A simple shaker table for seismometer calibration

A unique and simple shaker table (shake table or shaking table), designed, constructed, and installed at the Hawaii Institute of Geophysics, has proven to be a valuable aid in testing and calibrating short period seismometers, as well as ocean bottom and ocean sub-bottom seismometer/tilt meter packages. It consists of a platform suspended in a stairwell by a single elastic cord (10 m extended length) driven by GeoSpace HS-10 geophones. Platform motion is monitored by orthogonal reference geophones and tilt meters. The relatively low natural periods of the platform, about 1.9 sec vertical and 6.5 sec horizontal, provide sufficient isolation from local vibrations that calibration can be made near operational amplitudes. Vertical or horizontal driver geophones can be driven by a commercial signal generator or white noise generator, or from magnetic tape output. The table can also be tilted with respect to the drivers to determine tilt tolerances and to calibrate tilt meters. A Hewlett-Packard 3582-A spectrum analyzer, used to analyze both reference and output signals, provides near real-time system cabibration and is an efficient means for investigating parasitic system resonances. The analyzer can also provide a white noise signal source to the driver geophones.Hawaii Institute of Geophysics Contribution 1443.     

Distributions of dissolved and particulate biogenic thiols in the subartic Pacific Ocean

Dissolved and particulate concentrations of the biogenic thiols cysteine (Cys), arginine–cysteine (Arg–Cys), glutamine–cysteine (Gln–Cys), γ-glutamate–cysteine (γ-Glu–Cys) and glutathione (GSH) were measured in the subartic Pacific Ocean in the summer of 2003 using high performance liquid chromatography (HPLC) with precolumn derivatization as reported in previous work. In this study, a preconcentration protocol for the derivatized thiols was utilized to extend detection limits of dissolved thiols to picomolar levels. The measured concentrations of particulate and dissolved thiols were uncoupled, with distinctive depth profiles and large differences in the particulate to dissolved ratios between individual compounds. Glutathione was the most abundant particulate thiol whereas the most abundant dissolved thiol was γ-Glu–Cys, with concentrations as high as 15 nM. Given the relatively small pool of intracellular γ-Glu–Cys and the very low dissolved concentrations of GSH, we hypothesize that glutathione released from cells is rapidly converted to the potentially degradation resistant γ-Glu–Cys outside the cell. The relatively high concentrations of other dissolved thiols compared to particulate concentrations implies both biological exudation and slow degradation rates. Some thiols appear to vary with changes in nutrient availability but this effect is difficult to decouple from changes in community structure inferred from pigment analyses. Dissolved thiol concentrations also exceed typical metal concentrations in the subartic Pacific, supporting previous arguments that they may be important in metal speciation.     

SeagrassNet monitoring across the Americas: case studies of seagrass decline

Seagrasses are an important coastal habitat worldwide and are indicative of environmental health at the critical land–sea interface. In many parts of the world, seagrasses are not well known, although they provide crucial functions and values to the world's oceans and to human populations dwelling along the coast. Established in 2001, SeagrassNet, a monitoring program for seagrasses worldwide, uses a standardized protocol for detecting change in seagrass habitat to capture both seagrass parameters and environmental variables. SeagrassNet is designed to statistically detect change over a relatively short time frame (1–2 years) through quarterly monitoring of permanent plots. Currently, SeagrassNet operates in 18 countries at 48 sites; at each site, a permanent transect is established and a team of people from the area collects data which is sent to the SeagrassNet database for analysis. We present five case studies based on SeagrassNet data from across the Americas (two sites in the USA, one in Belize, and two in Brazil) which have a common theme of seagrass decline; the study represents a first latitudinal comparison across a hemisphere using a common methodology. In two cases, rapid loss of seagrass was related to eutrophication, in two cases losses related to climate change, and in one case, the loss is attributed to a complex trophic interaction resulting from the presence of a marine protected area. SeagrassNet results provide documentation of seagrass change over time and allow us to make scientifically supported statements about the status of seagrass habitat and the extent of need for management action.     

The partial molar volume, thermal expansivity, and compressibility of H2O in NaAlSi3O8 liquid: new measurements and an internally consistent model

The molar volumes of 19 hydrous albitic liquids (1.9 to 6.1 wt% H₂O^total) were determined at one bar and 505–765 K. These volume data were derived from density measurements on hydrous glasses at 298 K, followed by measurements of the thermal expansion of each glass from 298 K to its respective glass transition temperature. The technique exploits the fact that the volume of a glass is equal to that of the corresponding liquid at the limiting fictive temperature (T _f′), and that T _f′ can be approximated as the temperature near the onset of the rapid increase in thermal expansion that occurs in the glass transition interval. The volume data of this study were combined with available volume data for anhydrous, Na₂O-Al₂O₃-SiO₂ liquids to derive the partial molar volume (±1) of the H₂O component in an albitic melt at ∼565 K and one bar. To extend the determination of to higher temperatures and pressures, the molar volumes of the hydrous albitic liquids determined in this study were combined with those measured by previous authors at 1023–1223 K and 480–840 MPa, leading to the following fitted values (±1) at 1673 K and one bar: (±0.46)×10⁻³ cm⁻³/mol-K, and dVˉ ^H ₂ ^{O total} /dP=−3.82 (±0.36)×10⁻⁴ cm³/mol-bar. The measured molar volumes of this study and those of previous authors can be recovered with a standard deviation of 0.5%, which is within the respective experimental errors. There is a significant difference between the values for derived in this study as a function of temperature and pressure and those obtained from an existing polynomial, primarily caused by the previous absence of accurate density measurements on anhydrous silicate liquids. The coefficients of thermal expansion (=4.72×10⁻⁴/K) and isothermal compressibility ( _T =1.66×10⁻⁵/bar) for the H₂O component at 1273 K and 100 MPa, indicate that H₂O^total is the single most expansive and compressible component in silicate liquids. For example, at 1473 K and 70 MPa (conditions of a mid-ocean ridge crustal magma chamber), the presence of just 0.4 wt% H₂O will decrease the density of a basaltic liquid by more than one percent. An equivalent decrease in melt density could be achieved by increasing the temperature by 175 degrees or the decreasing pressure by 230 MPa. Therefore, even minor quantities of dissolved water will have a marked effect on the dynamic properties of silicate liquids in the crustal environment. Received: 20 August 1996 / Accepted: 15 March 1997     

Fe57 Mossbauer spectroscopy of the Leoville meteorite

The Mossbauer spectra has been measured for the Leoville meteorite. Experimental results identify it as a type III carbonaceous meteorite. The spectrum shows the principle iron components to be olivine, magnetite, metallic iron, troilite and phyllosilicate material.     

Interpreting tracer breakthrough tailing in a conduit-dominated karstic aquifer

Breakthrough tailing has been observed during dye-tracing recovery tests in the Norville aquifer system (chalk), France. Karst-conduit flow and transport parameters were assessed using two different interpretative methods: the linear graphical method and the Chatwin method (implemented in the Qtracer2 program). The linear graphical method was used to model the observed tailing effects, which was explained by a second smaller delayed breakthrough curve. By comparing the results of tracer-test interpretation for the two methods, it was possible to relate the area of this second curve to the importance of turbulent flow in spring discharge. The more turbulent the flow, the less important the contribution of the second breakthrough curve and the tailing effect. The observed tailing could possibly be controlled by hydrodynamics to a greater extent than usually expected, the tailing effects being mostly attributed to diffusion phenomena. Tailing effects were expected to increase with discharge and the piezometric level, which would have resulted in overpressure in conduits, fissure flooding, etc. Instead, breakthrough tailing tended to disappear with increasing aquifer discharge, which would support the hypothesis of there being mostly hydrodynamic-controlled tailing effects instead of matrix- or fissure-diffusion.An erratum to this article can be found at     

An estuarine benthic index of biotic integrity for the Mid-Atlantic region of the United States. II. Index development

A benthic index of biotic integrity was developed for use in estuaries of the mid-Atlantic region of the United States (Delaware Bay estuary through Albemarle-Pamlico Sound). The index was developed for the Mid-Atlantic Integrated Assessment Program (MAIA) of the U.S. Environmental Protection Agency using procedures similar to those applied previously in Chesapeake Bay and southeastern estuaries, and was based on sampling in July through early October. Data from seven federal and state sampling programs were used to categorize sites as degraded or non-degraded based on dissolved oxygen, sediment contaminant, and sediment toxicity criteria. Various metrics of benthic community structure and function that distinguished between degraded and reference (non-degraded) sites were selected for each of five major habitat types defined by classification analysis of assemblages. Each metric was scored according to thresholds established on the distribution of values at reference sites, so that sites with low scoring metrics would be expected to show signs of degradation. For each habitat, metrics that correctly classified at least 50% of the degraded sites in the calibration data set were selected whenever possible to derive the index. The final index integrated the average score of the combination of metrics that performed best according to several criteria. Selected metrics included measures of productivity (abundance), diversity (number of taxa, Shannon-Wiener diversity, percent dominance), species composition and life history (percent abundance of pollution-indicative taxa, percent abundance of pollution-sensitive taxa, percent abundance of Bivalvia, Tanypodinae-Chironomidae abundance ratio), and trophic composition (percent abundance of deep-deposit feeders). The index correctly classified 82% of all sites in an independent data set. Classification efficiencies of sites were higher in the mesohaline and polyhaline habitats (81–92%) than in the oligohaline (71%) and the tidal freshwater (61%). Although application of the index to low salinity habitats should be done with caution, the MAIA index appeared to be quite reliable with a high likelihood of correctly identifying both degraded and non-degraded conditions. The index is expected to be of great utility in regional assessments as a tool for evaluating the integrity of benthic assemblages and tracking their condition over time.     

Water Resources Planning and Climate Change Assessment Methods

This paper, which provides background for other papers in the volume, first reviews the nature and development of water resources planning and evaluation criteria at the Federal level in the United States. These criteria constitute a highly developed, complex set of guidelines for project planning and evaluation. The level of development of these criteria and their long historical development from theoretical foundations must be taken into account in relating global climate change to possible changes in planning criteria. Second, the essentials of water project planning and evaluation, including benefit-cost principles and more complex concepts of social decision-making, are outlined. Third, the paper provides an overview of global climate change assessment methods, including impact assessment and integrated assessment. Impact assessment uses a relatively straightforward comparison of with and without situations; integrated assessment attempts to improve on impact assessment by developing more complex models that incorporate a range of feedbacks and interrelationships.