Impacts of tourism development on the physical environment of Mussoorie,a hill station in the lower Himalayan range of India

Tourism in mountainous regions is a significant source of revenue generation. However, it has also been associated with many adverse environmental consequences. This study aims at assessing the negative impacts of the incessant upsurge in tourism development on the physical environment of Mussoorie, a well-known mountain tourist destination in India. The impact indicators for the region were identified and assessed by qualitative and quantitative analysis of field observations. The observations indicated the aggravation of traffic congestion, atmospheric pollution, undisposed solid waste, water scarcity and infrastructure unavailability as the prevalent issues, especially during the peak tourist months. The extent of the consequential damage to the environment was evaluated by conducting an assessment of tourism-induced human disturbance on the natural landscape of the town. Slope, slope aspect, vegetation cover, road network and drainage network were incorporated as the determining landscape attributes to prepare thematic maps of landscape quality (perceivable intrinsic properties) and landscape fragility (vulnerability to anthropogenic disturbances) using GIS technique. An absorption capacity map was finally prepared to characterize the study area into regions of different conservation needs. The results identified the need for planning appropriate preservation strategies for different tourist places in the town. The study can be used by the policy makers for implementing the regulatory measures against potential disturbances due to mass-tourism.     

Investigation of dominant modes of monsoon ISO in the northwest and eastern Himalayan region

This study investigates the altitudinal variation of dominant modes of summer monsoon intra-seasonal oscillation (ISO) over the Northwest (NWH) and Eastern Himalayan (EH) region using (i) spatially scattered 133 number of station rainfall observations and (ii) latitudinal transect-wise (LT) rainfall variation, obtained from an observed interpolated gridded rainfall data for the period 1995–2004. The altitudinal variation of dominant modes of monsoon ISO were investigated by exploring the strong and weak phases of the principal components of 10–90 days bandpass rainfall data of June to September with respect to location specific station height. Investigation of frequency of days for light and moderate rainfall along with the occurrence of total seasonal rainy days has revealed existence of a rainfall maximum around 2100 m height for the NWH region. Similarly, the total seasonal rainy days of EH region was found to have maxima between 1100 and 1400 m height. Analyses of the spatially scattered station rainfall observation for the NWH region showed that the strong periods of ISO modes exist around 747.9 (±131.7) m and 2227.2 (±100.2) m heights. Over the EH region, the dominant modes of the monsoon ISO were found to be centred around 1200 m. Significant alterations of strong and weak phases of monsoon ISO as a response to altitudinal variation in the mountain surface were observed when latitudinal transect-wise variation of monsoon ISO modes were investigated.     

Way forward to achieve sustainable and cost-effective biofuel production from microalgae: a review

Driven by policies aimed at enhancing energy security and mitigating greenhouse gas emissions, the production and use of biofuels have significantly increased in recent years. Microalgae owing to its multiple advantages which include high lipid content, sustainable biomass production, effective land and water utilization are the most potential biofuel feedstock that can provide drop-in fossil fuel replacements without stimulating competition for agricultural resources and are considered to be more environmentally benign than the first- and second-generation biofuel feedstocks. However, there are many existing technical and scientific impediments that are yet to be resolved. Keeping this in view, the present review provides a concise account of the microalgal species known to accumulate high levels of lipid and describes the main factors that should be taken into consideration while selecting suitable algal strains for mass cultivation. The underlining advantages and limitations of raceway pond and photobioreactor cultivation systems are also examined. The recent advances in genetic engineering of microalgae to improve biomass and lipid productivity are then highlighted, which include the ongoing debate over the biosafety issues pertinent to the use of genetically modified algae. Furthermore, a wide range of high-value products that can be co-produced from microalgae have been discussed. The review concludes with a comprehensive summary of the major techno-economic constraints to commercialization of algal-derived biofuels along with promising methods for overcoming these challenges in order to produce cost-competitive and environmentally sustainable biofuel.     

A micromechanical experimental study of highly/completely decomposed tuff granules

In this paper, an experimental micromechanical study is presented investigating the contact mechanics and tribological behaviour of highly/completely decomposed tuff granules. The parent material was taken from two locations—named the top and bottom—from a recent landslide in Hong Kong, and in this study the tested granules were obtained from the parent material after drying and sieving processes. Basic material characterisation was conducted quantifying the particle shape, the surface roughness and the strength of a set of grains. A set of twenty-nine monotonic inter-particle shearing tests were conducted on pairs of granules taken from the top and bottom of the landslide. It was found that the granules had very high friction angles at their contacts, in general greater in comparison with other materials reported in the literature. The slightly greater inter-particle friction for the granules taken from the top of the landslide might be because of their higher roughness in comparison with the ones from the bottom. Additional experiments were conducted to investigate the normal and tangential load–displacement response of the granules subjected to cyclic loading. A good curve fitting for the normal load–displacement response could be obtained by using very low apparent Young’s moduli in the Hertzian model. In general, the decomposed tuff granules showed significant plastic response during the first normal load cycle, and this plastic behaviour continued for the subsequent third and fourth cycles. In the cyclic inter-particle shearing tests, the nonlinearity and hysteresis increased for larger cyclic displacements, but the effect of the number of shearing cycles on the energy loss was generally small. Finally, a limited discussion is presented on the applicability of a theoretical model on the tangential load–displacement behaviour of the granules.     

Mapping lithological variations in a river basin of West Bengal,India using electrical resistivity survey: implications for artificial recharge

Groundwater is a treasured earth’s resource and plays an important role in addressing water and environmental sustainability. However, its overexploitation and wide spatial variability within a basin and/or across regions are posing a serious challenge for groundwater sustainability. Some parts of southern West Bengal of India are problematic for groundwater occurrence despite of high rainfall in this region. Characterization of an aquifer in this area is very important for sustainable development of water supply and artificial recharge. Electrical resistivity surveys using 1-D and 2-D arrays were performed at a regular interval from Subarnarekha River at Bhasraghat (south) to Kharagpur (north) to map the lithological variations in this area. Resistivity sounding surveys were carried out at an interval of 2–3 km. Subsurface resistivity variation has been interpreted using very fast simulated annealing (VFSA) global optimization technique. The analysis of the field data indicated that the resistivity variation with depth is suitable in the southern part of the area and corresponds to clayey sand. Interpreted resistivity in the northern part of the area is relatively high and reveals impervious laterite layer. In the southern part of the area resistivity varies between 15 and 40 Ωm at a depth below 30 m. A 2-D resistivity imaging conducted at the most important location in the area is correlated well with the 1-D results. Based on the interpreted resistivity variation with depth at different locations different types of geologic units (laterite, clay, sand, etc.) are classified, and the zone of interests for aquifer has been demarcated. Study reveals that southern part of the area is better for artificial recharge than the northern part. The presence of laterite cover in the northern part of the area restricts the percolation of rainwater to recharge the aquifer at depth. To recharge the aquifer at depth in the northern part of the area, rainwater must be sent artificially at depth by puncturing laterite layers on the top. Such studies in challenging areas will help in understanding the problems and finding its solution.     

Assessing the performance of WRF model in predicting high-impact weather conditions over Central and Western Africa: an ensemble-based approach

Natural Hazards - For numerical weather prediction over a particular region, it is important to know the best combination of physical parameterizations available in the considered modelling frame...     

Evaluation of spatial probability of landslides using bivariate and multivariate approaches in the Goriganga valley,Kumaun Himalaya,India

Natural Hazards - In this study, new hybrid artificial neural network (ANN) models were used for predicting the groundwater resource index. The salp swarm algorithm (SSA), particle swarm...