Measurements of Flux Cancellation During Filament Formation

We study the process of flux cancellation and filament formation in a nest of three decaying active regions, using data from SOHO MDI and EIT, and Hα images from Meudon and Big Bear. We find that there are no apparent EUV loops connecting the two poles of a cancelling feature prior to and during cancellation, suggesting an absence of coronal magnetic connectivity between these opposite polarity flux patches. We further find that the cancellation occurs at the ends of the Hα sections of the filament and is accompanied by a noticeable increase in Hα intensity and linkage of the Hα sections, but that the locations of the links remain the weakest in Hα absorption. We present our measurements of the amount of flux cancelled at each site and show it is in agreement with an estimate of the axial flux contained in the filament. We also observe two events of flux emergence, and find that they do not influence the filament formation in this case. We compare our results with similar measurements in recent papers and find agreement for the amounts of cancelled flux per patch, except for one case in a young emerging active region, for which we provide an alternative interpretation. We conclude that our measurements of flux cancellation are consistent with both the scenarios in which the filament is formed through ``head-to-tail" linkage, as well as the scenario in which filament flux tubes emerge as a whole from below the photosphere, but that only the former scenario is consistent with the apparent absence of coronal magnetic links between the cancelling magnetic patches.     

Palynofacies and sea-level changes in the Upper Cretaceous of the Vocontian Basin, southeast France

Upper Cretaceous platform carbonates of the Vocontian Basin (southeastern France) have been investigated in a cross-section from the proximal deposits exposed in the lower Rhône Valley to the distal part of the basin in the Southern Subalpine Ranges north of Nice. The stratigraphic interval studied in detail spans the uppermost Turonian and Coniacian.Palynofacies patterns were used to detect eustatic signals at a third-order scale and are the tool for correlation of proximal and distal platform deposits. The organic constituents observed in the studied samples have been grouped into a continental fraction, including higher plant debris (phytoclasts) and sporomorphs, and a marine fraction with dinoflagellate cysts, acritarchs, prasinophytes, and foraminiferal test linings. The main factors influencing the stratigraphic and spatial distribution of land-derived, allochthonous, and marine, relatively autochthonous, organic particles are the proximity of land, the organic productivity, the degree of biodegradation and the hydrodynamic conditions of the depositional system. Palynofacies parameters used for the sequence stratigraphic interpretation are: (1) the ratio of continental to marine constituents (CONT/MAR ratio); (2) the ratio of opaque to translucent phytoclasts (OP/TR ratio); (3) the phytoclast particle size and shape; and (4) the relative proportion and species diversity of marine plankton. Ternary diagrams illustrating significant proximality changes were used to decipher transgressive-regressive trends within the succession.High amounts of translucent phytoclasts and decreasing values of the CONT/MAR ratio occur during the phase of relative sea-level rise in the upper Turonian. The stratigraphic interval of maximum flooding around the Turonian/Coniacian boundary is marked by the highest abundance and species diversity of dinoflagellate cysts, and by high percentages of opaque, equidimensional particles within the phytoclast group. The OP/TR ratio is still high within the lower Coniacian representing the early highstand deposits, whereas the relative abundance of marine constituents is again decreasing. Sedimentary organic matter of the upper Coniacian is dominated by large, blade-shaped, mainly opaque phytoclasts, which are a characteristic palynofacies signature of late highstand deposits.The present study demonstrates the high potential of palynofacies analysis in high-resolution stratigraphy and correlation of sedimentary series of shallow epeiric seas.     

Detection of DNA damage in mussels and sea urchins exposed to crude oil using comet assay

The single-cell microgel electrophoresis assay or the comet assay was used to evaluate DNA damage of dispersed crude oil on sea urchins (Strongylocentrotus droebachiensis) and mussels (Mytilus edulis L.). Sea urchins were exposed to 0.06 and 0.25 mg/L dispersed crude oil in a continuous flow system, while the mussels were exposed to 0.015, 0.06 and 0.25 mg/L dispersed crude oil. Sea urchin coelomocytes and mussel haemocytes were sampled after 4 and 5 weeks exposure, respectively. In the sea urchin coelomocytes, there was a significant concentration-related increase in the percentage of DNA in comet tail. In mussel haemocytes, there was a significantly higher percentage of DNA in comet tail for all treatments compared to the control. The responses were concentration-related up to 0.06 mg/L oil. The two highest exposure concentrations of mussels were not significantly different from each other. These results indicate that the comet assay can be used for biomonitoring of DNA damage in marine invertebrates following oil contamination.     

The point spread function of the soft X-ray telescope aboard Yohkoh

The point spread function of the SXT telescope aboardYohkoh has been measured in flight configuration in three different X-ray lines at White Sands Missile Range. We have fitted these data with an elliptical generalization of the Moffat function. Our fitting method consists of ² minimizationin Fourier space, especially designed for matching of sharply peaked functions. We find excellent fits with a reduced ² of order unity or less for single exposure point spread functions over most of the CCD. Near the edges of the CCD the fits are less accurate due to vignetting. From fitting results with summation of multiple exposures we find a systematic error in the fitting function of the order of 3% near the peak of the point spread function, which is close to the photon noise for typical SXT images in orbit. We find that the full width to half maximum and fitting parameters vary significantly with CCD location. However, we also find that point spread functions measured at the same location are consistent to one another within the limit determined by photon noise. A best analytical fit to the PSF as function of position on the CCD is derived for use in SXT image enhancement routines. As an aside result we have found that SXT can determine the location of point sources to about a quarter of a 2.54 arc sec pixel.This paper is dedicated to the memory of our friend and colleague Kermit Smith, who died in June 1993, after a valient fight with leukemia.     

Shear-induced instability and arch filament eruption: A magnetohydrodynamic (MHD) numerical simulation

We investigate, via a two-dimensional (nonplanar) MHD simulation, a situation wherein a bipolar magnetic field embedded in a stratified solar atmosphere (i.e., arch-filament-like structure) undergoes symmetrical shear motion at the footpoints. It was found that the vertical plasma flow velocities grow exponentially leading to a new type of global MHD-instability that could be characterized as a Dynamic Shearing Instability, with a growth rate of about 8{ovV} _A a, where {ovV} _A is the average Alfvén speed and a ^–1 is the characteristic length scale. The growth rate grows almost linearly until it reaches the same order of magnitude as the Alfvén speed. Then a nonlinear MHD instability occurs beyond this point. This simulation indicates the following physical consequences: the central loops are pinched by opposing Lorentz forces, and the outer closed loops stretch upward with the vertically-rising mass flow. This instability may apply to arch filament eruptions (AFE) and coronal mass ejections (CMEs).To illustrate the nonlinear dynamical shearing instability, a numerical example is given for three different values of the plasma beta that span several orders of magnitude. The numerical results were analyzed using a linearized asymptotic approach in which an analytical approximate solution for velocity growth is presented. Finally, this theoretical model is applied to describe the arch filament eruption as well as CMEs.     

Microbial Degradation of Tar Oil Compounds under Different Redox Conditions

The microbial transformation of typical tar oil compounds such as acridine, benzo(b)thiophene, dibenzofuran, indane, and indene under different redox conditions was investigated in microcosm studies. Under aerobic conditions the inherent contamination in polluted soil as well as the added N‐, S‐, O‐ heterocyclic and homocyclic compounds were transformed predominantly apart from thiophene. 1‐Indanone was detected by RP‐HPLC‐DAD and GC‐MS as an intermediate metabolite from indane and indene. Under nitrate and sulfate reducing conditions indane, benzo(b)thiophene, and dibenzofuran were transformed in assays with the polluted soil samples from well B 65 and B 66 within 426 days, whereas they were persistent in assays with the highly polluted soil B 67. All heterocyclic and homocyclic compounds added to the non‐contaminated soil from well B 85 were not degraded under nitrate and sulfate reducing conditions, too. The results indicate that for the decision, wether natural attenuation can be implemented in the remediation of contaminated site, in addition to BTEX and PAHs especially the fate of further tar oil compounds in anoxic aquifers has to be considered.     

SENSITIVITY OF MALARIA, SCHISTOSOMIASIS AND DENGUE TO GLOBAL WARMING

Global assessment of the potential impacts of anthropogenically-induced climate change on vector-borne diseases suggests an increase in extent of the geographical areas susceptible to transmission of malarial Plasmodium parasites, dengue Flavivirus and Schistosoma worms. The transmission potential of the three associated vector-borne diseases studied is highly sensitive to climate changes on the periphery of the currently endemic areas and at higher altitudes within such areas. Our findings vis-à-vis the present endemic areas indicate that the increase in the epidemic potential of malaria and dengue transmission may be estimated at 12–27% and 31–47%, respectively, while in contrast, schistosomiasis transmission potential may be expected to exhibit a 11–17% decrease.     

Primary minerals of Zn-Pb mining and metallurgical dumps and their environmental behavior at Plombières,Belgium

The primary phases and minerals of the Plombières dumps include typical smelting furnace products such as metallic Fe, Pb, Cu, Zn, Fe-Zn alloys, carbides, phosphides, sulfides of Fe, Zn, Pb, Cu, Mn (alabandite), and FeAs. Spinels, mainly of Fe and Al, are common constituents of the primary assemblage; substitution by Zn, V, Cr, Ti, Mg, and Ca occurs. Primary phases also include the most common Zn-rich fayalite, Zn-rich Ca-Fe silicates, melilite, corundum, and apatite. Most of the Zn is incorporated in iron silicates, ZnO and ZnS. Lead occurs mainly as PbS, metallic lead, and is also present in coal residues. Cadmium is found mainly in metallic zinc and its alloys and in ZnO. The dumps also contain mining wastes composed of pyrite, melnikovite, and iron oxides produced by natural weathering of Zn-Pb ores. Melnikovite and iron oxides are rich in As, Pb, and Zn and possess an increased content of Tl. Leaching tests carried out on the surfaces of polished sections indicate that acid rain (solutions I and II) will mobilize mainly Zn and Cd and, to a much smaller extent, Pb and Sb. Leaching of metals by sulfate-chloride fluids present in the pore network of dumps (solutions III, IV, and V) depends on the pH, which in the dumps is controlled by the proportion of carbonates to sulfides. The more acid fluids leach both sulfides and silicates.     

A hydropedological approach to simulate streamflow and soil water contents with SWAT+

Reflecting internal catchment hydrological processes in hydrological models is important for accurate predictions of the impact of climate and land-use change on water resources. Characterizing these processes is however difficult and expensive due to their dynamic nature and spatio-temporal variability. Hydropedology is a relatively new discipline focusing on the synergistic integration of hydrology, soil physics and pedology. Hydropedological interpretations of soils and soil distribution can be used to characterize key hydrological processes, especially in areas with no or limited hydrometric measurements. Here we applied a hydropedological approach to reflect flowpaths through detailed routing in SWAT+ for a 157 ha catchment (Weatherley) in South Africa. We compared the hydropedological approach and a standard (no routing) approach against measured streamflow (two weirs) and soil water contents (13 locations). The catchment was treated as ‘ungauged’ and the model was not calibrated against hydrometric measurements in order to determine the direct contribution of hydropedology on modelling efficiency. Streamflow was predicted well without calibration (NSE > 0.8; R² > 0.82) for both approaches at both weirs. The standard approach yielded slightly better streamflow predictions. The hydropedological approach resulted in considerable improvements in the simulation of soil water contents (R² increased from 0.40 to 0.49 and PBIAS decreased from 40% to 20%). The routing capacity of SWAT+ as employed in the hydropedological approach reduced the underestimation of wetland water regimes drastically and resulted in a more accurate representation of the dominant hydrological processes in this catchment. We concluded that hydropedology can be a valuable source of ‘soft data’ to reflect internal catchment structure and processes and, potentially, for realistic calibrations in other studies, especially those conducted in areas with limited hydrometric measurements.