Microwave Type III Burst Group in the 1993 October 2 Flare

Microwave Type III bursts with positive frequency drifting rate were found by Stahli and Benz (1987) for first time. Type III events are especially interesting because they are well-known to be signatures of electron beams in coronal plasma, and they are effective means for diagnosting of source plasma. A microwave burst consisting of some microwave type III burst groups was registered at Beijing Astronomical Observatory with the 2545–2645–2840 MHz synchronous observing system. The distributions of frequency drifting rate, half power duration, and intensity for each impulse in the groups have been statistically analysed. From this analysis, some important parameters for the dynamic process in the flare are deduced and discussed.     

对地方电视台转播CCTV时延的测定

讲述了同步广播卫星电视时间信号的测量方法和测量结果，获得了CCTV1、CCTV2通过同一颗卫星（亚太－1A）转播的时延差值为16333μs，测量精度在10ns以内；CCTV2、CCTV4分别经两颗卫星（亚太－1A、亚洲－Ⅱ）转播，在陕西天文台卫星地面接收站时延差值为1644．20μs，精度为50μs，并分析了影响时延差值和精度的原因。同时测量了地方电视台转播亚太－1A的CCTV信号与直接接收亚太－1A的CCTV信号的时延差值，其测量精度为0．1μs。这些结果为利用同步广播卫星的电视信号进行高精度的时间服务提供了参考依据。     

基于J2EE架构的企业卡资源管理系统的设计与实现

介绍了J2EE架构和多层体系结构的发展，在B／S三层架构的基础上给出了包含应用服务器中间件的多层分布式应用体系结构，并把此体系结构应用于电信氽业的有价卡管理系统项目中。分析了此项同的功能结构和体系结构，采用J2EE开发平台和技术设计实现了由浏览器、Web服务器、应用服务器、数据库服务器组成的多层体系架构。     

A New Solar Radio Spectrometer at 1.10-2.06 GHz and First Observational Results

An improved Solar Radio Spectrometer working at 1.10-2.06 GHz with much improved spectral and temporal resolution, has been accomplished by the National Astronomical Observatories and Hebei Semiconductor Research Institute, based on an old spectrometer at 1-2 GHz. The new spectrometer has a spectral resolution of 4 MHz and a temporal resolution of 5ms, with an instantaneous detectable range from 0.02 to 10 times of the quiet Sun flux. It can measure both left and right circular polarization with an accuracy of 10% in degree of polarization. Some results of preliminary observations that could not be recorded by the old spectrometer at 1-2 GHz are presented.     

Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.     

On the microwave millisecond spike emission and its associated phenomena during the impulsive phase of large solar flare

We propose a model of two acceleration regions, which can explain, on the basis of microwave maser caused by a “hollow-beam” distribution of electrons, the presence of millisecond spikes in the event of 1981 May 16 and their absence in the event of 1981 October 12, and the enhanced continuous emission in the latter. We have also uncovered relations among the features, e.g. the Type III_G, Type IV_DCIM and hard x-ray bursts, that accompany the microwave millisecond spikes during the impulsive phase of a large flare.     

试论质量体系有效性的保持

提出了保持质量体系有效运行的前提和基础 ,关键和保证措施 ,并指出了组织企业保持质量体系持续有效的方法和途径。     

水下滑翔器主体外形优化设计

对水下滑翔器主体外形的优化设计问题进行研究.首先,在考虑内部机械结构限制的条件下,建立了主体外形优化数学模型,并采用CFX计算了若干主体形状的绕流阻力.在此基础上建立了映射主体外形的尺寸参数与绕流阻力的BP神经网络.然后将建立的神经网络作为优化设计问题的目标函数,采用坐标轮换法对滑翔器主体外形进行了优化设计,确定了尺寸参数的最优解.     

Infrared Study of T Tauri Stars Based on IRAS and 2MASS Observations

The IRAS and 2MASS associations for 193 T Tauri stars are identified in this paper. From the color–color diagrams and spectral index, it is found that the IR excesses for most samples are due to thermal emission from the circumstellar material, as suggested previously. It is also found that the IR excesses at IRAS region for few T Tauri stars and the near-IR excesses for some T Tauri stars are likely attributed to free-free emission or free-bound emission from the circumstellar ionized gas. Moreover, It is found in deredened J–H versus H–K color–color diagram that there is a slight separation in different spectral groups. The T Tauri stars locus equation in J–H versus H–K color–color diagram for our sample is also presented.     

SOHM-4与MHM-2010氢原子频标的特点比较

基于对已投入国家授时中心守时运转的SOHM-4型与MHM-2010型氢原子频标的长期关注,对这两种氢原子频标的性能作了较详细的比较和分析。讨论了它们共同的优点、各自的特长和不足之处,还给出了稳定度的测试结果。