A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

The carbohydrates in relation to mineralogic and granulometric composition of surface sediments in the karst estuary (River Krka estuary,Yugoslavia)

The investigation of mineral, granulometric and chemical composition of sediments of the River Krka estuary (Yugoslavia) were performed in order to elucidate the origin of the sediments and the pattern of sedimentation. Estuarine surface sediments were found to be fine-grained with a bimodal distribution. Environmental conditions in estuarine sediments favour conservation of the organic matter (anoxic conditions). The carbohydrates in the sediments were investigated to determine whether they are of terrigenous or authigenous origin. Glucose, galactose, mannose, xylose, rhamnose, glucosamine and glucuronic acid were detected in the sediments. Their mutual relationship indicates a preferentially terrigenous source of sedimented organic material in estuarine sediments.     

Basic phase relations of polybaric batch, percolative and critical melting

Summary ?Partial melting of the mantle is polybaric which implies that the phase relations change during partial melting. In addition to the pressure the composition of the melt depends on the melting mode. Various melting models have been suggested. Here the basic phase relations of polybaric batch, percolative, and critical melting are considered, using a simple ternary system. The percolative melts are in equilibrium with their residua, but differ somewhat in composition from those of batch melting. Critical melting is a fractional type of melting where the residuum contain interstitial melt. The critical melts differ in composition from batch melts. The linear trends of peridotites from ophiolites show that the extracted melts had nearly constant compositions, and therefore were extracted within a small pressure interval. A comparison between the trends of mantle peridotite and experimental batch melts suggests strongly that the melt extracted from the peridotites are in equilibrium with their residua. This could suggest that either batch or percolative melting are relevant melting modes for the mantle. However, isotopic disequilibria favor instead a critical mode of melting. This inconsistency can be avoided if the ascending melts are accumulated within a source region and equilibrate with the residuum before the melt is extracted from the source region. The evidence for equilibrium suggests that multisaturation of tholeiitic compositions in PT-diagrams is relevant for estimating pressure and temperature of generation of primary tholeiitic magmas. Received September 2, 2001; revised version accepted March 20, 2002     

Sediment flux from a fjord during glacial periods, Isfjorden, Spitsbergen

Sediment has accumulated in Isfjorden, a deep fjord in Spitsbergen, at a rate of 1.7 km³/k.y. during the past 13 k.y. Between 200 ka and 13 ka the fjord was free of ice for 120 k.y. Assuming a similar sediment delivery rate during this ice-free time, 200 km³ of sediment would have accumulated in the fjord. An alternative calculation based on erosion rates suggests that 400 km³ could have been delivered to Isfjorden during this 120 k.y.Seismic studies have identified a 330 km³ package of sediment on the continental shelf and slope west of Isfjorden. This sediment is believed to have accumulated between 200 ka and 13 ka. Herein we argue that this is sediment that was originally deposited in the fjord, and that it was transferred to the shelf by glaciers in the 70 ka during which the fjord was occupied by ice. Calculations using a steady-state numerical model suggest that the sediment could have been moved in a deforming layer of subglacial till and in subglacial melt streams at rates of 7.6 × 10⁶ m³ a⁻¹ and 0.3 × 10⁶ m³ a⁻¹, respectively, resulting in a total flux of 7.9 × 10⁶ m³ a⁻¹. It is unlikely that much sediment was moved in a basal layer of dirty ice, as intense basal melting would have inhibited sediment entrainment.Of the time that glaciers occupied the fjord, 60% would have been required to evacuate the accumulated sediment. During the remaining time, the ice could have been deepening the fjord.     

What controls dead-ice melting under different climate conditions? A discussion

In the geological record, hummocky dead-ice moraines represent the final product of the melt-out of dead-ice. Processes and rates of dead-ice melting in ice-cored moraines and at debris-covered glaciers are commonly believed to be governed by climate and debris-cover properties. Here, backwasting rates from 14 dead-ice areas are assessed in relation to mean annual air temperature, mean summer air temperature, mean annual precipitation, mean summer precipitation, and annual sum of positive degree days. The highest correlation was found between backwasting rate and mean annual air temperature. However, the correlation between melt rates and climate parameters is low, stressing that processes and topography play a major role in governing the rates of backwasting. The rates of backwasting from modern glacial environments should serve as input to de-icing models for ancient dead-ice areas in order to assess the mode and duration of deposition.A challenge for future explorations of dead-ice environments is to obtain long-term records of field-based monitoring of melt progression. Furthermore, many modern satellite-borne sensors have high potentials for recordings of multi-temporal Digital Elevation Models (DEMs) for detection and quantification of changes in dead-ice environments. In recent years, high-accuracy DEMs from airborne laser scanning altimetry (LiDAR) are emerging as an additional data source. However, time series of high-resolution aerial photographs remain essential for both visual inspection and high-resolution stereographic DEM production.     

Biomarker distributions as indicators for the depositional environment of lacustrine sediments in the Valjevo-Mionica basin (Serbia)

In this study, the molecular composition and biomarker distribution of lacustrine sediments from Val-1 drillhole in the central zone of the western part of the Valjevo-Mionica basin were investigated at depth interval of 0–400 m. Former investigations have shown that the core material can be separated into six depth intervals based on bulk geochemical, mineralogical and sedimentological characteristics. Concerning the quality of organic matter, presence of specific minerals, and high salinity and anoxicity, or alkalinity, three zones are of highest interest, defined at depth intervals of 15–75 m (A), 75–200 m (B) and 360–400 m (F). The first aim of the study was to identify which biomarkers characterize these specific intervals. The second aim, addressing the transitions zones of these intervals, was to extend the changes in the characteristics of the organic substance, to reflect the changes of conditions in the depositional environment as well as to define biomarker parameters which are the most sensitive sedimentological indicators.The sediments from the hypersaline anoxic and alkaline environment show high contribution of algal precursor biomass, what is in accordance with the good quality of organic substances in the sediments from these zones. High squalane content and low content of regular isoprenoid C₂₅ are typical for hypersaline anoxic environment, whereas sediments from alkaline environment have high regular isoprenoid C₂₅ content.Transition to specific sedimentation zones is characterized by change in total organic matter content, and of both free and pyrolysis-derived, and change in hydrogen index value. In the biomarker distributions, more significant changes were detected in distributions of n-alkanes and isoprenoids, compared to polycyclic alkanes. The most intensive changes in alkane distribution are reflected in changes in n-C₁₇ content compared to n-C₂₇, and phytane compared to n-C₁₈. In addition, significant sensitivity was seen in ratios between squalane and n-alkane C₂₆ (hypersaline depositional environment), or isoprenoid C₂₅ and n-alkane C₂₂ for high alkalinity environment.This study showed that Sq/n-C₂₆ ratio can be used to assess the quality of organic substance in immature lacustrine sediments.