Antenna design and implementation for the future space Ultra-Long wavelength radio telescope

In radio astronomy, the Ultra-Long Wavelengths (ULW) regime of longer than 10 m (frequencies below 30 MHz), remains the last virtually unexplored window of the celestial electromagnetic spectrum. The strength of the science case for extending radio astronomy into the ULW window is growing. However, the opaqueness of the Earth’s ionosphere makes ULW observations by ground-based facilities practically impossible. Furthermore, the ULW spectrum is full of anthropogenic radio frequency interference (RFI). The only radical solution for both problems is in placing an ULW astronomy facility in space. We present a concept of a key element of a space-borne ULW array facility, an antenna that addresses radio astronomical specifications. A tripole–type antenna and amplifier are analysed as a solution for ULW implementation. A receiver system with a low power dissipation is discussed as well. The active antenna is optimized to operate at the noise level defined by the celestial emission in the frequency band 1 ? 30 MHz. Field experiments with a prototype tripole antenna enabled estimates of the system noise temperature. They indicated that the proposed concept meets the requirements of a space-borne ULW array facility.     

Cluster Analysis of Petrophysical and Geological Parameters for Separating the Electrofacies of a Gas Carbonate Reservoir Sequence

Natural Resources Research - Assessing reservoir properties and knowing the relationship between different reservoir parameters can significantly help to plan for production from a reservoir. In...     

A Study on the Surface Wettability of Clastic Rocks with Potential Application for CO2 Storage Sites

Natural Resources Research - There have been many studies carried out in the past decades attempting to develop strategies for a safe injection of CO2 into storage sites without leakage and...     

Thermal stability of a layer with permeable boundaries and variable gravitational field

The aim of this paper is to investigate the thermal stability of a fluid layer with permeable boundaries and a variable gravitational field. It is observed that the principle of exchange of stabilities is valid when the layer is heated form below and the complex growth rate of an arbitrary oscillatory mode exists outside of a circle whose radius depends upon the permeability parameter, Prandtl number and wavelength of the mode. In the case of a layer heated from below, gravity increasing upward has a destabilizing effect whereas the permeability parameter has a stabilizing effect.     

Spectra of quasiperiodic oscillations of galactic X-ray sources–dynamical regimes from a simple model

We suggest that the dynamical regime(s) underlying quasi-periodic oscillations observed in the spectra of bright galactic-bulge X-ray sources are nonlinear with a mixed phase space. The important feature of such regimes is that they are generic among nonlinear Hamiltonian and nearly Hamiltonian systems of more than two degrees of freedom. We give a simple example of such chaotic (deterministic) systems whose spectra share a number of features with those observed for quasiperiodic oscillations of such sources.     

Revised age of proximal deposits in the Zagros foreland basin and implications for Cenozoic evolution of the High Zagros

The regionally extensive, coarse-grained Bakhtiyari Formation represents the youngest synorogenic fill in the Zagros foreland basin of Iran. The Bakhtiyari is present throughout the Zagros fold-thrust belt and consists of conglomerate with subordinate sandstone and marl. The formation is up to 3000 m thick and was deposited in foredeep and wedge-top depocenters flanked by fold-thrust structures. Although the Bakhtiyari concordantly overlies Miocene deposits in foreland regions, an angular unconformity above tilted Paleozoic to Miocene rocks is expressed in the hinterland (High Zagros).

The Bakhtiyari Formation has been widely considered to be a regional sheet of Pliocene–Pleistocene conglomerate deposited during and after major late Miocene–Pliocene shortening. It is further believed that rapid fold growth and Bakhtiyari deposition commenced simultaneously across the fold-thrust belt, with limited migration from hinterland (NE) to foreland (SW). Thus, the Bakhtiyari is generally interpreted as an unmistakable time indicator for shortening and surface uplift across the Zagros. However, new structural and stratigraphic data show that the most-proximal Bakhtiyari exposures, in the High Zagros south of Shahr-kord, were deposited during the early Miocene and probably Oligocene. In this locality, a coarse-grained Bakhtiyari succession several hundred meters thick contains gray marl, limestone, and sandstone with diagnostic marine pelecypod, gastropod, coral, and coralline algae fossils. Foraminiferal and palynological species indicate deposition during early Miocene time. However, the lower Miocene marine interval lies in angular unconformity above ~ 150 m of Bakhtiyari conglomerate that, in turn, unconformably caps an Oligocene marine sequence. These relationships attest to syndepositional deformation and suggest that the oldest Bakhtiyari conglomerate could be Oligocene in age.

The new age information constrains the timing of initial foreland-basin development and proximal Bakhtiyari deposition in the Zagros hinterland. These findings reveal that structural evolution of the High Zagros was underway by early Miocene and probably Oligocene time, earlier than commonly envisioned. The age of the Bakhtiyari Formation in the High Zagros contrasts significantly with the Pliocene–Quaternary Bakhtiyari deposits near the modern deformation front, suggesting a long-term (> 20 Myr) advance of deformation toward the foreland.     

Three-dimensional discontinuous deformation analysis (3-D DDA) using a new contact resolution algorithm

This paper presents a new contact calculating algorithm for contacts between two polyhedra with planar boundaries in the three-dimensional discontinuous deformation analysis (3-D DDA). In this algorithm, all six type contacts in 3-D (vertex-to-face, vertex-to-edge, vertex-to-vertex, face-to-face, edge-to-edge, and edge-to-face) are simply transformed into the form of point-to-face contacts. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. In this paper, formulations of normal contact, shear contact and frictional force submatrices based on the new method are derived and the algorithm has been programmed in VC⁺⁺. Examples are provided to demonstrate the new contact rule between two blocks.     

Structural elements of the Makran region, Oman sea and their potential relevance to tsunamigenisis

The character of convergence along the Arabian–Iranian plate boundary changes radically eastward from the Zagros ranges to the Makran region. This appears to be due to collision of continental crust in the west, in contrast to subduction of oceanic crust in the east. The Makran subduction zone with a length of about 900 km display progressively older and highly deformed sedimentary units northward from the coast, together with an increase in elevation of the ranges. North of the Makran ranges are large subsiding basins, flanked to the north by active volcanoes. Based on 2D seismic reflection data obtained in this study, the main structural provinces and elements in the Gulf of Oman include: (i) the structural elements on the northeastern part of the Arabian Plate and, (ii) the Offshore Makran Accretionary Complex. Based on detailed analysis of these data on the northeastern part of the Arabian Plate five structural provinces and elements—the Musendam High, the Musendam Peneplain, the Musendam Slope, the Dibba Zone, and the Abyssal Plain have been identified. Further, the Offshore Makran Accretionary Complex shown is to consist Accretionary Prism and the For-Arc Basin, while the Accretionary Prism has been subdivided into the Accretionary Wedge and the Accreted/Colored Mélange. Lastly, it is important to note that the Makran subduction zone lacks the trench. The identification of these structural elements should help in better understanding the seismicity of the Makran region in general and the subduction zone in particular. The 1945 magnitude 8.1 tsunamigenic earthquake of the Makran and some other historical events are illustrative of the coastal region’s vulnerability to future tsunami in the area, and such data should be of value to the developing Indian Ocean Tsunami Warning System.     

Crustal xenoliths from Calbuco Volcano,Andean Southern Volcanic Zone: implications for crustal composition and magma-crust interaction

Crustal xenoliths in the 1961 andesite flow of Calbuco Volcano, in the southern Southern Volcanic Zone (SSVZ) of the Andes, consist predominantly of pyroxene granulites and hornblende gabbronorites. The granulites contain plagioclase+pyroxene+magnetite±amphibole, and have pronounced granoblastic textures. Small amounts of relict amphibole surrounded by pyroxene-plagioclase-magnetite-glass symplectites are found in some specimens. These and similar textures in the gabbronorites are interpreted as evidence of dehydration melting. Mineral and bulk rock geochemical data indicate that the granulites are derived from an incompatible trace element depleted basaltic protolith that underwent two stages of metamorphism: a moderate pressure, high temperature stage accompanied by melting and melt extraction from some samples, followed by thermal metamorphism after entrainment in the Calbuco andesite lavas. High _Nd ^T values (+4.0 to +8.6), Nd-isotope model ages of 1.7–2.0 Ga, and trace element characteristics like chondrite normalized La/Yb< and La/Nb1 indicate that the protoliths were oceanic basalts. Similar oceanic metabasalts of greenschist to amphibolite facies are found in the Paleozoic metamorphic belt that underlies the Chilean coastal ranges. Mineral and bulk rock compositions of the gabbronorite xenoliths indicate that they are cognate, crystallizing from the basaltic andesite magma at Calbuco. Crystallization pressures for the gabbros based on total Al contents in amphibole are 6–8 kbar. These pressures point to middle to lower crustal storage of the Calbuco magma. Neither granulite nor gabbro xenoliths have the appropriate geochemical characteristics to be contaminants of Calbuco andesites, although an ancient sedimentary contaminant is indicated by the lava compositions. The presence of oceanic metabasaltic xenoliths, together with the sedimentary isotopic imprint, suggests that the lower crust beneath the volcano is analogous to the coastal metamorphic belt, which is an accretionary complex of intercalated basalts and sediments that formed along the Paleozoic Gondwanan margin. If this is the case, the geochemical composition of the lower and middle crust beneath the SSVZ is significantly different from that of most recent SSVZ volcanic rocks.     

Composition-related microstructures in zinc-bearing carbonate assemblages from Broken Hill,New South Wales

Summary Analytical transmission electron microscopy has been used to investigate two zincian dolomites occurring as overgrowths on calcite from the oxidized zone of the ore bodies at Broken Hill, New South Wales. Particular attention has been focussed on the nature of the microstructures, and any correlations between microstructure and local composition, especially zinc content. The possible occurrence of tiny amounts of the zinc dolomite, minrecordite, has also been explored.The most notable features in the zincian dolomite are fine-scale distributions of ribbonlike calcitic second phase, growth bands, and modulated microstructures (strong modulations in diffraction contrast). Their occurrence is correlated with calcium in excess of stoichiometric requirements, but is not directly influenced by zinc content. The associated calcites are low in zinc, but they also exhibit carbonate second phase, which is thought to be dolomitic although giving no detectable order (b-type) reflections. Long-exposure electron diffraction patterns, however, revealed the presence of diffuse c-type superstructure reflections, which are thought to arise from smaller volumes in which Ca and Mg cations are ordered, for which a model is proposed.

---

Zusammensetzungsabhängige Mikrogefüge in Zn-haltigen Karbonat-Vergesellschaftungen von Broken Hill, New South Wales

Zusammenfassung Analytische Transmissionselektronenmikroskopie wurde benutzt um zwei Zn-haltige Dolomite zu untersuchen, die als Überzüge von Calcit aus der Oxidationszone der Erzkörper von Broken Hill, New South Wales, auftraten. Besondere Aufmerksamkeit wurde der Art der Mikrogefüge und möglichen Korrelationen zwischen Mikrogefüge und der lokalen Zusammensetzung, vor allem dem Zn-Gehalt, gewidmet. Dem möglichen Auftreten von geringen Mengen des Zn-Dolomit, Minrecordit, wurde ebenfalls nachgegangen.Die bemerkenswertesten Erscheinungen im Zn-haltigen Dolomit sind feine bandartige Verteilung einer calcitischen Phase, Wachstumsbänder und modulierte Strukturen (starke Modulationen im Beugungskontrast sichtbar). Ihr Auftreten ist mit über das stöchiometrische Verhältnis hinaus vorhandenem Ca korreliert; es ist aber vom Zn-Gehalt nicht direkt beeinflußt. Die mitvergesellschafteten Calcite haben einen niedrigen Zn-Gehalt, zeigen aber eine weitere Karbonatphase. Diese wird für dolomitsch gehalten, obwohl keine entsprechenden Ordnungsreflexe (b-Reflexè) nachweisbar waren. Sehr lange belichtete Elektronenbeugungs-Aufnahmen zeigen jedoch diffuse c-Typ-Über-struktur-Reflexe. Diese sind wahrscheinlich auf kleine Bereiche beschränkt, in dener die Ca und Mg Kationen geordnet sind, wofür ein Modell vorgeschlagen wird.

---

---

With 10 Figures