Optical properties of solid and liquid sulfur at visible and infrared wavelengths

Knowledge of the optical constants of elemental sulfur has potential applications to Venus, Jupiter, Io, Amalthea, and the Earth. The real part, n, of the index of refraction of liquid sulfur (at 133°C) and of solid orthorhombic sulfur (at 25°C) for the wavelength range 0.4–2.0 μm were measured ellipsometrically. The imaginary part, k, of the refractive index of liquid sulfur was obtained by transmittance measurements at the same temperature and wavelength range. The reflectance of semi-infinite slabs of solid and liquid sulfur is calculated using the measured n and k values. We confirm that sulfur melts on Io would be classified as “black” by the Voyager imaging system.     

Filtration and Clogging Behavior of Geotextiles with Roorkee Soils

Geotextile filters are rapidly replacing graded granular filters as the standard of practice in geotechnical design. The objective of the present study is to predict the behavior of the geotextile filter for the locally (Roorkee—India) available soils using three different geotextiles (two nonwoven and one woven). Nonwoven geotextiles are commonly used in filtration applications. This paper evaluates the long-term performance of two needle-punched nonwoven geotextiles and one woven geotextile. Filtration tests on soil–geotextile filter systems were conducted in the laboratory in order to evaluate the filtration and clogging behavior. Laboratory test program, include evaluation of performance of two different nonwoven and one woven geotextile filters in combination with locally available Solani River Sand and Clayey Soil. The paper describes the concept and details of the Fine Fraction Filtration (F³) test and presents data on three different geotextiles, which were evaluated using three different soil types. It is deduced that in all filtration applications, the non-woven geotextile would perform better than the woven geotextile.     

Significance of correspondence between river discharge and proloculus size of benthic Foraminifera in paleomonsoonal studies

Variations in the mean proloculus size (MPS) of the benthic foraminiferal speciesRotalidium annectens were studied in a core collected off Karwar (20 m water depth), on the west coast of India. Comparison of downcore variations in the MPS with rainfall (five-year average) over a period of 100 years from the catchment area of the Kali River shows a direct correlation. This implies that higher MPS values indicate high rainfall over the catchment area and thus confirms the earlier hypothesis that the MPS is inversely related to salinity. The correspondence between MPS and rainfall shows a high potential in generating proximity data for the reconstruction of a paleo-precipitational history.     

Application of soft computing techniques for shallow foundation reliability in geotechnical engineering

This research focuses on the application of three soft computing techniques including Minimax Probability Machine Regression(MPMR),Particle Swarm Optimization based Artificial Neural Network(ANN-PSO)and Particle Swarm Optimization based Adaptive Network Fuzzy Inference System(ANFIS-PSO)to study the shallow foundation reliability based on settlement criteria.Soil is a heterogeneous medium and the involvement of its attributes for geotechnical behaviour in soil-foundation system makes the prediction of settlement of shallow a complex engineering problem.This study explores the feasibility of soft computing techniques against the deterministic approach.The settlement of shallow foundation depends on the parametersγ(unit weight),e0(void ratio)and CC(compression index).These soil parameters are taken as input variables while the settlement of shallow foundation as output.To assess the performance of models,different performance indices i.e.RMSE,VAF,R^2,Bias Factor,MAPE,LMI,U(95),RSR,NS,RPD,etc.were used.From the analysis of results,it was found that MPMR model outperformed PSO-ANFIS and PSO-ANN.Therefore,MPMR can be used as a reliable soft computing technique for non-linear problems for settlement of shallow foundations on soils.     

Evidence for the thrust emplacement of the ‘Lesser Himalaya’ Chur granite,Himachal Pradesh

Numerous peraluminous and porphyritic granitic bodies and augen gneisses of granitic compositions occur in the nappe sequences of the Lower Himalaya. They are Proterozoic-to-lower Paleozoic in age and have been grouped into the ‘Lesser Himalaya granite belt’. The mode of emplacement and tectonic significance of these granites are as yet uncertain but they are generally considered to be sheet-like intrusions into the surrounding rocks. The small and isolated granite body (the Chur granite) that crops out around the Chur peak in the Himachal Himalaya is one of the more famous of these granites. Several lines of evidence have been adduced to show that the Chur granite has a thrust (the Chur thrust) contact with the underlying metasedimentary sequence (locally called the Jutogh Group). The Chur granite with restricted occurrence at the highest topographic and structural levels represents an erosional remnant of a much larger sub-horizontal thrust sheet. The contact relations between the country rocks and many of the other granite and granitic augen gneisses in the Lesser Himalaya belt are apparently similar to that of the Chur granite suggesting that at least some of them may also represent thrust sheets.     

Using spatial statistics to identify the uranium hotspot in groundwater in the mid-eastern Gangetic plain,India

The occurrence of uranium in groundwater is of particular interest due to its toxicological and radiological properties. It has been considered as a relevant contaminant for drinking water even at a low concentration. Uranium is a ubiquitously occurring radionuclide in the environment. Four hundred and fifty-six (456) groundwater samples from different locations of five districts of South Bihar (SB) were collected and concentrations of uranium (U) were analyzed using a light-emitting diode (LED) fluorimetric technique. Uranium concentrations in groundwater samples varied from 0.1 µg l^?1 to 238.2 µg l^?1 with an average value of 12.3 µg l^?1 in five districts of Bihar in the mid-eastern Gangetic plain. This study used hot spot spatial statistics to identify the distribution of elevated uranium concentration in groundwater. The hypothesis whether spatial distribution of high value and low value of U is more likely spatially clustered due to random process near a uranium hotspot in groundwater was tested based on z score and Getis-Ord Gi* statistics. The method implemented in this study, can be utilized in the field of risk assessment and decision making to locate potential areas of contamination.     

A comparative study of soil erosion modelling by MMF,USLE and RUSLE

The quantitative assessment of spatial soil erosion is valuable information to control the erosion. The study area in a part of Narmada river in central India is selected. The main objective is to assess and compare the results obtained from three soil erosion models using GIS platform. Variation in the rate of erosion of the three models is compared considering varying slope, soil and land use of the area. Three models selected are Morgan–Morgan–Finney (MMF), Universal Soil Loss Equation (USLE) and Revised Universal Soil Loss Equation (RUSLE). The best fit or the most reliable model for the study area is selected after validation with the observed sedimentation data. The results give –39.45%, –9.60% and 4.80% difference in the values of sedimentation by MMF, USLE and RUSLE, respectively, from the observed data. Finally, RUSLE model has been found to be most reliable for the study area.     

Integrated approach for demarcating the fracture zone for well site location : A case study near Gumla and Lohardaga,Bihar

In recent years satellite remote sensing techniques have greatly aided identification of fractures/joints/faults in connection with groundwater exploration. However, due to some constraints in filtering out the type of fracture i.e. shear fracture, tensional fracture, mineralised fracture etc. as to their “open or closed” nature from groundwater aspects, there is need of adding geophysical survey, particularly resistivity survey to further enhance the accuracy, and hence minimise drilling failures. The area under study is a part of Ranchi plateau and lithologically comprising of granite-gneiss. The present paper lays stress on an integrated approach for localising well sites through satellite data analysis and resistivity profiling along with vertical electrical sounding which is based on fracture patterns. With this combined effort i.e. firstly considering the surfacial features like drainage, geomorpho-logy, lithology and lineaments, and secondly taking into account geophysical survey aspects, i.e. depth and thickness of fracture zone, lateral extent, different layer parameter, etc., fairly accurate results are achieved. In the presnt study this type of an integrated survey has been carried out in Lohardaga and Gumla districts in Bihar, the results of which are highlighted in the paper.