediment transport in streams would facilitate the use of biological variables (e.g., bioturbator biomass) in future modelling of the transport of solids.     

Initiation and development of pull-apart basins with Riedel shear mechanism: insights from scaled clay experiments

Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments.     

Focused ion beam technique and transmission electron microscope studies of microdiamonds from the Saxonian Erzgebirge, Germany

A focused ion beam of Ga ions is a relatively new technique that has been developed for microelectronic industries. Now researchers of the Earth sciences find it to be a promising tool for studying various geological materials. Using the FIB technique and an FEI Strata DB 235 dual beam system, we have successfully prepared several electron-transparent foils, which crossed μm-sized diamonds included in host minerals such as zircon and garnet from quartzofeldspathic rocks of the Saxonian Erzgebirge, Germany. Scanning and transmission electron microscopy applied to these foils revealed that the diamonds contain crystalline nanometric inclusions. These inclusions consist of minerals of known stoichiometries such as SiO₂ and Al₂SiO₅, whereas others are characterized by different combinations of Si, K, P, Ti, and Fe in the presence of oxygen (stoichiometries are not clear at this stage of research). One suite of inclusions is assumed to be represented by archerite, KH₂PO₄, which is known to be stable at pressures of 4–22 GPa, and one nanocrystal containing Pb, oxygen and carbon is interpreted to be Pb_xO_y or PbCO₃. Along with solid crystalline inclusions, the diamonds contain cavities filled by liquid/gas that escaped during sample preparation. These are associated with dislocations of diamond growth. Our data are consistent with the concept of diamond crystallization from a COH-rich multicomponent supercritical fluid and suggest that the composition of such a fluid is more consistent with a local crustal source rather than that of a mantle origin.