唐山地震的超晚期强余震估计

根据华北历史地震的重复性和免疫性，认为在唐山周围８５ｋｍ，２００年内，对６级地震具有一定的免疫性；在研究了唐山地震序列自身的衰减规律后，认为在今后几十几强余震的最大活动水平为５级，发生６级以上土地震的可能性很小。     

Adsorption of REE(III)-humate complexes onto MnO2: Experimental evidence for cerium anomaly and lanthanide tetrad effect suppression

Experiments were conducted to evaluate the impact of organic complexation on the development of Ce anomalies and the lanthanide tetrad effect during the adsorption of rare-earth elements (REE) onto MnO₂. Two types of aqueous solutions—NaCl and NaNO₃—were tested at pH 5 and 7.5. Time-series experiments indicate that a steady-state is reached within less than 10 h when REE occur as free inorganic species, whereas steady state is not reached before 10 d when REE occur as REE-humate complexes. The distribution coefficients (K_d^REE) between suspended MnO₂ and solution show no or only very weak positive Ce anomaly or lanthanide tetrad effect when REE occur as humate complexes, unlike the results obtained in experiments with REE occurring as free inorganic species. Monitoring of dissolved organic carbon (DOC) concentrations show that log K_d^REE_organic/K_d^DOC ratios are close to 1.0, implying that the REE and humate remain bound to each other upon adsorption. Most likely, the Ce anomaly reduction/suppression in the organic experiments arises from a combination of two processes: (i) inability of MnO₂ to oxidize Ce(III) because of shielding of MnO₂ surfaces by humate molecules and (ii) Ce(IV) cannot be preferentially removed from solution due to quantitative complexation of the REE by organic matter. We suggest that the lack of lanthanide tetrad effect arises because the adsorption of REE-humate complexes onto MnO₂ occurs dominantly via the humate side of the complexes (anionic adsorption), thereby preventing expression of the differences in Racah parameters for 4f electron repulsion between REE and the oxide surface. The results presented here explain why, despite the development of strongly oxidizing conditions and the presence of MnO₂ in the aquifer, no (or insignificant) negative Ce anomalies are observed in organic-rich waters. The present study demonstrates experimentally that the Ce anomaly cannot be used as a reliable proxy of redox conditions in organic-rich waters or in precipitates formed at equilibrium with organic-rich waters.     

Origin of salinity in a multilayered aquifer with high salinization vulnerability

The Kaluvelly watershed is a coastal area (Tamil Nadu, India) where water abstraction has resulted in a dramatic fall in the level of the water table and a piezometric depression in the most exploited aquifer, the Vanur aquifer. In addition, intensification/mechanization of agriculture may have affected the quality of recharge water. An initial hydrodynamic study showed that the Vanur aquifer is highly vulnerable to salinization due to potential seawater intrusion, and our aim was to determine the source of salinity recorded in the groundwater of this multilayered aquifer. Our approach involved the use of existing boreholes and of a moderate number of samples, with the aim of developing appropriate water resource management techniques. Major element, ¹⁸O/¹⁶O, ²H/¹H and ⁸⁷Sr/⁸⁶Sr, ratios were measured in rainwater, surface water and groundwater collected during five sampling campaigns over a 2‐year period. Geochemical data indicate that the Vanur aquifer is recharged and that small mixings between aquifers fluctuate according to monsoon intensity. There was no evidence of seawater intrusion. The range of recorded salinity originated mainly from water–rock interaction but a disconnection of some deeper parts of the aquifer was apparent. Strontium isotopic ratios in the recharge area suggest an anthropogenic influence, possibly related to fertilizer use. A high SO₄/Cl ratio was observed in the aquifer; in the deeper parts, the influence of a formation containing lignite is hypothesized, whereas near the surface, sulphate may partly originate from fertilizer use and fossil fuel combustion. Water isotopic data suggest that the origin of precipitation in this region has been unchanged for several hundreds or thousands of years. Copyright © 2011 John Wiley & Sons, Ltd.     

Consistency grammar for 3D indoor model checking

Indoor 3D models are digital representations of building interiors reconstructed from scanned data acquired by laser scanners, digital depth (RGBD) cameras, and CAD drawings. Consequently, there is noise in the source data and a notable variety in the methods used to treat the noise and to process these data into reconstructed models. Alas, the correctness of these reconstructions and thus their suitability for a given application are uncertain. There is a lack of a robust base logic that would allow for controlling the consistency of these (automatically) generated models. Fortunately, correctness criteria are well‐defined through existing international standards. Hence, we propose a conceptual framework based on formal grammars to check the semantic, geometric, and topological consistency of a reconstructed 3D model. The proposed method proceeds in three steps to validate the model: (1) correctness checking of individual components; (2) consistency verification of instances’ interactions; and (3) model consistency check for targeted applications. Our method identifies the components in the model that violate the given rules derived from the current standards and expert knowledge. Ultimately, we propose a quantified formulation of our method that may be straightforwardly integrated into industrial‐level model checkers. The approach is independent of level of details and reconstruction method.     

A generic space definition framework to support seamless indoor/outdoor navigation systems

Contemporary public buildings are becoming conglomerates of open, semi‐open and closed spaces, with indoor, outdoor and underground sections. For humans and robots to navigate seamlessly through such environments, new flexible approaches need to be developed. Navigation systems generally rely on a network (nodes and edges) as an abstraction of underlying space availability. However, indoor and outdoor networks have different origins. While indoor systems rely on indoor space subdivision approaches, current outdoor systems utilize road‐based network approaches. Linking such networks via particular nodes is possible but restrictive. Many spaces in the built environment are not strictly indoor or outdoor spaces and are thus often omitted from navigation networks, further limiting navigation options. To overcome these shortcomings, we introduce a new space definition framework in which the entire built environment is categorized into indoor, outdoor, semi‐indoor and semi‐outdoor spaces. We provide strict definitions for the four space categories. Our framework allows the same navigation network extraction approaches to be used and therefore enables seamless indoor/outdoor path computation for single or combinations of locomotion modes. The notions of semi‐indoor and semi‐outdoor spaces offer new options for further tailoring of the navigation path with respect to environmental factors, which we demonstrate with two use cases.     

Metal loading effect on rare earth element binding to humic acid: Experimental and modelling evidence

The effect of metal loading on the binding of rare earth elements (REE) to humic acid (HA) was studied by combining ultrafiltration and Inductively Coupled Plasma Mass Spectrometry techniques. REE-HA complexation experiments were performed at pH 3 for REE/C molar ratios ranging from ca 4 × 10⁻⁴ to 2.7 × 10⁻². Results show that the relative amount of REE bound to HA strongly increases with decreasing REE/C. A middle-REE (MREE) downward concavity is shown by patterns at high metal loading, whereas patterns at low metal loading display a regular increase from La to Lu. Humic Ion Model VI modelling are close to the experimental data variations, provided that (i) the ΔLK₂ parameter (i.e. the Model VI parameter taken into account the presence of strong but low density binding sites) is allowed to increase regularly from La to Lu (from 1.1 to 2.1) and (ii) the published log K_MA values (i.e. the REE-HA binding constants specific to Model VI) are slightly modified, in particular with respect to heavy REE. Modelling approach provided evidence that patterns with varying REE/C likely arises because REE binding to HA occurs through two types of binding sites in different density: (i) a few strong sites that preferentially complex the heavy REE and thus control the atterns at low REE/C; (ii) a larger amount of weaker binding sites that preferentially complex the middle-REE and thus control the pattern at high REE/C. Hence, metal loading exerts a major effect on HA-mediated REE binding, which could explain the diversity of published conditional constants for REE binding with HA. A literature survey suggests that the few strong sites activated at low REE/C could be multidentate carboxylic sites, or perhaps N-, or P-functional groups. Finally, an examination of the literature field data proposed that the described loading effect could account for much of the variation in REE patterns observed in natural organic-rich waters (DOC > 5 mg L⁻¹ and 4 ? pH ? 7).     

Origin and evolution of fluids from mud volcanoes in the Barbados accretionary complex

A large collection of fluids (54 interstitial fluids and four expelled fluids) were sampled at the Manon site, at the outer edge of the Barbados accretionary complex. These warm fluids (up to 20°C) are expelled by sub-marine (5000 mbsl) mud volcanoes consisting of diapirs (unchanneled flow) and diatremes (channeled).Chlorine stable isotope ratios of these fluids were measured by IRMS with a reproducibility of ± 0.05‰ (1σ) versus SMOC (Standard Mean Ocean Chloride).A large range of δ³⁷Cl between −5.3‰ and +0.1‰ is observed. Data from each volcanic structure describe a mixing between seawater and a low-δ³⁷Cl fluid. The whole set of data is interpreted as the result of a mixing between two deep components and seawater. The two deep fluids are chemically distinct (e.g., in Ca, Mg, K, Li, Sr and Br contents and Br/Cl ratio). They display low and significantly different ⁸⁷Sr/⁸⁶Sr ratios (0.707790 and 0.707892, respectively) and δ³⁷Cl values (−4.51 and −5.24‰, respectively).Physicochemical processes such as mineralogical transformation, diffusion, compaction or ion filtration are known to fractionate chlorine stable isotopes and can produce fluids with negative δ³⁷Cl values. Ion filtration due to sediment compaction appears to be the more likely process to explain the negative δ³⁷Cl values observed at the Manon site. A model for the generation of these signatures is proposed where a residual negative δ³⁷Cl fluid reservoir is created at the bottom of the prism or the sediment pile. Further compaction/fracturing and/or dewatering of the slab may flush out these fluids and focus them towards the décollement zone. Mixing between the fluids and ultimately with seawater and water released during gas hydrate destabilizations may explain the data set within the individual cores and between the different structures.     

Discrimination between different water bodies from a multilayered aquifer (Kaluvelly watershed,India): Trace element signature

In the multilayered aquifer of Kaluvelly (India), comprising various sedimentary layers overlying a charnockitic basement, concentrations of trace elements were measured in aquifer formations and in groundwaters to identify geochemical tracers for water bodies. The two main sandstones (Cuddalore and Vanur) originate from the charnockites and the Cuddalore sandstone has experienced lateritization. In the studied area, two charnockite end-members were identified: a dioritic and a granitic one. Mineralogical composition and whole-rock Ti concentrations confirmed the charnockite which displayed the granitic composition as the parent rock of the two sandstones. Titanium distribution indicates that the Cuddalore sandstone originates from a more intense weathering of the parent material than the Vanur sandstone. Despite extensive differences in trace element contents recorded in aquifer formations, only a few trace elements were suitable to distinguish the water bodies. Among soluble elements, Li (in the Vanur aquifer) and Ba (in the charnockite and carbonaceous aquifers) can be used as tracers. As the input of these elements in solution is mainly regulated by the available stock, for a given mineralogical origin there is a direct link between the aquifer formation composition and water signature. With the exception of As, concentrations of redox-sensitive elements were not preserved during pumping because of oxidation, preventing their use as tracers. Low-mobility elements such as La, Ce, Th, Zr, Nb, Hf, or Ta were too insoluble to be detected in waters and/or to record the aquifer formation signature. Their input in solution was not regulated by the available stock but by the dissolution rate of rock-forming minerals. Only Ti can be used to distinguish between two out of the three aquifers (charnockite and Vanur). The specific behavior of Ti recorded in these waters may be linked to rutile inclusions within plagioclases and to the influence of climate on Ti solubility.     

Weather conditions associated with the passage of precipitation type transition regions over eastern Newfoundland

Abstract

The passage of a winter storm is accompanied by changes in many surface and near‐surface parameters including temperature, humidity, wind, pressure, precipitation rate and type, cloud base height, visibility and accretion. These parameters were measured in association with the passage of precipitation‐type transitions over Newfoundland during the Canadian Atlantic Storms Program II field experiment. Three simple summaries of the observed weather events were developed. These summaries depend on the observed large‐scale synoptic conditions, which include warm fronts, a cold front and a trough.