Crystal chemical significance of chemical zoning in dissakisite-(Ce)

Dissakisites from Trimouns dolomite mine, France, have two kinds of single crystals: chemical-zoned and homogeneous types. Back-scattered electron microprobe (BSE) images of these dissakisites reveal both Ca–Al rich dark zones and Fe-ΣREE rich bright zones. Crystal structures of three dark and two bright zones in a chemical-zoned dissakisite and of a homogeneous zone in unzoned dissakisite were refined to individual R indices (about 3.0–5.0%) based on 1,400 observed [|F ₀| > 4σF ₀] reflections measured with MoKα X-radiation using the single crystal diffractometer. The differences in brightness between their BSE images arise from those in coupled substitutions of the elements occupying A2 and M3 sites. The main reason for these differences is that ten-coordinated A2 polyhedra and M3 octahedra are directly linked through their shared edge, which creates a great potential for making this coupled substitution. This zoning indicates that formation of the whole zoned crystal, where each zone could be grown steadily with its crystallographic axes mutually parallel to each other, may be identified as autoepitaxy.     

Phase transition in Ca-poor clinopyroxenes

High(C2/c)-low(P2₁/c) phase transition in clinoenstatite and pigeonite was successfully observed in situ at high temperatures for the first time under a transmission electron microscope. The phase transition was revealed to possess the characteristics of a first-order transition, due to the coexistence of both phases separated by the sharp interfaces and the nucleation-growth process. The diffusionless and time-independent reaction suggests that the transition occurs athermal-martensitically. Furthermore, the small or even negative thermal hysteresis and the interface motion suggest that the transition is not a typical type but a thermoelastic type of the martensitic transformation. This type of the transformation, studied extensively in metallurgy in relation to shape memory effect, is first recognized in rock-forming minerals.     

Stability and P–V–T equation of state of KAlSi3O8-hollandite determined by in situ X-ray observations and implications for dynamics of subducted continental crust material

In situ X-ray diffraction measurements of KAlSi₃O₈-hollandite (K-hollandite) were performed at pressures of 15–27 GPa and temperatures of 300–1,800 K using a Kawai-type apparatus. Unit-cell volumes obtained at various pressure and temperature conditions in a series of measurements were fitted to the high-temperature Birch-Murnaghan equation of state and a complete set of thermoelastic parameters was obtained with an assumed K′_300,0=4. The determined parameters are V _300,0=237.6(2) Å³, K _300,0=183(3) GPa, (?K _T,0/?T) _P =?0.033(2) GPa K^?1, a ₀=3.32(5)×10^?5 K^?1, and b ₀=1.09(1)×10^?8 K^?2, where a ₀ and b ₀ are coefficients describing the zero-pressure thermal expansion: α _T,0 = a ₀ + b ₀ T. We observed broadening and splitting of diffraction peaks of K-hollandite at pressures of 20–23 GPa and temperatures of 300–1,000 K. We attribute this to the phase transitions from hollandite to hollandite II that is an unquenchable high-pressure phase recently found. We determined the phase boundary to be P (GPa)=16.6 + 0.007 T (K). Using the equation of state parameters of K-hollandite determined in the present study, we calculated a density profile of a hypothetical continental crust (HCC), which consists only of K-hollandite, majorite garnet, and stishovite with 1:1:1 ratio in volume. Density of HCC is higher than the surrounding mantle by about 0.2 g cm^?3 in the mantle transition zone while this relation is reversed below 660-km depth and HCC becomes less dense than the surrounding mantle by about 0.15 g cm^?3 in the uppermost lower mantle. Thus the 660-km seismic discontinuity can be a barrier to prevent the transportation of subducted continental crust materials to the lower mantle and the subducted continental crust may reside at the bottom of the mantle transition zone.     

P–V–T equation of state of Ca3Al2Si3O12 grossular garnet

The thermoelastic parameters of synthetic Ca₃Al₂Si₃O₁₂ grossular garnet were examined in situ at high-pressure and high-temperature by energy dispersive X-ray diffraction, using a Kawai-type multi-anvil press apparatus coupled with synchrotron radiation. Measurements have been conducted at pressures up to 20 GPa and temperatures up to 1,650 K: this P, T range covered the entire high-P, T stability field of grossular garnet. The analysis of room temperature data yielded V _0,300 = 1,664 ± 2 ?³ and K ₀ = 166 ± 3 GPa for K^￠₀ K^{\prime}_{0} fixed to 4.0. Fitting of our P–V–T data by means of the high-temperature third order Birch–Murnaghan or the Mie–Grüneisen–Debye thermal equations of state, gives the thermoelastic parameters: (∂K _0,T /∂T) _P  = −0.019 ± 0.001 GPa K⁻¹ and α _0,T  = 2.62 ± 0.23 × 10⁻⁵ K⁻¹, or γ ₀ = 1.21 for fixed values q ₀ = 1.0 and θ ₀ = 823 (Isaak et al. Phys Chem Min19:106–120, 1992). From the comparison of fits from two different approaches, we propose to constrain the bulk modulus of grossular garnet and its pressure derivative to K _T0 = 166 GPa and K^￠_T0 K^{\prime}_{T0}  = 4.03–4.35. Present results are compared with previously determined thermoelastic properties of grossular-rich garnets.     

<Emphasis Type="Italic">P</Emphasis>–<Emphasis Type="Italic">V</Emphasis>–<Emphasis Type="Italic">T</Emphasis> equation of state of CaAl<Subscript>4</Subscript>Si<Subscript>2</Subscript>O<Subscript>11</Subscript> CAS phase

The thermoelastic parameters of the CAS phase (CaAl₄Si₂O₁₁) were examined by in situ high-pressure (up to 23.7 GPa) and high-temperature (up to 2,100 K) synchrotron X-ray diffraction, using a Kawai-type multi-anvil press. P–V data at room temperature fitted to a third-order Birch–Murnaghan equation of state (BM EOS) yielded: V _0,300 = 324.2 ± 0.2 Å³ and K _0,300 = 164 ± 6 GPa for K′ _0,300 = 6.2 ± 0.8. With K′ _0,300 fixed to 4.0, we obtained: V _0,300 = 324.0 ± 0.1 Å³ and K _0,300 = 180 ± 1 GPa. Fitting our P–V–T data with a modified high-temperature BM EOS, we obtained: V _0,300 = 324.2 ± 0.1 Å³, K _0,300 = 171 ± 5 GPa, K′ _0,300 = 5.1 ± 0.6 (?K _0,T /?T) _P  = ?0.023 ± 0.006 GPa K^?1, and α_0,T  = 3.09 ± 0.25 × 10^?5 K^?1. Using the equation of state parameters of the CAS phase determined in the present study, we calculated a density profile of a hypothetical continental crust that would contain ~10 vol% of CaAl₄Si₂O₁₁. Because of the higher density compared with the coexisting minerals, the CAS phase is expected to be a plunging agent for continental crust subducted in the transition zone. On the other hand, because of the lower density compared with lower mantle minerals, the CAS phase is expected to remain buoyant in the lowermost part of the transition zone.     

Prolonged impact of earthquake-induced landslides on sediment yield in a mountain watershed: The Tanzawa region, Japan

To determine for how long a landslide affects sediment discharge, the sediment yields of 15 check-dam basins were compared with the time series of landslide distributions in a mountain basin in the Tanzawa region, central Japan. The distribution of sediment yield was quantitatively estimated from deposition in the sediment pools of check dams. The relationship between the landslide history and sediment discharge in the Nakagawa River basin was examined for an approximately 80-year period. Two major landslide events occurred during this period: the 1923 Kanto Earthquake and the 1972 disaster caused by heavy rainfall. The resulting trend in sediment discharge of the whole basin, estimated using reservoir sedimentation in the Miho Dam at its base, was nearly constant, with high sediment discharge (2897 m³ km^− 2 yr^− 1) in the intervening quarter-century, despite the recovery of vegetation on landslide areas in this period. Comparisons of the landslide distributions resulting from the two disasters, the sediment yields of check-dam basins, and the sediment discharge of the whole basin indicate that recent sediment discharge contains landslide debris that was originated by the Kanto Earthquake that occurred over 80 years ago. Thus, to understand high sediment discharge, it is essential to investigate not only the current basin condition and recent events, but also the landslide history of the basin for at least the previous 100 years.     

Determination of Nickel in GSJ Standard Rock Samples Using Secondary Ion Mass Spectrometry

Trace level determination of nickel in silicate rock samples has been achieved using secondary ion mass spectrometry (SIMS) with kinetic energy filtering. Standard rock references, issued by the Geological Survey of Japan, were fused into glass and used as standards for the SIMS analysis. Due to interferences from the glass matrix, the secondary ion of mass 60 was only useful for Ni, although the secondary ion was interfered mainly by CaO+. The contributions of these molecular ions were deconvolved by a least squares regression. Good linear correlation between results after the deconvolution and the Ni concentration in the glass standards was obtained. The uncertainties of the SIMS analysis depend strongly on the degree of contribution of CaO+ molecular ion. Such a method of SIMS analysis is especially useful to study the detailed behavior of Ni on a micro-scale in Ca-poor materials.     

High-pressure Raman studies and heat capacity measurements on the MgSiO<Subscript>3</Subscript> analogue CaIr<Subscript>0.5</Subscript>Pt<Subscript>0.5</Subscript>O<Subscript>3</Subscript>

Raman spectroscopy and heat capacity measurements have been used to study the post-perovskite phase of CaIr_0.5Pt_0.5O₃, recovered from synthesis at a pressure of 15 GPa. Laser heating CaIr_0.5Pt_0.5O₃ to 1,900 K at 60 GPa produces a new perovskite phase which is not recoverable and reverts to the post-perovskite polymorph between 20 and 9 GPa on decompression. This implies that Pt-rich CaIr_1−xPt_xO₃ perovskites including the end member CaPtO₃ cannot easily be recovered to ambient pressure from high P–T synthesis. We estimate an increase in the thermodynamic Grüneisen parameter across the post-perovskite to perovskite transition of 34%, of similar magnitude to those for (Mg,Fe)SiO₃ and MgGeO₃, suggesting that CaIr_0.5Pt_0.5O₃ is a promising analogue for experimental studies of the competition in energetics between perovskite and post-perovskite phases of magnesium silicates in Earth’s lowermost mantle. Low-temperature heat capacity measurements show that CaIrO₃ has a significant Sommerfeld coefficient of 11.7 mJ/mol K² and an entropy change of only 1.1% of Rln2 at the 108 K Curie transition, consistent with the near-itinerant electron magnetism. Heat capacity results for post-perovskite CaIr_0.5Rh_0.5O₃ are also reported.     

Dissakisite-(Ce) chemical composition: some implications for its origins

Euhedral dissakisites from Trimouns dolomite mine, France, is compositionally zoned. Back-scattered electron (BSE) images reveal that each of the described dissakisite crystals has three distinct compositional zones: normal zoned core (Mg-rich), oscillatory zoned middle (Ca–Al-rich) and homogeneous rim (Fe–ΣREE-rich). The latter zone with Fe²⁺ > Mg corresponds to allanite-(Ce). Dissakisite-(Ce) also displays pronounced zoning in Fe/Mg which may suggest that the temperature of crystallization continuously decreased from core to rim. Despite a systematic increase in Fe/Mg of the dissakisite with an allanite rim, there is no monotonic decrease in the REE zoning: the normal zoned core and homogeneous rim are rich in La, Ce and Pr, but the relatively REE-poor oscillatory zoned middle is relatively abundant in Y, Sm and Gd. Discontinuous variation in REE content of the dissakisite, with the allanite rim may indicate a localized change in either the relative concentration of various ligands or pH of the crystallizing fluid. Observations under the polarizing microscope confirm that the different zones have simultaneous extinction. These chemical and optical observations suggest that epitaxial crystallization of dissakisite, from Trimouns, passes through three formation stages. The ternary Fe²⁺–Mg²⁺–(Al + Fe)³⁺ diagram illustrates that in general dissakisite can be classified into two groups, (Al + Fe)³⁺-rich and an Mg-rich; dissakisite from Trimouns belongs to the former group. Chondrite-normalized REE patterns of dissakisites from Trimouns are similar to those of allanites formed by hydrothermal fluids. In conclusion, it is clear from the above two geochemical characteristics that dissakisites from Trimouns are of (Al + Fe)³⁺-type, and were derived from hydrothermal fluids.