Wetlands and low-gradient topography are associated with longer hydrologic transit times in Precambrian Shield headwater catchments

The estimation of hydrologic transit times in a catchment provides insights into the integrated effects of water storage, mixing dynamics, and runoff generation processes. There has been limited effort to estimate transit times in southern boreal Precambrian Shield landscapes, which are characteristically heterogeneous with surface cover including till, thin soils, bedrock outcrops, and depressional wetland features that play contrasting hydrologic roles. This study presents approximately 3.5 years of precipitation and streamflow water isotope data and estimates mean transit times (MTTs) and the young water fraction (p_y) across six small catchments in the Muskoka-Haliburton region of south-central Ontario. The main objectives were to define a typical range of MTTs for headwater catchments in this region and to identify landscape variables that best explain differences in MTTs/p_y using airborne light detection and ranging and digital terrain analysis. Of the transit time distributions, the two parallel linear reservoir and gamma distributions best describe the hydrology of these catchments, particularly because of their ability to capture more extreme changes related to events such as snowmelt. The estimated MTTs, regardless of the modelling approach or distribution used, are positively associated with the percent wetland area and negatively with mean slope in the catchments. In this landscape, low-gradient features such as wetlands increase catchment scale water storage when antecedent conditions are dryer and decrease transit times when there is a moisture surplus, which plausibly explains the increases in MTTs and mean annual runoff from catchments with significant coverage of these landscape features.     

Appraisal of Hydraulic Flow Units and Factors of the Dynamics and Contamination of Hydrogeological Units in the Littoral Zones: A Case Study of Akwa Ibom State University and Its Environs,Mkpat Enin L.G.A,Nigeria

Natural Resources Research - Borehole-controlled one-dimensional geo-electric data were integrated with water samples obtained from boreholes drilled near the vertical electrical sounding at 12...     

Simulations of multimode bolometric interferometers

We describe a procedure for the numerical modelling of astronomical interferometers, with particular relevance to far-infrared and submillimetre wavelengths. The scheme is based on identifying a set of modes that carry power from the sky to the detector. The procedure is extremely general, and can be used to model scalar or vector fields, in any state of coherence and polarization, the only limitation being that the propagation of a coherent field through the system be described by an integral transform, a constraint that is in practise always met.
We present simulations of ideal, multimode two-dimensional interferometers, and show that the modal theory reproduces the correct behaviour of both Michelson and Fizeau interferometers. We calculate simulated visibility data for a multimode bolometric Michelson interferometer, with a synthesized source, and produce a dirty map, recovering the original source with the usual artefacts associated with interferometers.     

Boundary curves for families of planar orbits

For monoparametric familiesf(x,y)=c of planar orbits, created by a planar potentialV(x,y), we introduce the notion of the family boundary curves (FBC). All members of the familyf(x,y)=c are traced in an allowable region of thexy plane, defined by the corresponding FBC, with total energyE=E(c) varying along the family. Family boundary curves are also found for two-parametric familiesf(x,y,b)=c. The relation of equilibrium points and asymptotic orbits, possibly possessed by the potentialV(x,y), to be FBC is studied.     

Solid bitumens: an assessment of their characteristics, genesis, and role in geological processes

Familiar since antiquity, and subject in contemporary times to various characterization schemes, the exact nature of solid bitumen is not yet fully known. Bitumens have ‘random polymer-like’ molecular structures, are mobile as highly viscous fluids or were once fluids but have since turned into solids. Solid bitumens consist mainly of large moieties, of polyclyclic aromatic hydrocarbons, occasionally with finely admixed, fine-grained cryptocrystalline graphite. Solid bitumens are distinguished from kerogen, which is the syngenetic and generally finely dispersed particulate organic matter in sedimentary rock that virtually does not migrate following its deposition. Occurrences of solid bitumens are relevant to petroleum exploration as well as the search for, and evaluation of, a variety of metallic mineral deposits. Genesis of bitumen is in many cases linked to the thermal and hydrothermal history of organic matter in sedimentary rock. Apparently bitumen, or more specifically organic acids generated along with bitumen during diagenesis, may alter porosity of reservoir rocks or otherwise prepare the ground for ore deposition. Bitumen is also relatively sensitive to alteration processes, some of which, such as oxidative weathering, water leaching, biodegradation (contact) metamorphism and ionizing radiation may likewise affect its nature. Elemental composition of bitumen commonly reflects the nature of mineral deposits. Is is possible that in petroleum exploration, trace metal abundances of bitumen may eventually allow prediction of crude oil types and volumes anticipated from a given source rock? Beside transition elements, notably Ni and V, highly anomalous concentrations of U, Pt and Au occur in some solid bitumens. During the generation of petroleum from kerogen, the trend in δ¹³C is toward lighter values. The opposite seems to occur when liquid petroleum is subjected to thermal cracking (and /or related processes) yielding solid bitumen enriched in ¹³C, and isotopically light methane. In fact, except for deasphalting and possibly some irradiation processes, the result of thermal cracking, oxidation, water leaching, inspissation (drying) and bacterial degradation of crude oil is that lower molecular weight hydrocarbons are removed leaving bitumen residues enriched in aromatic hydrocarbons, heteroatomic compounds (NSO) and ¹³C. Such phenomena are relevant to bitumen paragenesis in petroleum reservoir rocks, to certain Phanerozoic occurrences of multiple generations of bitumens, and to bitumens in mineral deposits.     

HST/NICMOS Observations of M82

The irregular galaxy M82 is known as the archetypal starburst galaxy. Its proximity (3.5 Mpc) makes this galaxy an ideal laboratory for studying the properties of its starburst. The detailed morphology of the [FeII] 1.644 μm and emission Pa_α (at 1.87 μm) is revealed by the NICMOS images. The peak of the 2.2 μm continuum brightness(evolved population) lies very close to the dynamical centre. Most of the Pa_α emission (which traces the young population) is distributed in a ring of star formation (with a `hole' lacking line emission at the centre of the galaxy). These observations support the scenario in which the starburst in M82 is propagating outwards. It has long been suggested that the [FeII] emission in starburst galaxies can be used as a measure of supernova (SN) activity. M82 shows a large number of radio supernova remnants (SNRs), approximately 50, lying in the plane of the galaxy. The comparison of the positions of the bright compact [FeII] emitting regions with the location of the radio SNRs shows that there is no one-to-one spatial correspondence between the two emissions, suggesting that the radio and [FeII] emissions trace two populations of SNRs with different ages. Young (a few hundred years) SNRs are best traced by their radio emission, whereas the [FeII] stage lasts for at least a few 10⁴ yr. The compact [FeII] sources contribute only some 20 % of the total [FeII] emission observed in M82. However, much of the remaining unresolved [FeII] emission in the plane of the galaxy may arise from SNRs that expanded and merged into a general interstellar medium within a few 10⁴ yr. Presumably, as much as 70% of the total extinction-corrected [FeII]1.644 μm in M82 is associated with SNRs. The extended and diffuse [FeII] component in M82 seems to be related with the superwind above and below the disc of the galaxy. This revised version was published online in July 2006 with corrections to the Cover Date.     

High-temperature geothermal reservoir possibilities in Hungary

Theoretical studies have shown the possibility of high-temperature ('high enthalpy') geothermal reservoirs in the pre-Tertiary rocks at 4–5 km depth range within the Pannonian Basin. This expectation was proven by the hotwater/steam blowout of Fábiánsebestyén-4 borehole (16.12.85–31.1.86). Exploration efforts carried out during 1987–88 in the broad vicinity of the borehole proved that reservoirs of this type can be found with the combination of seismic reflection, silica-thermometry and magnetotelluric sounding methods. Deliberate prospection should be continued in all suitable areas within the basin, since high enthalpy reservoirs promise profitable operation of geothermal power stations.     

Integral field spectroscopy with the GEMINI multiobject spectrographs

We describe the integral field unit (IFU) which converts the Gemini Multiobject Spectrograph (GMOS) installed on the Gemini-North telescope to an integral field spectrograph,which produces spectra over a contiguous field of view of 7 × 5 arcsec with spatial sampling of 0.2 arcsecover the wavelength range 0.4-1.0 μm.GMOS is converted to this mode by the remote insertion of the IFU into thebeam in place of the masks used for the multiobject mode. A separate fieldof half the area of the main field, but otherwise identical, is alsoprovided to improve background subtraction. The IFU contains 1500lenslet-coupled fibres and was the first facility of any type for integralfield spectroscopy employed on an 8/10 m telescope.We describe the design, construction and testing of the GMOS IFU and present measurements of the throughput both in the laboratory and at the telescope. We compare these with a theoretical prediction made before construction started. All are in good agreement with each other, with the on-telescope throughput exceeding 60% (averaged over wavelength). Finallywe show an example of data obtained during commissioning to illustrate the power of the device.