Height dependence of the amplitudes of solar oscillations viewed with a potassium resonance scattering spectrometer

Over the course of the year, the variation in the solar line-of-sight velocity causes a change in the heights in the photosphere which are analysed by the red and blue passbands of a resonance scattering spectrometer. This in turn would be expected to produce a variation in the ratio of acoustic amplitudes measured in each passband. Using data from the Tenerife spectrometer of the Birmingham Solar Oscillations Network (BiSON), we demonstrate such a seasonal change. We then use the Eddington-Barbier approximation and an atmospheric model to convert the magnitude of this trend in velocity ratio with line-of-sight velocity into an approximate value of 580 km for the velocity-amplitude scale height. However, a simple argument suggests that Doppler imaging causes this to be an overestimate of the true value.     

Relationship of intertidal surface sediment chlorophyll concentration to hyperspectral reflectance and chlorophyll fluorescence

Estimating biomass of microphytobenthos (MPB) on intertidal mud flats is extremely difficult due to their patchy occurrence, especially at the scale of an entire mud flat. We tested two optical approaches that can be applied in situ: spectral reflectance and chlorophyll fluorescence. These two approaches were applied in 4 European estuaries with different sediment characteristics. At each site, paired replicate measurements of hyperspectral reflectance, chlorophyll fluorescence (after 15 min dark adaptation, F_o ¹⁵), sediment water content, and chlorophylla concentrations were taken (including breakdown products: [chla+phaeo]). Sediments were further characterized by grain size and organic content analysis. The spectral signatures of tidal flats dominated by benthic microalgae, mainly diatoms, could be easily distinguished from sites dominated by macrophytes; we present a 3 waveband algorithm that can be used to detect the presence of macrophytes. The normalized difference vegetation index (NDVI) was found to be most strongly correlated to sediment [chla+phaeo], except for the predominantly sandy Sylt stations. F_o ¹⁵ was also significantly correlated to sediment [chla+phaeo] in all but one grid (Sylt grid A). Our results suggest that the functional relationships (i.e., the slopes) between NDVI or fluorescence and [chla+ phaeo] were not significantly different in the muddier grids, although the intercepts could differ significantly, especially for F_o ¹⁵. This suggests a mismatch of the optical depth seen by the reflectometer or fluorometer and the depth sampled for pigment analysis. NDVI appears to be a robust proxy for sediment [chla+phaeo] and can be used to quantify MPB biomass in muddy sediments of mid latitude estuaries.     

Quality Assessment Of Digital Surface Models Generated From IKONOS Imagery

The growing applications of digital surface models (DSMs) for object detection, segmentation and representation of terrestrial landscapes have provided impetus for further automation of 3D spatial information extraction processes. While new technologies such as lidar are available for almost instant DSM generation, the use of stereoscopic high-resolution satellite imagery (HRSI), coupled with image matching, affords cost-effective measurement of surface topography over large coverage areas. This investigation explores the potential of IKONOS Geo stereo imagery for producing DSMs using an alternative sensor orientation model, namely bias-corrected rational polynomial coefficients (RPCs), and a hybrid image-matching algorithm. To serve both as a reference surface and a basis for comparison, a lidar DSM was employed in the Hobart testfield, a region of differing terrain types and slope. In order to take topographic variation within the modelled surface into account, the lidar strip was divided into separate sub-areas representing differing land cover types. It is shown that over topographically diverse areas, heighting accuracy to better than 3 pixels can be readily achieved. Results improve markedly in feature-rich open and relatively flat terrain, with sub-pixel accuracy being achieved at check points surveyed using the global positioning system (GPS). This assessment demonstrates that the outlook for DSM generation from HRSI is very promising.     

Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.     

Method of Data Reduction and Uncertainty Estimation for Platinum-Group Element Data Using Inductively Coupled Plasma-Mass Spectrometry

A data reduction method is described for determining platinum-group element (PGE) abundances by inductively coupled plasma-mass spectrometry (ICP-MS) using external calibration or the method of standard addition. Gravimetric measurement of volumes, the analysis of reference materials and the use of procedural blanks were all used to minimise systematic errors. Internal standards were used to correct for instrument drift. A linear least squares regression model was used to calculate concentrations from drift-corrected counts per second (cps). Furthermore, mathematical manipulations also contribute to the uncertainty estimates of a procedure. Typical uncertainty estimate calculations for ICP-MS data manipulations involve: (1) Carrying standard deviations from the raw cps through the data reduction or (2) calculating a standard deviation from multiple final concentration calculations. It is demonstrated that method 2 may underestimate the uncertainty estimate of the calculated data. Methods 1 and 2 do not typically include an uncertainty estimate component from a regression model. As such models contribute to the uncertainty estimates affecting the calculated data, an uncertainty estimate component from the regression must be included in any final error calculations. Confidence intervals are used to account for uncertainty estimates from the regression model. These confidence intervals are simpler to calculate than uncertainty estimates from method 1, for example. The data reduction and uncertainty estimation method described here addresses problems of reporting PGE data from an article in the literature and addresses both precision and accuracy. The method can be applied to any analytical technique where drift corrections or regression models are used.     

A Reappraisal of Rb, Y, Zr, Pb and Th Values in Geochemical Reference Material BHVO-1

The geochemical reference material BHVO-1 was analysed by a variety of techniques over a six year period. These techniques included inductively coupled plasma-mass spectrometry and atomic emission spectroscopy (ICP-MS and ICP-AES, respectively), laser ablation ICP-MS and spark source mass spectroscopy. Inconsistencies between the published consensus values reported by Gladney and Roelandts (1988, Geostandards Newsletter) and the results of our study are noted for Rb, Y, Zr, Pb and Th. The values reported here for Rb, Y, Zr and Pb are generally lower, while Th is higher than the consensus value. This is not an analytical artefact unique to the University of Notre Dame ICP-MS facility, as most of the BHVO-1 analyses reported over the last ten to twenty years are in agreement with our results. We propose new consensus values for each of these elements as follows: Rb = 9.3 ± 0.2 μg g-1 (compared to 11 ± 2 μg g-1), Y = 24.4 ± 1.3 μg g-1 (compared to 27.6 ± 1.7 μg g-1), Zr = 172 ± 10 μg g-1 (compared to 179 ± 21 μg g-1), Pb = 2.2 ± 0.2 μg g-1 (compared to 2.6 ± 0.9 μg g-1) and Th = 1.22 ± 0.02 μg g-1 (compared to 1.08 ± 0.15 μg g-1).     

Characterisation of Memory Effects and Development of an Effective Wash Protocol for the Measurement of Petrogenetically Critical Trace Elements in Geological Samples by ICP-MS

High sensitivity and low detection limits would seem to make inductively coupled plasma-mass spectrometry (ICP-MS) an ideal analytical tool for determining low (sub-μg g^-1) concentrations of the rare earth elements (REE), Y, Zr, Nb, Hf, Ta, Sn, W, Mo, Th, and U in most mafic materials (e.g. Hall and Plant 1992). However, the generally "sticky" nature exhibited by most of the high field strength elements (HFSEs: Zr, Nb, Hf, Ta, Th and U) as well as Sn, W and Mo can result in spurious results due to memory effects transmitted between unknowns and calibration samples. This, in turn, can seriously compromise the sensitivity, accuracy, and precision of ICP-MS analyses for these elements in geological materials. Data resulting from analyses with poor accuracy and precision can lead to erroneous interpretation and misleading petrogenetic modelling. To resolve this problem, we propose an effective wash protocol for these critical trace elements.     

Regional and temporal changes in epizoobiontic bryozoan-communities of Flustra foliacea (Linnaeus, 1758) and implications for North Sea ecology

Until recently, bryozoans have not been used as indicators for changes in bottom communities or climate control in the North Sea Basin, despite a 200-year history of bryozoan collecting. The epizoobiontic bryozoan fauna of Flustra foliacea (Linnaeus, 1758) was analysed on 51 sample stations kept in four German museums. The samples cover the entire North Sea and different time periods (1776–2008, mainly the period of 1904/1905 compared to 1980–87). Cluster analysis shows a differentiation into a northern and a southern North Sea assemblage. The northern assemblage is characterized by Amphiblestrum flemingii (Busk, 1854), Callopora dumerilii (Audouin, 1826) and Tricellaria ternata (Ellis & Solander, 1786), while the southern North Sea is characterized by Electra pilosa (Linnaeus, 1767), Crisia eburnea (Linnaeus, 1758) and Plagioecia patina (Lamarck, 1816). Spatial separation approximately follows the 50 m depth contour. The temporal distribution patterns of bryozoans are discussed in terms of NAO (North Atlantic Oscillation) and temperature variations.