Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Fast genetic mapping in barley: case studies of cuticle mutants using RNA-sequencing

Barley(Hordeum vulgare L.) is one of the earliest domesticated crop species and ranked as the fourth largest cereal production worldwide. Forward genetic studies in barley have greatly advanced plant genetics during the last century; however, most genes are identified by the conventional mapping method. Array genotyping and exome-capture sequencing have also been successfully used to target the causal mutation in barley populations, but these techniques are not widely adopted because of associated costs and partly due to the huge genome size of barley. This review summarizes three mapping cases of barley cuticle mutants in our laboratory with the help of RNA-sequencing. The causal mutations have been successfully identified for two of them and the target genes are located in the pericentromeric regions. Detailed information on the mapping-by-sequencing, mapping-and-sequencing, and RNA-sequencing assisted linkage mapping are presented and some limitations and challenges on the mapping assisted by RNA sequencing are also discussed. The alternative and elegant methods presented in this review may greatly accelerate forward genetics of barley mapping, especially for laboratories without large funding.     

抽油机悬点投影测量仪

油田抽油机的抽油杆幌动幅度过大，是引起抽油杆断裂的一个重要因素，检测这种幌动幅度是防止抽油杆断裂的一种有效手段。设计了一种基于面阵CCD和普通半导体激光器（LD）测量这种幌动的悬点投影测量方法，通过数字卷积滤波，达到了范围为0－40mm，误差＜0.2mm的技术检测指标。     

一次西南低涡过程的地面场中尺度分析

本文运用带通滤波分析方法,对四川省1981年7月由西南低涡等天气系统引起的大暴雨过程作了地面气象要素场的中尺度诊断分析。结果表明,带通滤波后的场具有明显的中尺度特征,其中一些物理量场的适当配置与6小时后的暴雨中心有较好的对应关系。说明了此带通滤波方法在实际业务预报中具有一定的使用价值。     

长江中下游地区地下水卤素元素的形成及其分布规律

本文以丰富的实际资料，论证了地下水的卤素元素（F、Cl、Br、I）的形成、含量及其分布规律与含水介质成分、上覆岩土性质、地下水退流条件、氧化还原环境、地下水矿化度之间的关系。根据江汉平原东部区和鄱阳湖区地下水中Br、I元素的调查研究结果及它们形成的控制因素与分布规律，结合长江三角洲南部区水文地球化学环境条件分析对比，指出该区是一个形成Br、I矿泉水的有利地区。     

SDSS J143030.22-001115.1： A Misclassified Narrow-line Seyfert 1 Galaxy with Flat X-ray Spectrum

We used multi-component profiles to model the Hβ and [OⅢ]λλ4959,5007 lines of SDSS J143030.22-001115.1, a narrow-line Seyfert 1 galaxy (NLS1) in a sample of 150 NLS1 candidates selected from the Sloan Digital Sky Survey (SDSS), Early Data Release (EDR). After subtracting the Hβ contribution from narrow line regions (NLRs), we found that its full width half maximum (FWHM) of broad Hβ line is nearly 2900km s~(-1) , significantly larger than the customarily adopted criterion of 2000 km s~(-1) . With its weak Fe Ⅱ multiples, we believe that SDSS J143030.22-001115.1 should not be classified as a genuine NLS1. When we calculate the virial black hole masses of NLS1s, we should use the Hβ linewidth after subtracting the NLR component.     

Multistep matched-field inversion for broad-band data from ASIAEX2001

This paper discusses the results of geoacoustic inversion carried out using explosive charge data from the Asian Seas International Acoustic Experiment (ASIAEX) East China Sea (ECS) Experiment. A multifrequency incoherent matched-field inversion processor and a genetic algorithm (GA) are used for the inversion. A multistep matched field inversion approach is presented, which makes use of the varying sensitivities of wave fields at various frequencies to reduce the inversion problem into a sequence of smaller inversions with fewer unknowns to estimate at each stage. Different parameters are estimated using data at different frequencies according to their sensitivities. Inversion results for different areas in the ECS region are summarized and compared with core data.     

淮山提取液替代羧甲基纤维素钠作为酸奶稳定剂的效果研究

采用正交试验等方法对淮山提取液（DB-Ext）代替羧甲基纤维素钠(CMC)作为调配型酸奶稳定剂的效果进行了初步探讨。结果表明以原料的6.0倍水量在110℃的温度条件下，提取40min，所得的淮山提取液的粘度为3500mPa     

右江复合盆地的沉积特征及其构造演化

位于华南褶皱带南缘的右江盆地,其发展可分为两个不同的阶段。它的轮廓和结构,与NW向及NE向同沉积断裂关系密切。盆地内的沉积物,分别由特征不同的非补偿性和补偿性沉积相组成两个双层结构。盆地内火山活动发育,也明显的分为两个阶段。海西期,古特提斯洋的发展使哀牢山洋盆开裂,导致了右江地区在拉张应力条件下出现若干NW向裂陷带,这时的盆地具有大陆边缘裂谷特点。东吴运动后开始的印支期,区域应力条件发生变化。滨大平洋构造的发生,使盆地轮廓和结构发生明显变化,与此同时开始的哀牢山洋盆向NE方向的俯冲消减作用,使盆地在新的挤压条件下再次发生张裂和拗陷。进入了弧后盆地发展阶段。印支期末,盆地封闭。     

图象的模型及其统计特性

本文对图象的统计特性及其适用模型作了分析。讨论了以前常用的平稳图象模型的缺陷,对实际图象的统计特性作了分析,认为它是非平稳的,不满足各态历经性,同时在空间上是高度相关的;讨论了相应的随机参数统计模型和描述性统计模型。指出作用于整幅图象的“全局”图象复原算法比每次只独立计算单个象元的“点”图象复原算法更为优越。