Shapes and Pole Orientations of Asteroids (360) Carlova and (209) Dido

Several light-curves of asteroid (360) Carlova and (209) Dido in different epochs were analyzed to determine shapes and pole orientations by means of AM-method and least squares method. New values of a/b, b/c, λ _p and β _p for asteroid (360) Carlova were obtained, which are 1.52°, 1.5°, 120 ± 6° and 66 ± 7°, respectively. We report a first determination of the parameters of (209) Dido which are 1.3°, 1.1°, 221 ± 6° and 37 ± 3°, respectively.     

CCD Photometry of Asteroid （147） Protogeneia

We measured the light-curve of the asteroid (147) Protogeneia in November 2004, with a CCD detector attached to the 1-meter telescope at the Yunnan Observatory, China. The synodic period and maximum amplitude of (147) at this apparition are 7.852 hours and 0.25 mag, respectively. The value of a/b for (147), from a preliminary estimation, is not less than 1.26:1.     

裂缝诱导HTI双孔隙介质中的裂缝参数分析

裂缝诱导HTI双孔隙介质模型是将一组垂直排列的裂缝系统嵌入到统计各向同性的孔隙岩石基质系统中而建立的.为了研究裂缝参数对地震波在该模型中传播规律的影响,本文分别对裂缝弱度、裂缝孔隙度和裂缝渗透率这三个主要的裂缝参数进行了分析研究.数值结果表明,裂缝诱导HTI双孔隙介质中,裂缝弱度越大,介质的各向异性强度越强;与基质孔隙系统相比,裂缝系统孔隙度对介质等效孔隙度的影响很小,而裂缝系统渗透率的增大则将显著提高介质在裂缝发育方向上的等效渗透率,这符合对裂缝系统"低孔"、"高渗"特性的认识.此外,裂缝系统渗透率的增大也使慢纵波的振幅显著增强.     

库车坳陷复杂高陡构造地震成像研究

复杂构造地震成像主要取决于叠前地震数据品质、偏移速度可靠性和偏移算子成像精度. 库车坳陷异常复杂的近地表条件导致极低信噪比的地震采集数据. 该区逆冲推覆高陡构造刺穿盐体大面积分布, 盐层厚度变化大、顶底面形态复杂, 盐下断裂带破碎、小断块发育, 形成异常复杂的地震成像问题. 本文重点研究三个关键环节:(1)精细的叠前地震预处理研究: 根据该区地震地质复杂性和地震资料特征, 采用一些新的方法技术和技术组合从振幅与时移的大、中、小尺度变化三个层次来解决资料信噪比问题, 重建深部反射信号; (2)三级偏移速度分析研究:利用库车坳陷盐刺穿逆冲推覆构造建模理论及变速成图配套技术解决叠前时间偏移速度场时深转换问题,利用井约束低频速度地震迭代反演技术解决连井层速度场与偏移速度场的融合问题,实现从DMO速度分析、叠前时间偏移速度分析到叠前深度偏移速度分析的有机衔接,建立拓扑结构相对保持的叠前深度偏移速度模型;(3)基于退化Fourier偏移算子的半解析波动方程叠前时间和深度偏移研究, 极大地改善了地震偏移过程中高波数波的成像问题. 通过对库车坳陷大北、博孜、却勒、西秋4和西秋10等复杂高陡构造的叠前时间和深度偏移地震成像处理,取得了较好的应用效果.     

Approximate Solutions to the Boundary–Volume Integral Equation for Wave Propagation in Piecewise Heterogeneous Media

Piecewise heterogeneous media that the earth presents are composed of large-scale boundary structures and small-scale volume heterogeneities. Wave propagation in such piecewise heterogeneous media can be accurately superposed through the generalized Lippmann–Schwinger integral equation (GLSIE). Two different Born series modeling schemes are formulated for the boundary–volume integral equation with 2-D antiplane motion (SH waves). Both schemes decompose the resulting boundary–volume integral equation matrix into two parts: the self-interaction operator handled with a fully implicit manner, and the extrapolation operator approximated by a Born series. The first scheme associates the self-interaction operator with each boundary itself and the volume itself, and interprets the extrapolation operator as the cross-interaction between each boundary and other boundaries/volume scatterers in a subregion. The second scheme relates the self-interaction operator to each boundary itself and its cross-interaction with the volume scatterers on both sides, and expresses the extrapolation operator as both the direct and indirect (through the volume scatterers) cross-interactions between different boundaries in a subregion. By eliminating the displacement field from the volume scatterers, the second scheme reduces the dimension of the resulting boundary-volume integral equation matrix, leading to a faster convergence than the first scheme. Both the numerical schemes are validated by dimensionless frequency responses to a heterogeneous alluvial valley with the velocity perturbed randomly in the range of ca 5–20 %. The schemes are applied to wave propagation simulation in a heterogeneous multilayered model by calculating synthetic seismograms. Numerical experiments, compared with the full-waveform numerical solution, indicate that the Born series modeling schemes significantly improve computational efficiency, especially for high frequencies.     

基于相位编码的Fourier变换波动方程三维地震照明分析

复杂构造勘探是当前地震勘探的主要目标,提高深层信噪比和分辨率十分重要.地震照明分析是研究地震波能量在复杂构造中传播的有效手段,可指导观测系统设计进而提高野外数据采集和最终成像质量.本文发展了基于三维单程波动方程的地震照明方法,采用相位编码合成平面波源,一阶分离变量Fourier算子进行波场传播.阐述了照明和深度偏移之间...     

复杂地表边界元-体积元波动方程数值模拟

复杂近地表引起来自深部构造的地震反射信号振幅和相位的异常变化,是影响复杂近地表地区地震资料品质的主要原因.本文采用边界元-体积元方法,通过求解含复杂地表的波动积分方程,来模拟地震波在复杂近地表构造中的传播.其中,边界元法模拟地形起伏和表层地质结构对地震波传播的影响;体积元法模拟起伏地表下非均质低降速层的影响.与其他数值...     

高分辨率非线性储层物性参数反演方法和应用

对于陆相沉积环境下的复杂隐蔽岩性储层,由于观测信息不准确,如信息重叠、信息缺失和噪音污染,以及岩石物理关系模糊等原因,储层横向预测存在不惟一性、不稳定性和不确定性.基于线性假定的常规储层横向预测技术已不适用于复杂隐蔽岩性储层的勘探.本文采用一种非线性储层岩性物性褶积模型,建立波阻抗与孔隙度/泥质含量的函数关系;通过多级结构分解和双向边沿子波检测来刻画复杂岩石物理关系;通过Caianiello褶积神经网络实现确定性反演、统计反演和非线性理论三者有机结合;最后联合应用基于逆算子的反演方法和基于正算子的重建算法实现了综合地质、测井和地震波阻抗信息进行高分辨率储层物性参数反演.非线性储层物性参数反演采用多井约束机制和分频反演方式,在陆相和近海油气勘探资料的实际应用中,取得了明显应用效果.     

复杂构造三维地震观测系统设计的共聚焦分辨率分析

三维地震观测系统共聚焦分辨率特性分析突破传统以点论证为基础的观测系统分辨率分析方法,面向地质目标定量预测三维观测系统地震成像的空间分辨率和振幅精度.基于Fourier有限差分（FFD）大步长波场延拓和Born-Kirchhoff小步长波场插值递推方法,本文介绍了一种复杂介质条件下三维地震观测系统共聚焦分辨率特性快速分析方法.对给定的速度模型,该方法能够分析拟采用的三维地震观测系统设计方案对复杂构造的成像分辨率与AVP属性,从而为进一步的偏移成像与储层分析提供保证.最后本文以SEG/EAGE三维盐丘模型为例设计满覆盖为16次的三维地震观测系统,并实施三维共聚焦分辨率特性分析.