Effect of core porosity on stability and run-up of breakwaters

The commonly used formulae like Hudson's [(1959), Laboratory investigations of rubblemound breakwaters. WES report, Vicksburg], Iribarren's or Vander meer's [(1988), Rockslopes and gravel beaches under wave attack. Ph.D. thesis, Delft University of Technology, The Netherlands], do not give us the design cross section of a rubblemound breakwater for varying core porosity values. The paper presents the results of the experimental study carried out to compute the effects of core porosity on the stability and run-up characteristics of rubblemound breakwaters. Regular waves were made to attack the structure, with different core porosity values in a normal direction. The porosity of the armour and the secondary layers was neglected. It was observed that as core porosity increased the stability also increased considerably within the limits of the experimental data values. This may be due to large inflow and energy dissipation within the core of the structure. The run-up on the rubblemound slope was found to decrease with the increase in the porosity for the same reason.     

Subject Index

Subject Index

Subject Index     

Lineaments and seismicity of Kerala — a remote sensing based analysis

Seismically active lineaments of Kerala State were identified by correlating the lineaments mapped using IRS LISS-I data with the earthquake occurrences. There are 31 earthquake incidences in Kerala since 1821, out of which 22 are falling on/close to 9 major lineaments/faults (length more than 20 km) indicating the possible correlation between lineaments/faults and earthquakes. It was observed that the earthquake occurrences are mostly associated with the NNW-SSE to NW-SE trending lineaments (6 out of 9 lineaments), which are considered to be formed sympathetic to the West Coast Fault. Hence, there is a need to monitor these seismically active lineaments using advanced techniques such as GPS, SAR Interferometry etc. for better understanding of the influence of these lineaments on the seismic activities of Kerala.     

Geochemistry of the Desur lavas,Deccan traps: Case study from the vicinity of Belgaum,Karnataka and their petrogenetic inferences

Geochemical characteristics of Desur-type basalt flows in the southern and southwestern part of Belgaum in Karnataka, India have been investigated to understand their petrogenesis. The basalts are compact, hard, massive, and show characteristic microporphyritic textures with abundant well-twinned and un-twinned plagioclase phenocrysts and minor clinopyroxene set in a fine-grained groundmass consisting of plagioclase, clinopyroxene, glass and Fe-Ti oxides. Thin sections show sub-ophitic, intergranular and intersertal textures. The basalts are Fe-rich tholeiites (13.4–13.8 wt %), characterized by high TiO₂ (3.64 to 3.94 wt %); moderate MgO contents (4.79 to 5.41 wt %), low K₂O contents (<0.58 wt %) and low Mg# (42.4–45.9). They are enriched in large ion lithophile elements, moderately enriched in the light rare earths (chondrite-normalized La_N/Yb_N 3.37–4.24), and exhibit nearly flat heavy rare-earth patterns that lack significant Eu anomalies (Eu/Eu* 0.86–1.10). Primitive-mantle-normalized element patterns for these rocks show characteristic troughs at K and Sr, absence of a Nb anomaly, and a low Zr/Nb ratio (<15), which suggest insignificant contamination by many types of continental crust, whereas, enrichments in the large ion lithophiles, La, P and Th could suggest enriched source characteristics. Based on the geochemical characteristics of the basalts, it is inferred that the Desur basalts representing the youngest flows of the Deccan Basalt Group are derived by partial melting of a peridotite source, and subsequent fractionation gave rise to the compositions of the basalts that are found in the Belgaum region.     

Recurring coronal holes and their rotation rates during the solar cycles 22–24

Coronal holes (CHs) play a significant role in making the Earth geo-magnetically active during the declining and minimum phases of the solar cycle. In this study, we analysed the evolutionary characteristics of the Recurring CHs from the year 1992 to 2016. The extended minimum of Solar Cycle 23 shows unusual characteristics in the number of persistent coronal holes in the mid- and low-latitude regions of the Sun. Carrington rotation maps of He 10830 Å and EUV 195 Å observations are used to identify the Coronal holes. The latitude distribution of the RCHs shows that most of them are appeared between \(\pm 20^{\circ }\) latitudes. In this period, more number of recurring coronal holes appeared in and around \(100^{\circ }\) and \(200^{\circ }\) Carrington longitudes. The large sized coronal holes lived for shorter period and they appeared close to the equator. From the area distribution over the latitude considered, it shows that more number of recurring coronal holes with area \(<10^{21}~\mbox{cm}^{2}\) appeared in the southern latitude close to the equator. The rotation rates calculated from the RCHs appeared between \(\pm 60^{\circ }\) latitude shows rigid body characteristics. The derived rotational profiles of the coronal holes show that they have anchored to a depth well below the tachocline of the interior, and compares well with the helioseismology results.     

Estimation of atmospheric surface layer parameters and numerical simulation using MM5 at Mangalore, West Coast of India

Atmospheric surface layer meteorological observations obtained from 20-m-high meteorological tower at Mangalore, situated along the west coast of India are used to estimate the surface layer scaling parameters of roughness length (z _o) and drag coefficient (C _D), surface layer fluxes of sensible heat and momentum. These parameters are computed using the simple flux–profile relationships under the framework of Monin–Obukhov (M–O) similarity theory. The estimated values of z _o are higher (1.35–1.54 m) than the values reported in the literature (>0.4–0.9 m) probably due to the undulating topography surrounding the location. The magnitude of C _D is high for low wind speed (<1.5 m s^?1) and found to be in the range 0.005–0.03. The variations of sensible heat fluxes (SHF) and momentum fluxes are also discussed. Relatively high fluxes of heat and momentum are observed during typical days on 26–27 February 2004 and 10–11 April 2004 due to the daytime unstable atmospheric conditions. Stable or near neutral conditions prevail after 1700 h IST with negative SHF. A mesoscale model PSU/NCAR MM5 is run using a high-resolution (1 km) grid over the study region to examine the influence of complex topography on the surface layer parameters and the simulated fluxes are compared with estimated values. Spatial variations of the frictional velocity (u _*), C _D, surface fluxes, planetary boundary layer (PBL) height and surface winds are noticed according to the topographic variations in the simulation.     

Area estimation of arecanut plantations in Sirsi Taluk using IRS data

Extent and distribution pattern of arecanut plantations in Sirsi Taluk, Uttara Kannada District, Kamataka have been studied using IRS, LISS II data. The plantations are found to exhibit perfect zonality, distinct structure and contrasting tonal characteristics and thereby enable their differentiation from other land use/land cover categories encountered in the area. The study not only established the utility of IRS data in acreage estimation of this unique category of land use having significant economic relevance in the area but also in assessing the scope for planning development of spices in these plantations.     

Large-scale dynamics have greater role than thermodynamics in driving precipitation extremes over India

Climate Dynamics - The changing characteristics of precipitation extremes under global warming have recently received tremendous attention, yet the mechanisms are still insufficiently understood....