A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

Validation of a time-domain strip method to calculate the motions and loads on a fast monohull

The paper presents a comparison between experimental data and numerical results of the hydrodynamic coefficients and also of the wave induced motions and loads on a fast monohull model. The model with 4.52 m length was constructed in Fibre Reinforced Plastic (FRP), and made up of 4 segments connected by a backbone in order to measure sectional loads. The objective of the investigation was to assess the capability of a nonlinear time domain strip method to represent the nonlinear and also the forward speed effects on a displacement high speed vessel advancing in large amplitude waves. With this objective in mind the experimental program included forced oscillation tests in heaving and pitching, for a range of periods, three different amplitudes and several speeds of advance. In head regular waves comprehensive ranges of wave periods, wave steepness and speeds, were tested in order to measure heave, pitch and loads in three cross sections.

The numerical method assumes that the radiation and diffraction hydrodynamic forces are linear and the nonlinear contributions arise from the hydrostatics and Froude–Krilov forces and the effects of green water on deck. The assumption of linearity of the radiation forces is validated by comparing calculated hydrodynamic coefficients with experimental data for three different amplitudes of the forced oscillations. Both global coefficients and sectional coefficients are compared. The motions and loads in waves are compared in terms of first and higher harmonic amplitudes and also in terms of sagging and hogging peaks.     

Long term prediction of non-linear vertical bending moments on a fast monohull

An assessment is made of the maximum wave induced bending moment expected to occur during the operational lifetime of a fast monohull, based on long term distribution calculations of the non-linear vertical bending moment at mid-ship. The ship is assumed to operate in the Northern North Sea, with an operational life of 25 years. A succession of short-term stationary ship responses represented by Rayleigh distributions of peaks results in the long-term distribution of the structural loads. Non-linear pseudo transfer functions are used in the procedure to calculate the variances of the short-term responses. The amplitudes of these transfer functions are calculated by a non-linear time domain seakeeping program. The results are compared with rules minimum required values and also with results from simpler calculation procedures such as adopting design sea states.     

冲绳海槽轴线地质特征

冲绳海槽位于东海大陆架与琉球岛弧之间，海槽中发育着一系列平行轴向延伸的地堑型正断层。穿越海槽的地震剖面证实了海槽扩张中心的存在，扩张轴沿海槽轴线方向延伸。由于地堑构造中心的扩张速率较大，由某引起的海槽中心下陷的速率大于沉积作用的补偿速率，使海槽中心海底出现明显的下陷。在轴线的大陆坡一侧，陆源沉积占绝对优势；轴线的岛坡一侧，以火山坡碎屑、浮岩、有孔虫软泥为沉积特征。     

Tunneling and interference of Alfvén waves

The propagation and interference of Alfvén waves in magnetic regions is studied. A multilayer approximation of the standard models of the solar atmosphere is used. In each layer, there is a linear law of temperature variation and a power law of Alfvén velocity variation. The analytical solutions of a wave equation are stitched at the layer boundaries. The low-frequency Alfvén waves (P > 1 s) are able to transfer the energy from sunspots into the corona by tunneling only. The chromosphere is not a resonance filter for the Alfvén waves. The interference and resonance of Alfvén waves are found to be important to wave propagation through the magnetic coronal arches. The transmission coefficient of Alfvén waves into the corona increases sharply on the resonance frequences. To take into account the wave absorption in the corona, a method of equivalent schemes is developed. The heating of a coronal arch by Alfvén waves is discussed.     

Holocene record of productivity in the NW Iberian continental shelf

A multiproxy approach (textural characteristics, heavy metal concentrations and benthic foraminifera data) was adopted to study the OMEX core KSGX 40, collected at the Galicia Mud Deposit (NW Iberian outer continental shelf) and recording the last ca. 4.8 ka cal BP. Geochemical profiles of Fe, Mn, Zn, Co, Cr, Cu, Ni, Pb, Al and Ca show significant temporal variations. Benthic foraminifera productivity proxy suggests that the recorded muddy events were contemporaneous of a higher C_org flux to the marine benthic environment. The higher flux of organic matter, following a long-term intensification of the upwelling and coinciding with a finer sedimentation, led to depressed levels of oxygen beneath the water-sediments interface and to early diagenetic processes of several redox-sensitive elements.     

HP–LT Variscan metamorphism in the Cubito-Moura schists (Ossa-Morena Zone, southern Iberia)

Multi-equilibrium thermobarometry shows that low-grade metapelites (Cubito-Moura schists) from the Ossa–Morena Zone underwent HP–LT metamorphism from 340–370 °C at 1.0–0.9 GPa to 400–450 °C at 0.8–0.7 GPa. These HP–LT equilibriums were reached by parageneses including white K mica, chlorite and chloritoid, which define the earliest schistosity (S₁) in these rocks. The main foliation in the schists is a crenulation cleavage (S₂), which developed during decompression from 0.8–0.7 to 0.4–0.3 GPa at increasing temperatures from 400–450 °C to 440–465 °C. Fe³⁺ in chlorite decreased greatly during prograde metamorphism from molar fractions of 0.4 determined in syn-S₁ chlorites down to 0.1 in syn-S₂ chlorites. These new data add to previous findings of eclogites in the Moura schists indicating that a pile of allochtonous rocks situated next to the Beja-Acebuches oceanic amphibolites underwent HP–LT metamorphism during the Variscan orogeny. To cite this article: G. Booth-Rea et al., C. R. Geoscience 338 (2006).     

Zircon geochronology and Sm–Nd isotopic study: Further constraints for the Archean and Paleoproterozoic geodynamical evolution of the southeastern Guiana Shield, north of Amazonian Craton, Brazil

The eastern part of the Guiana Shield, northern Amazonian Craton, in South America, represents a large orogenic belt developed during the Transamazonian orogenic cycle (2.26–1.95 Ga), which consists of extensive areas of Paleoproterozoic crust and two major Archean terranes: the Imataca Block, in Venezuela, and the here defined Amapá Block, in the north of Brazil.

Pb-evaporation on zircon and Sm–Nd on whole rock dating were provided on magmatic and metamorphic units from southwestern Amapá Block, in the Jari Domain, defining its long-lived evolution, marked by several stages of crustal accretion and crustal reworking. Magmatic activity occurred mainly at the Meso-Neoarchean transition (2.80–2.79 Ga) and during the Neoarchean (2.66–2.60 Ga). The main period of crust formation occurred during a protracted episode at the end of Paleoarchean and along the whole Mesoarchean (3.26–2.83 Ga). Conversely, crustal reworking processes have dominated in Neoarchean times. During the Transamazonian orogenic cycle, the main geodynamic processes were related to reworking of older Archean crust, with minor juvenile accretion at about 2.3 Ga, during an early orogenic phase. Transamazonian magmatism consisted of syn- to late-orogenic granitic pulses, which were dated at 2.22 Ga, 2.18 Ga and 2.05–2.03 Ga. Most of the ε_Nd values and T_DM model ages (2.52–2.45 Ga) indicate an origin of the Paleoproterozoic granites by mixing of juvenile Paleoproterozoic magmas with Archean components.

The Archean Amapá Block is limited in at southwest by the Carecuru Domain, a granitoid-greenstone terrane that had a geodynamic evolution mainly during the Paleoproterozoic, related to the Transamazonian orogenic cycle. In this latter domain, a widespread calc-alkaline magmatism occurred at 2.19–2.18 Ga and at 2.15–2.14 Ga, and granitic magmatism was dated at 2.10 Ga. Crustal accretion was recognized at about 2.28 Ga, in agreement with the predominantly Rhyacian crust-forming pattern of the eastern Guiana Shield. Nevertheless, T_DM model ages (2.50–2.38 Ga), preferentially interpreted as mixed ages, and ε_Nd < 0, point to some participation of Archean components in the source of the Paleoproterozoic rocks. In addition, the Carecuru Domain contains an oval-shaped Archean granulitic nucleus, named Paru Domain. In this domain, Neoarchean magmatism at about 2.60 Ga was produced by reworking of Mesoarchean crust, as registered in the Amapá Block. Crustal accretion events and calc-alkaline magmatism are recognized at 2.32 Ga and at 2.15 Ga, respectively, as well as charnockitic magmatism at 2.07 Ga.

The lithological association and the available isotopic data registered in the Carecuru Domain suggests a geodynamic evolution model based on the development of a magmatic arc system during the Transamazonian orogenic cycle, which was accreted to the southwestern border of the Archean Amapá Block.     

The effect of thermal treatment on the 57Fe Mössbauer spectrum of beryl

Mössbauer spectra (MS) of blue, green and yellow beryl (ideally Be₃Al₂Si₆O₁₈) containing approximately 1% of iron were obtained at 295 and 500 K. Room temperature (RT) spectra of both blue and green samples showed the presence of an asymmetric Fe²⁺ doublet (ΔE _Q~2.7 mm/s, δ~1.1 mm/s), with a very broad low-velocity peak. There is no clear evidence for the presence of a ferric component. The MS of the yellow sample at RT consists of an intense central absorption with parameters typical for Fe³⁺ (ΔE _Q~0.4 mm/s, δ~0.29 mm/s), plus an apparently symmetrical Fe²⁺ doublet. This sample acquires a light-blue shade upon heating in air at about 620 K. Thermal treatments at high temperatures caused no significant changes in the MS, but the green and yellow beryl acquire a blue colour. All these results are interpreted in relation to the existence of channel water and the distribution of iron among the available crystallographic sites.