“蛟龙”号载人潜水器运行与保障信息管理系统设计与应用

2017年我国"蛟龙"号载人潜水器完成了为期5年的试验性应用,期间累计下潜100余次,形成和建立了科学完善的应用保障体系和专业的应用人才队伍。以"蛟龙"号试验性应用中运行与保障的实践经验为基础,针对其中设备与备品备件管理、运行作业管理、拆检总装管理、数据资料查询与利用等方面的重要需求,设计开发了一套"蛟龙"号载人潜水器运行与保障信息管理系统,通过信息化平台实现设备资源、作业成果以及经验积累传承之间的高效衔接与复用,最大限度地降低装备运行成本、提高作业效率、保障海上作业安全。文章提出的载人潜水器运维体系能够为我国其他行业或部门的载人潜水器、远程缆控机器人(ROV)、水下自治机器人(AUV)等重大海洋装备的运行与保障提供有益参考借鉴。     

湖南省似大地水准面2017模型及精度分析

利用近7万个湖南及邻近省份重力观测数据、502个GNSS/水准控制点及数字高程模型，以EIGEN-6C4全球重力场模型作参考重力场，采用顾及地球曲率影响的各类地形质量位及引力的第二类Helmert凝集法严密算法，利用高分辨率地形数据恢复甚短波扰动重力场，确定空间分辨率2′×2′的高精度湖南省似大地水准面模型（HNGG2017）。经外部检核，模型整体精度均优于±0.022 m。与历史模型相比，新模型在湖南北部常德汉寿、西南部永州江永等地区精度得到显著改善。     

宣郁通经汤合少腹逐瘀汤加减治疗子宫内膜异位症痛经48例总结

目的：观察宣郁通经汤合少腹逐瘀汤加减治疗子宫内膜异位症痛经的临床疗效。方法：将96例子宫内膜异位症痛经患者随机分为2组，每组各48例。治疗组予宣郁通经汤合少腹逐瘀汤加减治疗，对照组予米非司酮治疗，疗程均为4个月。比较2组综合疗效及治疗前后痛经积分的变化情况。结果：总有效率治疗组为93.75%，对照组为75.00%，2组比较，差异有统计学意义（P<0.05）；2组痛经积分治疗前后组内比较及治疗后组间比较，差异均有统计学意义（P<0.01）。结论：宣郁通经汤合少腹逐瘀汤加减治疗子宫内膜异位症痛经较单用米非司酮治疗效果更好。     

顾及地类转换差异的城市空间扩展元胞自动机模型及应用研究

元胞自动机模型已经成为城市空间扩展模拟研究的重要方法之一,并得到广泛应用。然而,现有的城市扩展元胞自动机模型仍存在不足。由于元胞状态设置较为简单,从而使模型转换规则中对不同用地类型向城市用地转换的差异与强度考虑不够。基于此本文在元胞自动机模型的框架下,设计了多元结构的元胞状态及转换规则,提出了顾及地类转换差异与强度的城市扩展元胞自动机模型。在计算非城市用地向城市用地转换的转换概率时,该模型考虑了3个方面的概率：① 地形地貌、经济发展等城市发展的驱动因素对城市用地扩展的影响概率,该概率采用logistics方法进行计算;② 邻域元胞的用地类型对中心元胞转换概率的影响,该概率采用扩展摩尔型方法进行计算;③ 不同类型的非城市用地（本研究中包括耕地、林地和裸地3种类型）向城市用地转换的强度,该概率由模拟基期土地利用数据与目标年份土地利用数据的叠加,得出不同类型的非城市用地在此时间段内向城市用地转换的规模,进而确定不同类型的非城市用地向城市用地转换的强度。最后,将以上3种概率的乘积作为元胞转换的概率。通过转换概率与转换阈值的对比判断中心元胞是否在下一个阶段转换为城市用地。经过迭代计算,不断增加城市用地元胞的数量。当模拟城市用地的结果与目标年份的城市用地规模差值在一定的范围内时停止模拟,得出最终结果。模型构建完成后,本文以长株潭城市群核心区为例进行了模拟实验。以2001年该地区的土地利用数据为基期数据,模拟2010年该地区的城市用地规模和空间分布。研究结果表明,根据本文提出的模型模拟的城市扩展结果与真实数据相比具有较高的一致性。模拟结果正确率达到68.66%,比基于传统logistics回归的元胞自动机模型的模拟精度提高了4.25%,Kappa系数为0.675。该模型较好地模拟了长株潭城市群核心区城市扩展,在城市空间扩展模拟中具有较好的适应性与有效性。     

Bibliometric Analysis of Global Research Progress on Coastal Flooding 1995–2016

Global research progress on coastal flooding was studied using a bibliometric evaluation of publications listed in the Web of Science extended scientific citation index. There was substantial growth in coastal flooding research output, with increasing publications, a higher collaboration index, and more references during the 1995–2016 period. The USA has taken a dominant position in coastal flooding research, with the US Geological Survey leading the publications ranking. Research collaborations at institutional scales have become more important than those at global scales. International collaborative publications consistently drew more citations than those from a single country. Furthermore, coastal flooding research included combinations of multi-disciplinary categories, including ‘Geology' and ‘Environmental Sciences Ecology'. The most important coastal flooding research sites were wetlands and estuaries. While numerical modeling and 3 S(Remote sensing, RS; Geography information systems, GIS; Global positioning systems, GPS) technology were the most commonly used methods for studying coastal flooding, Lidar gained in popularity. The vulnerability and adaptation of coastal environments, their resilience after flooding, and ecosystem services function showed increases in interest.     

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

紫外-可见分光光度法测定多花黄精多糖含量

目的：测定湖南洪江国家黄精标准化基地多花黄精中的多糖含量，为多花黄精的进一步开发利用及药材质量标准研究奠定基础。方法：以葡萄糖为标准品，采用硫酸-蒽酮试剂显色，应用紫外-可见分光光度法测定多花黄精多糖含量。结果：葡萄糖在3.28～19.68μg/mL范围内线性良好（r=0.9992），多花黄精多糖平均含量为8.05%。结论：洪江种植基地的多花黄精品质优良，洪江是道地黄精药材种植理想基地。     

Smectite formation in metalliferous sediments near the East Pacific Rise at 13°N

A 43 cm long E271 sediment core collected near the East Pacific Rise(EPR) at 13°N were studied to investigate the origin of smectite for understanding better the geochemical behavior of hydrothermal material after deposition.E271 sediments are typical metalliferous sediments. After removal of organic matter, carbonate, biogenic opal,and Fe-Mn oxide by a series of chemical procedures, clay minerals(2 μm) were investigated by X-ray diffraction,chemical analysis and Si isotope analysis. Due to the influence of seafloor hydrothermal activity and close to continent, the sources of clay minerals are complex. Illite, chlorite and kaolinite are suggested to be transported from either North or Central America by rivers or winds, but smectite is authigenic. It is enriched in iron, and its contents are highest in clay minerals. Data show that smectite is most likely formed by the reaction of hydrothermal Fe-oxyhydroxide with silica and seawater in metalliferous sediments. The Si that participates in this reaction may be derived from siliceous microfossils(diatoms or radiolarians), hydrothermal fluids, or detrital mineral phases. And their δ30 Si values are higher than those of authigenic smectites, which implies that a Si isotope fractionation occurs during the formation because of the selective absorption of light Si isotopes onto Feoxyhydroxides. Sm/Fe mass ratios(a proxy for overall REE/Fe ratio) in E271 clay minerals are lower than those in metalliferous sediments, as well as distal hydrothermal plume particles and terrigenous clay minerals. This result suggests that some REE are lost during the smectite formation, perhaps because their large ionic radii of REE scavenged by Fe-oxyhydroxides preclude substitution in either tetrahedral or octahedral lattice sites of this mineral structure, which decreases the value of metalliferous sediments as a potential resource for REE.     

Enhanced a novel β-agarase production in recombinant Escherichia coli BL21(DE3) through induction mode optimization and glycerol feeding strategy

Agarases are hydrolytic enzymes that act on the hydrolysis of agar and have a broad range of applications in food,cosmetics and pharmaceutical industries. In this study, a glycerol feeding strategy based on induction mode optimization for high cell density and β-agarase production was established, which could effectively control acetate yield. First, exponential feeding strategy of glycerol with different overall specific growth rates(μ) was applied in the pre-induction phase. The results showed that the low μ(μ=0.2) was suggested to be the optimal for cell growth and β-agarase production. Second, the effects of induction temperature and the inducer concentration on cell growth and β-agarase production were investigated in the post-induction phase. When induced by isopropyl-β-d-thiogalactoside(IPTG), the strategy of 0.8 mmol/L IPTG induction at 20℃ was found to be optimal for β-agarase production. When cultivation was induced by continuous lactose feeding strategy of 1.0 g/(L·h), the β-agarase activity reached 112.5 U/mL, which represented the highest β-agarase production to date.Furthermore, the β-agarase was capable of degrading G. lemaneiformis powder directly to produce neoagarooligosaccharide, and the hydrolysates were neoagarotetraose(NA4) and neoagarohexaose(NA6). The overall research may be useful for the industrial production and application of β-agarase.     

Soil and Vegetation Spectral Coupling Difference (SVSCD) for Minerals Extraction from Hyperion Data in Vegetation Covered Area

Remote sensing data have been widely applied to extract minerals in geologic exploration, however, in areas covered by vegetation, extracted mineral information has mostly been small targets bearing little information. In this paper, we present a new method for mineral extraction aimed at solving the difficulty of mineral identification in vegetation covered areas. The method selected six sets of spectral difference coupling between soil and plant (SVSCD). These sets have the same vegetation spectra reflectance and a maximum different reflectance of soil and mineral spectra from Hyperion image based on spectral reflectance characteristics of measured spectra. The central wavelengths of the six, selected band pairs were 2314 and 701 nm, 1699 and 721 nm, 1336 and 742 nm, 2203 and 681 nm, 2183 and 671 nm, and 2072 and 548 nm. Each data set’s reflectance was used to calculate the difference value. After band difference calculation, vegetation information was suppressed and mineral abnormal information was enhanced compared to the scatter plot of original band. Six spectral difference couplings, after vegetation inhibition, were arranged in a new data set that requires two components that have the largest eigenvalue difference from principal component analysis (PCA). The spatial geometric structure features of PC1 and PC2 was used to identify altered minerals by spectral feature fitting (SFF). The collecting rocks from the 10 points that were selected in the concentration of mineral extraction were analyzed under a high-resolution microscope to identify metal minerals and nonmetallic minerals. Results indicated that the extracted minerals were well matched with the verified samples, especially with the sample 2, 4, 5 and 8. It demonstrated that the method can effectively detect altered minerals in vegetation covered area in Hyperion image.