Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Fast genetic mapping in barley: case studies of cuticle mutants using RNA-sequencing

Barley(Hordeum vulgare L.) is one of the earliest domesticated crop species and ranked as the fourth largest cereal production worldwide. Forward genetic studies in barley have greatly advanced plant genetics during the last century; however, most genes are identified by the conventional mapping method. Array genotyping and exome-capture sequencing have also been successfully used to target the causal mutation in barley populations, but these techniques are not widely adopted because of associated costs and partly due to the huge genome size of barley. This review summarizes three mapping cases of barley cuticle mutants in our laboratory with the help of RNA-sequencing. The causal mutations have been successfully identified for two of them and the target genes are located in the pericentromeric regions. Detailed information on the mapping-by-sequencing, mapping-and-sequencing, and RNA-sequencing assisted linkage mapping are presented and some limitations and challenges on the mapping assisted by RNA sequencing are also discussed. The alternative and elegant methods presented in this review may greatly accelerate forward genetics of barley mapping, especially for laboratories without large funding.     

SDSS J143030.22-001115.1： A Misclassified Narrow-line Seyfert 1 Galaxy with Flat X-ray Spectrum

We used multi-component profiles to model the Hβ and [OⅢ]λλ4959,5007 lines of SDSS J143030.22-001115.1, a narrow-line Seyfert 1 galaxy (NLS1) in a sample of 150 NLS1 candidates selected from the Sloan Digital Sky Survey (SDSS), Early Data Release (EDR). After subtracting the Hβ contribution from narrow line regions (NLRs), we found that its full width half maximum (FWHM) of broad Hβ line is nearly 2900km s~(-1) , significantly larger than the customarily adopted criterion of 2000 km s~(-1) . With its weak Fe Ⅱ multiples, we believe that SDSS J143030.22-001115.1 should not be classified as a genuine NLS1. When we calculate the virial black hole masses of NLS1s, we should use the Hβ linewidth after subtracting the NLR component.     

应用ATA的对数周期馈源方案于FAST的可能性探讨

介绍应用于美国凤凰计划的Allen望远镜阵(ATA)的对数周期馈源(LPA)概况，初步给出此种馈源的基本参数及性能，仿真估算了其驻波比和方向图，并结合正在进行中的我国500m孔径球面射电望远镜(FAST)计划，探讨了应用这种宽带馈源的可能性及其限制。     

Multistep matched-field inversion for broad-band data from ASIAEX2001

This paper discusses the results of geoacoustic inversion carried out using explosive charge data from the Asian Seas International Acoustic Experiment (ASIAEX) East China Sea (ECS) Experiment. A multifrequency incoherent matched-field inversion processor and a genetic algorithm (GA) are used for the inversion. A multistep matched field inversion approach is presented, which makes use of the varying sensitivities of wave fields at various frequencies to reduce the inversion problem into a sequence of smaller inversions with fewer unknowns to estimate at each stage. Different parameters are estimated using data at different frequencies according to their sensitivities. Inversion results for different areas in the ECS region are summarized and compared with core data.     

Theory of stability, and regulation and control of ecological system in oasis

Starting with analysis on the evolving course of oasis and the characteristics and evolution of transitional zone between oasis and desert, in consideration of ecological elements including plant stomata resistance, area covered by vegetation, and physical elements including albedo of vegetation and bare soil, atmosphere temperature, and humidity, under the condition of the balance among net radiation flux, latent heat flux, and sensible heat flux, the following are calculated: temperatures of vegetation and bare soil in different conditions, as well as the evapotranspiration rate of ecosystem. Analysis on evapotranspiration rate indicates that it depends on both the climate of environment and the physiological and ecological conditions of plants. On certain conditions, the evapotranspiration rate of transitional zone between oasis and desert (i.e. area covered by vegetation less than 20%), in some parameter domains, appears in bifurcation or multiequilibrium state. Meanwhile, in such area, ecosystem is extremely unstable. Any minor change to the balance will cause either increase or reduction of area covered by vegetation in ecosystem, on the basis of discussion on the emergency of these phenomena. This paper is attempting to propose an effective way of destruction and rebuilt ecosystem in transitional zone. The way is to control the evaporation of plant through selecting anti-drought country plant with big stomata resistance, and modify the roughness of the underlying surface in ecosystem by establishing rational interspace structure of plant community, so as to put the degenerative ecosystem into the natural succession track. This primary theory is being verified through observation and analysis on historical data.     

等离子体质谱法测定玄武岩中微量元素三种样品预处理方法的比较

在测定玄武岩的微量元素时,为了保证得到的微量元素结果反映源区特征,需经预处理去除玄武岩的孔洞中充填的碳酸盐等物质。选取雷州半岛新生代玄武岩三个样品,每一个样品用三种预处理方法进行预处理,等离子体质谱法测定其中的微量元素。分析结果表明,用稀硝酸浸泡样品,会导致玄武岩中大多数微量元素严重丢失,得到的数据失真;而用稀盐酸浸泡去除碳酸盐的方法基本不改变玄武岩中微量元素的含量。     

Zircon U–Pb and Hf isotopic study of gneissic rocks from the Chinese Altai: Progressive accretionary history in the early to middle Palaeozoic

Gneissic rocks in the Chinese Altai Mountains have been interpreted as either Paleozoic metasedimentary rocks or Precambrian basement. This study reports geochemical and geochronological data for banded paragneisses and associated gneissic granitoids collected along a NE–SW traverse in the northwestern Chinese Altai. Petrological and geochemical data suggest that the protoliths of the banded gneisses were possibly immature sediments with significant volcanic input and that the gneissic granitoids were derived from I-type granites formed in a subduction environment. Three types of morphological features can be recognized in zircons from the banded gneisses and are interpreted to correlate with different sources. Zircons from five samples of banded paragneiss cluster predominantly between 466 and 528 Ma, some give Neoproterozoic ages, and a few yield discordant Paleoproterozoic to Archean ages. Zircon Hf isotopic compositions indicate that both juvenile/mantle and crust materials were involved in the generation of the source rocks from which these zircons were derived. In contrast, zircons occur ubiquitously as elongated euhedral prismatic crystals in the four samples of the gneissic granitoids, and define single populations for each sample with mean ages between 380 and 453 Ma. The general absence of Precambrian inheritance and positive zircon ?Hf values for these granitoids suggest insignificant crustal contribution to the generation of the precursor magmas. Our data can be interpreted in terms of a progressive accretionary history in early to middle Palaeozoic times, and the Chinese Altai may possibly represent a magmatic arc built on a continental margin dominated by Neoproterozoic rocks.     

北疆阿尔泰南缘泥盆系浅变质碎屑沉积岩地球化学特征及其形成环境

对于北疆阿尔泰地区泥盆纪所处的大地构造环境,目前仍旧存在不同观点。前人基于阿尔泰南缘泥盆纪火山岩地球化学研究,分别提出了活动大陆边缘和被动大陆边缘裂谷等不同构造观点。阿尔泰造山带南缘的泥盆纪浅变质碎屑沉积岩地球化学研究表明,该套浅变质碎屑沉积岩原岩主要为泥质或砂质沉积岩。尽管不同岩性样品主量元素含量不同,但其化学蚀变指数(CIA)小于75,成分变异指数(ICV)接近或小于1.0,斜长石蚀变指数(PIA)平均70,说明其源区物质比较新鲜,成熟度相对较低,化学风化作用较弱。同样,不同岩性样品微量元素含量差别较大,但表生过程中不活泼的微量元素比值却比较一致,轻稀土(LREE)中度富集(La_N/Yb_N=2.88～9.90),重稀土(HREE)比较平坦,并伴有明显的Eu负异常(Eu/Eu~*= 0.45～0.89)。绝大多数样品具有高的La/Sc(1～3)、La/Y(0.5～1)和Ti/Zr(10～35),以及较低的Sc/Cr(0.1～0.3)比值,类似于大陆岛弧相关环境碎屑沉积物。在La-Th-Sc和Th-Sc-Zr/10构造环境判别图解中,除一千枚岩样品外,其他所有样品均落入大陆岛弧区。以上地球化学特征明显不同于大洋岛弧和被动陆缘沉积物,说明该套浅变质碎屑沉积岩可能沉积于活动大陆边缘的大陆岛弧相关环境,为认识阿尔泰造山带泥盆纪岛弧增生构造演化过程提供了一个重要证据。     

JD直连式深孔绳索取心钻杆的研制与应用

根据深部找矿的需要,立足于我国目前钻探设备现状和材料冶炼及机械加工水平,通过对钻杆选材、结构、制造工艺的创新,研制了一种两端镦粗后整体热处理再车螺纹的新型深孔绳索取心钻杆及配套钻具,经使用,效果达到了设计要求。