Inclusions of silicate and sulfate melts in chrome diposide from the Inagli deposit,Yakutia, Russia

Melt inclusions were studied in chrome diopside from the Inagli deposit of gemstones in the Inagli massif of alkaline ultrabasic rocks of potassic affinity in the northwestern Aldan shield, Yakutia, Russia. The chrome diopside is highly transparent and has an intense green color. Its Cr₂O₃ content varies from 0.13 to 0.75 wt %. Primary and primary-secondary polyphase inclusions in chrome diopside are dominated by crystal phases (80–90 vol %) and contain aqueous solution and a gas phase. Using electron microprobe analysis and Raman spectroscopy, the following crystalline phases were identified. Silicate minerals are represented by potassium feldspar, pectolite [NaCa₂Si₃O₈(OH)], and phlogopite. The most abundant minerals in the majority of inclusions are sulfates: glaserite (aphthitalite) [K₃Na(SO₄)₂], glauberite [Na₂Ca(SO₄)₂], aluminum sulfate, anhydrite (CaSO₄), gypsum (CaSO₄ × 2H₂O), barite (BaSO₄), bloedite [Na₂Mg(SO₄)₂ × 4H₂O], thenardite (NaSO₄), polyhalite [K₂Ca₂Mg(SO₄)₄ × 2H₂O], arcanite (K₂SO₄), and celestite (SrSO₄). In addition, apatite was detected in some inclusions. Chlorides are probably present among small crystalline phases, because some analyses of aggregates of silicate and sulfate minerals showed up to 0.19–10.3 wt % Cl. Hydrogen was identified in the gas phase of polyphase inclusions by Raman spectroscopy. The composition of melt from which the chrome diopside crystallized was calculated on the basis of the investigation of silicate melt inclusions. This melt contains 53.5 wt % SiO₂, considerable amounts of CaO (16.3 wt %), K₂O (7.9 wt %), Na₂O (3.5 wt %), and SO₃ (1.4 wt %) and moderate amounts of Al₂O₃ (7.5 wt %), MgO (5.8 wt %), FeO (1.1 wt %), and H₂O (0.75 wt %). The content of Cr₂O₃ in the melt was 0.13 wt %. Many inclusions were homogenized at 770–850°C, when all of the crystals and the gas phase were dissolved. The material of inclusions heated up to the homogenization temperature became heterogeneous even during very fast quenching (two seconds) producing numerous small crystals. This fact implies that most of the inclusions contained a salt (rather than silicate) melt of sulfate-dominated composition. Such inclusions were formed from salt globules (with a density of about 2.5 g/cm³) occurring as an emulsion in the denser (2.6 g/cm³) silicate melt from which the chrome diopside crystallized.     

Chemical composition,volatile components,and trace elements in melts of the Karymskii volcanic center,Kamchatka, and Golovnina volcano,Kunashir Island: Evidence from inclusions in minerals

Melt inclusions were examined in phenocrysts in basalt, andesite, dacite, and rhyodacite from the Karymskii volcanic center in Kamchatka and dacite form Golovnina volcano in Kunashir Island, Kuriles. The inclusions were examined by homogenization and by analyzing glasses in more than 80 inclusions on an electron microscope and ion microprobe. The SiO₂ concentrations in the melt inclusions in plagioclase phenocrysts from basalts from the Karymskii volcanic center vary from 47.4 to 57.1 wt %, these values for inclusions in plagioclase phenocrysts from andesites are 55.7–67.1 wt %, in plagioclase phenocrysts from the dacites and rhyodacites are 65.9–73.1 wt %, and those in quartz in the rhyodacites are 72.2–75.7 wt %. The SiO₂ concentrations in melt inclusions in quartz from dacites from Golovnina volcano range from 70.2 to 77.0 wt %. The basaltic melts are characterized by usual concentrations of major components (wt %): TiO₂ = 0.7–1.3, FeO = 6.8–11.4, MgO = 2.3–6.1, CaO = 6.7–10.8, and K₂O = 0.4–1.7; but these rocks are notably enriched in Na₂O (2.9–7.4 wt % at an average of 5.1 wt %, with the highest Na₂O concentration detected in the most basic melts: SiO₂ = 47.4–52.0 wt %. The concentrations of volatiles in the basic melts are 1.6 wt % for H₂O, 0.14 wt % for S, 0.09 wt % for Cl, and 50 ppm for F. The andesite melts are characterized by high concentrations (wt %) of FeO (6.5 on average), CaO (5.2), and Cl (0.26) at usual concentrations of Na₂O (4.5), K₂O (2.1), and S (0.07). High water concentrations were determined in the dacite and rhyodacite melts: from 0.9 to 7.3 wt % (average of 15 analyses equals 4.5 wt %). The Cl concentration in these melts is 0.15 wt %, and those of F and S are 0.06 and 0.01 wt %, respectively. Melt inclusions in quartz from the dacites of Golovnina volcano are also rich in water: they contain from 5.0 to 6.7 wt % (average 5.6 wt %). The comparison of melt compositions from the Karymskii volcanic center and previously studied melts from Bezymyannyi and Shiveluch volcanoes revealed their significant differences. The former are more basic, are enriched in Ti, Fe, Mg, Ca, Na, and P but significantly depleted in K. The melts of the Karymskii volcanic center are most probably less differentiated than the melts of Bezymyannyi and Shiveluch volcanoes. The concentrations of water and 20 trace elements were measured in the glasses of 22 melt inclusions in plagioclase and quartz from our samples. Unusually high values were obtained for Li concentrations (along with high Na concentrations) in the basaltic melts from the Karymskii volcanic center: from 118 to 1750 ppm, whereas the dacite and rhyolite melts contain 25 ppm Li on average. The rhyolite melts of Golovnina volcano are much poorer in Li: 1.4 ppm on average. The melts of the Karymskii volcanic center are characterized by relative minima at Nb and Ti and maxima at B and K, as is typical of arc magmas.     

Remote sensing and surface POC concentration in the South Atlantic

Several SeaWiFS products have been compared with shipboard data to assess the possibility of using remote sensing to estimate particulate organic carbon (POC) concentration in surface waters. Transmissometer data were collected during six South Atlantic Ventilation Experiment (SAVE) hydrographic expeditions conducted between November 1987 and March 1989 from R/V Knorr, and Melville. A total of 361 beam attenuation profiles were made with a SeaTech transmissometer interfaced with a CTD/rosette. In order to calculate the POC concentration from transmissometer profiles, a regression between beam attenuation and POC for open Atlantic Ocean waters derived from our research in the North Atlantic (North Atlantic Bloom Experiment, NABE) and enhanced by data from the Bermuda Atlantic Time Series Station (BATS) was applied. The profiles were processed and examined as vertical sections of the surface 250 m. The data were collected in two successive years, during the same season, which allowed us to compile a combined data set over the austral summer for examination. Beam attenuation/POC concentrations were integrated down to one attenuation depth with the intent of making comparisons with satellite optical data. No satellite optical data were available for 1987–1989, so the only option was to compare our integrated data with SeaWiFS-derived variables from later years averaged over the same season as SAVE data. Analysis of four SeaWiFS products acquired from 1997 to 2002 demonstrated very low variations from year to year for seasonally averaged data, suggesting that making comparisons of the beam attenuation/POC fields with averaged satellite optical products from later years is a valid (though not optimal) approach for this area. The highest correlation between beam attenuation/POC concentration and remotely derived products was found with normalized water-leaving radiance at 555 nm. Other SeaWiFS-derived variables—chlorophyll concentration, diffuse attenuation coefficient at 490 nm and integral chlorophyll (integrated over one attenuation depth)—were also compared but showed a slightly less satisfactory correlation.     

Silicate and salt melts in the genesis of the industrial’noe tin deposit: Evidence from inclusions in minerals

The data obtained on melt and fluid inclusions in minerals of granites, metasomatic rocks, and veins with tin ore mineralization at the Industrial’noe deposit in the southern part of the Omsukchan trough, northeastern Russia, indicate that the melt from which the quartz of the granites crystallized contained globules of salt melts. Silicate melt inclusions were used to determine the principal parameters of the magmatic melts that formed the granites, which had temperatures at 760–1020°C, were under pressures of 0.3–3.6 kbar, and had densities of 2.11–2.60 g/cm³ and water concentrations of 1.7–7.0 wt %. The results obtained on the fluid inclusions testify that the parameters of the mineral-forming fluids broadly varied and corresponded to temperatures at 920–275°C, pressures 0.1–3.1 kbar, densities of 0.70–1.90 g/cm³, and salinities of 4.0–75.0 wt % equiv. NaCl. Electron microprobe analyses of the glasses of twelve homogenized inclusions show concentrations of major components typical of an acid magmatic melt (wt %, average): 73.2% SiO₂, 15.3% Al₂O₃, 1.3% FeO, 0.6% CaO, 3.1% Na₂O, and 4.5% K₂O at elevated concentrations of Cl (up to 0.51 wt %, average 0.31 wt %). The concentrations and distribution of some elements (Cl, K, Ca, Mn, Fe, Cu, Zn, Pb, As, Br, Rb, Sr, and Sn) in polyphase salt globules in quartz from both the granites and a mineralized miarolitic cavity in granite were assayed by micro-PIXE (proton-induced X-ray emission). Analyses of eight salt globules in quartz from the granites point to high concentrations (average, wt %) of Cl (27.5), Fe (9.7), Cu (7.2), Mn (1.1), Zn (0.66), Pb (0.37) and (average, ppm) As (2020), Rb (1850), Sr (1090), and Br (990). The salt globules in the miarolitic quartz are rich in (average of 29 globules, wt %) Cl (25.0), Fe (5.4), Mn (1.0), Zn (0.50), Pb (0.24) and (ppm) Rb (810), Sn (540), and Br (470). The synthesis of all data obtained on melt and fluid inclusions in minerals from the Industrial’noe deposit suggest that the genesis of the tin ore mineralization was related to the crystallization of acid magmatic melts. Original Russian Text@ V.B. Naumov, V.S. Kamenetsky, 2006, published in Geokhimiya, 2006, No. 12, pp. 1279–1289.     

Impact of the North Atlantic Oscillation on Middle Eastern Climate and Streamflow

Interannual to decadal variations in Middle Eastern temperature, precipitationand streamflow reflect the far-field influence of the North Atlantic Oscillation (NAO), a dominant mode of Atlantic sector climate variability. Using a new sea surface temperature (SST) based index of the NAO and availablestreamflow data from five Middle Eastern rivers, we show that the first principal component of December through March streamflow variability reflects changes in the NAO. However, Middle East rivers have two primary flooding periods.The first is rainfall-driven runoff from December through March, regulated on interannual to decadal timescales by the NAO as reflected in local precipitation and temperature.The second period, from April through June, reflects spring snowmelt and contributes in excess of 50% of annual runoff.This period, known locally as the khamsin, displays no significantNAO connections and a less direct relationship with local climatic factors, suggesting that streamflow variability during this period reflects land-cover change, possibly related to agriculture and hydropower generation, and snowmelt.     

Amplitude—Phase Characteristics of the Annual Cycle of Surface Air Temperature in the Northern Hemisphere

The amplitude-phase characteristics(APC)of surface air temperature(SAT)annual cycle(AC)in the Northern Hemisphere are analyzed.From meteorological observations for the 20th century and meteorological reanalyses for its second half,it is found that over land negative correlation of SAT ACamplitude with annual mean SAT dominates.Nevertheless,some exceptions exist.The positive correlationbetween these two variables is found over the two desert regions:in northern Africa and in Central America.Areas of positive correlations are also found for the northern Pacific and for the tropical Indian and PacificOceans.Southward of the characteristic annual mean snow-ice boundary (SIB) position,the shape ofthe SAT AC becomes more sinusoidal under climate warming.In contrast,northward of it,this shapebecomes less sinusoidal.The latter iS also found for the above-mentioned two desert regions.In theFar East(southward of about 50°N),the SAT AC shifts as a whole:here its spring and autumn phasesoccur earlier if the annual     

Prolonged postcollisional shoshonitic magmatism in the southern Svecofennian domain – a case study of the Åva granite–lamprophyre ring complex

The Åva ring complex is one of four Paleoproterozoic postcollisional shoshonitic ring complexes in southwestern Finland. It is composed of ring dykes of K-feldspar megacryst-bearing granite, mingled in places with a shoshonitic monzonite, and lamprophyre dykes crosscutting all the rocks in a radial pattern. A survey was undertaken to trace the magma chamber beneath the ring complex to date it and measure some intensive parameters to clarify the crystallisation conditions at depth before the granite was emplaced in the upper crust. Mineral separates were extracted from the core zones of K-feldspar megacrysts in the granite, heavy mineral fractions (including zircons) from these separates were used for P-T assessment and age determinations, and the results were compared to data obtained from bulk rock samples. It appears that magma differentiation took place in a midcrustal magma chamber (at 4 to 7 kbar) possibly 30 Ma before the emplacement of the ring complex in the upper crust (deep assemblage 1790 Ma, shallow assemblage 1760 Ma). Relatively high activity of the alkalies and a low oxygen fugacity characterised the midcrustal chamber. The juvenile Svecofennian crust was invaded by shoshonitic magmas from an enriched lithospheric mantle over a long period of time. Some of these magmas were stored and differentiated in the middle crust before transportation to the upper crust. The results also show that coarse-grained granites may provide evidence for several magmatic evolutionary episodes, e.g., differentiation and crystallisation in different environments prior to final emplacement.     

Disseminated gold–sulfide mineralization at the Zhaima deposit,eastern Kazakhstan

The Zhaima gold–sulfide deposit is located in the northwestern part of the West Kalba gold belt in eastern Kazakhstan. The mineralization is hosted in Lower Carboniferous volcanic and carbonate rocks formed under conditions of marginal-sea and island-arc volcanic activity. The paper considers the mineralogy and geochemistry of primary gold–sulfide ore and Au-bearing weathering crusts. Au-bearing arsenopyrite–pyrite mineralization formed during only one productive stage. Disseminated, stringer–disseminated, and massive rocks are enriched in Ti, Cr, V, Cu, and Ni, which correspond to the mafic profile of basement. The main ores minerals are represented by finely acicular arsenopyrite containing Au (up to few tens of ppm) and cubic and pentagonal dodecahedral pyrite with sporadic submicroscopic inclusions of native gold. The sulfur isotopic composition of sulfides is close to that of the meteoritic standard (δ³⁴S =–0.2 to +0.2). The ⁴⁰Ar/³⁹Ar age of three sericite samples from ore veinlets corresponds to the Early Permian: 279 ± 3.3, 275.6 ± 2.9, and 272.2 ± 2.9 Ma. The mantle source of sulfur, ore geochemistry, and spatial compatibility of mineralization with basic dikes allow us to speak about the existence of deep fluid–magmatic systems apparently conjugate with the Tarim plume.