Terrestrial discharge influences microbioerosion and microbioeroder community structure in coral reefs

Microbioerosion rates and microbioeroder community structure were studied in four Kenyan protected coral-reef lagoons using shell fragments of Tridacna giant clams to determine their response to the influence of terrestrial run-off. Fourteen different microbioeroder traces from seven cyanobacteria, three green algae and four fungi species were identified. The river discharge-impacted reef and ‘pristine’ reef showed similar composition but higher microbioeroder abundance and total cyanobacteria- and chlorophyte-bioeroded areas when compared with the other study reefs. Cyanobacteria dominated during the north-east monsoon (NEM) relative to the south-east monsoon (SEM) season, with algae and cyanobacteria being major microbioeroders in the river-impacted and pristine reefs. The rate of microbioerosion varied between 4.3 g CaCO3 m^?2 y^?1 (SEM) and 134.7 g CaCO₃ m^?2 y^?1 (NEM), and was highest in the river-impacted reef (127.6 g CaCO₃ m^?2 y^?1), which was almost double that in the pristine reef (69.5 g CaCO₃ m^?2 y^?1) and the mangrove-fringed reef (56.2 g CaCO₃ m^?2 y^?1). The microbioerosion rates measured in this study may not be high enough to cause concern with regard to the health and net carbonate production of Kenya’s coral reefs. Nevertheless, predicted increases in the frequency and severity of stresses related to global climate change (e.g. increased sea surface temperature, acidification), as well as interactions with local disturbances and their influence on bioerosion, may be increasingly important in the future.     

Proposed seismic hazard maps of Sumatra and Java islands and microzonation study of Jakarta city,Indonesia

This paper presents the development of spectral hazard maps for Sumatra and Java islands, Indonesia and microzonation study for Jakarta city. The purpose of this study is to propose a revision of the seismic hazard map in Indonesian Seismic Code SNI 03-1726-2002. Some improvements in seismic hazard analysis were implemented in the analysis by considering the recent seismic activities around Java and Sumatra. The seismic hazard analysis was carried out using 3-dimension (3-D) seismic source models (fault source model) using the latest research works regarding the tectonic setting of Sumatra and Java. Two hazard levels were analysed for representing 10% and 2% probability of exceedance (PE) in 50 years ground motions for Sumatra and Java. Peak ground acceleration contour maps for those two hazard levels and two additional macrozonation maps for 10% PE in 50 years were produced during this research. These two additional maps represent short period (0.2 s) and long-period (1.0 s) spectra values at the bedrock. Microzonation study is performed in order to obtain ground motion parameters such as acceleration, amplification factor and response spectra at the surface of Jakarta. The analyses were carried out using nonlinear approach. The results were used to develop contour of acceleration at the surface of Jakarta. Finally, the design response spectra for structural design purposes are proposed in this study.     

Dynamics of ship collisions

This paper described a procedure for simulation of the outer dynamics in ship collisions.The simulation procedure is derived using the transient equations for the horizontal motion of a ship. The hydrodynamic forces acting on the ships' hull during the collision are calculated by a strip method, where the forces acting on each section are described by means of unit response functions. These functions are determined by cosine transformation of the sectional dampings. The sectional added masses and dampings, and thereby also the sectional unit response functions, are calculated by an approximate method. The deformations of the slip structures during the collisions are modelled as non-linear springs.The resulting system of non-linear equations is solved using a numerical time-integration procedure.A number of different collision situations are simulated by means of the procedure.     

The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.     

油田开发中后期岩相单元的细分研究

油田开发中后期建立在原小层对比和沉积微相基础上的储层地质模型已不能适应调整挖潜和剩余油分布研究的要求,需要在小层划分的基础上,进一步细分到岩相单元。本文以大庆长垣南部葡北油田葡I组油层为例提出岩相单元的概念,通过现代沉积研究论证岩相单元细分的可行性,结合密井网测井曲线分析旋回性、隔夹层分布的稳定性及目前经济技术和采油工艺等,探讨细分单元的基本原则。最后提出岩相单元细分的基本方法。     

Greenhouse Gas Emissions and Costs over the Life Cycle of Wood and Alternative Flooring Materials

Increased use of wood can substitute more energy demanding products and thus contribute to a long-term solution to the global warming problem. The aim of this article is to provide an empirical study on this substitution impact, its cost-effectiveness, and which methodological assumptions that are of highest importance for the results obtained. We have made a case study where we compare use of various flooring materials. The results show that floor covering in solid oak causes lower greenhouse gas (GHG) emissions than the other materials. The difference can be ranked in the following order, after their potential for reduction in GHG emissions: Carpet in wool, carpet in polyamide, vinyl, and linoleum. At 2% pro anno discount rate, the avoided GHG emission in tons per m³ of oak flooring used is 0.1–1.9 for linoleum, and 11.8–15.5 for wool carpets. Unless the solution in solid oak is on total less expensive over the lifetime of the building, only the price of avoided emissions from a substitution between solid oak and carpet in wool is reasonable, compared to present carbon fees. The assumptions that influence the result most are choice of discount rate, carbon fixation on forest area, and waste handling. Empirical case studies like this indicate GHG emission reduction potentials caused by substitution, but should be complemented by dynamic input/output analyses and econometric studies. To analyse the flow of CO₂ over time, they should also be linked to forest management models.     

Biogenic and lithogenic magnetic minerals in Atlantic and Pacific deep sea sediments and their paleomagnetic significance

The carrier of the natural magnetization of deep sea sediments was characterized by mineralogical, electron microscopic, and rock magnetic investigations. Magnetic single domain (SD) and pseudo single domain (PSD) particles which are most important for the stable remanent magnetization were separated from the magnetic »coarse fraction« and concentrated as magnetic »fine fraction«. The magnetic coarse fraction consists of lithogenic magnetite and titanomagnetite, which often contains exsolution-lamellae of ilmenite. Both minerals are partially maghematized and occur isolated in the sediment or embedded in rock particles, in regionally different concentrations. The magnetic fine fraction consists of lithogenic magnetite and titanomagnetite and biogenic magnetite (magnetofossils = fossil bacterial magnetosomes), the latter generally maghematized.A graphical method is described which allows the classification and characterization of the magnetic fine fraction by demagnetization of the anhysteretic remanent magnetization (ARM) of whole sediment samples. Three groups with different magnetic properties can be distinguished, characterized by three ARM type-curves: Type A curves are associated with sediments from abyssal plaines. They show nearly identical ARM properties and are typical for magnetofossils.Type B curves are produced by sediments from the vicinity of volcanic regions. Their shapes are variable to a certain degree and indicate two lithogenic magnetic phases.Type C curves are found for sediments from submarine ridges and regions with input of terrigenous detritus. These curves have the largest deviations among each other indicating a magnetic multi-phase assemblage including magnetofossils.

---

Zusammenfassung Die Träger der Magnetisierung von Tiefseesedimenten wurden mineralogisch, elektronenmikroskopisch und gesteinsmagnetisch untersucht. Magnetische Eindomänen (SD) und Pseudo-Eindomänen (PSD) Partikel, die für eine stabile remanente Magnetisierung wichtig sind, wurden als magnetische »Feinfraktion« von der magnetischen »Grobfraktion« abgetrennt. Die magnetische Grobfraktion besteht aus lithogenem Titanomagnetit und Magnetit die teilweise maghemitisiert sind und teilweise auch Ilmenit-Entmischungslamellen aufweisen. In regional unterschiedlichen Konzentrationen liegen sie frei im Sediment oder in silikatischer Matrix eingebettet vor. Die magnetische Feinfraktion besteht sowohl aus lithogenem Titanomagnetit und Magnetit, als auch aus biogenem Magnetit (Magnetofossilien = fossile bakterielle Magnetosomen); letzterer ist größtenteils maghemitisiert.Es wird eine grafische Darstellungsmethode beschrieben, die anhand von Untersuchungen der anhysteretischen remanenten Magnetisierung (ARM) von Sedimentproben eine Charakterisierung der magnetischen Feinfraktion erlaubt. Es lassen sich dadurch drei Gruppen mit unterschiedlichen magnetischen Eigenschaften unterscheiden, die durch drei Gruppen von ARM-Kurventypen charakterisiert sind.Kurventyp A wird bei Sedimenten aus Tiefsee-Ebenen beobachtet. Die ARM-Daten sind nahezu identisch und zeigen ein Verhalten, wie es für Magnetofossilien typisch ist. Kurventyp B tritt bei Sedimenten aus dem Einzugsbereich vulkanischer Gebiete auf. Er zeigt eine größere Variation und die Form der Kurven spricht für ein System aus zwei lithogenen magnetischen Komponenten.Kurventyp C gehört zu Sedimenten aus submarinen Rücken und dem Einzugsgebiet terrigener Schüttungen. Die Kurvenverläufe sind uneinheitlich und sprechen für ein magnetisches Mehrkomponenten-System mit Beteiligung von Magnetofossilien.

---

Résumé Les minéraux porteurs du magnétisme dans les sédiments de mer profonde ont été explorés par les méthodes de la minéralogie, de la microscopie électronique et du magnétisme des roches. Les particules qui correspondent à un domaine magnétique unique (SD) et pseudo-unique (PSD), significatives pour un magnétisme rénanent stable, ont été concentrées comme «fraction magnétique fine» après séparation de la «fraction magnétique grossière». Cette dernière consiste en magnétite et titanomagnétite lithogéniques, qui renferment souvent des lamelles d'exsolution d'ilménite. Ces deux minéraux sont partiellement maghémitisés; ils se présentent isolés ou inclus dans des fragments de roches, avec des concentrations régionales diverses. La fraction magnétique fine consiste en magnétite et titanomagnétite lithogéniques, ainsi qu'en magnétite biogénique (magnétofossile = magnétosome fossile bactérien), cette dernière ordinairement maghemitisée.Les auteurs présentent une méthode graphique qui permet de caractériser la fraction magnétique fine à partir de l'examen du magnétisme rémanent anhystérique (ARM) de l'échantillon de sédiment. Cette méthode permet de distinguer trois groupes de propriétés magnétiques différentes, caractérisés par trois types de courbes ARM. Les courbes de type A caractérisent les sédiments de plaines abyssales; elles montrent des propriétés ARM presque identiques et sont typiques pour les magnétofossiles. Les courbes de types B sont fournies par les sédiments voisins des régions volcaniques; leurs formes varient dans une certaine mesure et indiquent un système à deux composants magnétiques lithogéniques. Les courbes de type C correspondent aux sédiments des crêtes sous-marines et des régions à apports terrigènes; ces courbes présentent entre elles des différences plus marquées, ce qui indique un système magnétique à composants multiples, comportant des magnétofossiles.

---

, - . (SD) (PSD) , , » « » «. . . , . , , . » « , , — , , ; . (ARM) , . , ARM. , . - , .

     

False drainage anomalies (?) in a granite area, Kvalöya in Troms, Norway — a case study

An anomalous area (100 km²) revealed by a previous regional overbank sediment sampling survey by the Geological Survey of Norway was followed-up for Ti, Nb, Y, Zr, La and Ce by drainage and lithogeochemical sampling and analyses. The drainage samples were anomalous in the same elements as in the overbank samples and contained similar concentrations. The lithogeochemical results did not indicate mineralization and showed only a small enhancement of Ti, Zr, La and Ce in mylonitic rocks.Mineralogical studies of the drainage samples revealed, apart from proportions of quartz and feldspars, that stream sediments and heavy mineral concentrates are similar in mineralogy, with epidote predomination and several vol% of fine-grained titanite and zircon. Drainage samples contained amounts of Nb, Y, and Zr up to ten times larger than average contents of rock samples. Enhanced light REE (La and Ce) and Nb reflect host minerals, titanite, and enhanced Y possibly zircon and/or allanite.Anomalies in both media do not relate to mineralization. The overbank samples and the drainage samples provide comparable geochemical data.