Three‐dimensional structures and elemental distributions of Stardust impact tracks using synchrotron microtomography and X‐ray fluorescence analysis

Abstract— Three‐dimensional structures and elemental abundances of four impact tracks in silica aerogel keystones of Stardust samples from comet 81P/Wild 2 (bulbous track 67 and carrot‐type tracks 46, 47, and 68) were examined non‐destructively by synchrotron radiation‐based microtomography and X‐ray fluorescence analysis. Track features, such as lengths, volumes and width as a function of track depth, were obtained quantitatively by tomography. A bulbous portion was present near the track entrance even in carrot‐type tracks. Each impact of a cometary dust particle results in the particle disaggregated into small pieces that were widely distributed on the track walls as well as at its terminal. Fe, S, Ca, Ni, and eight minor elements are concentrated in the bulbous portion of track 68 as well as in terminal grains. It was confirmed that bulbous portions and thin tracks were formed by disaggregation of very fine fragile materials and relatively coarse crystalline particles, respectively. The almost constant ratio of whole Fe mass to track volume indicates that the track volume is almost proportional to the impact kinetic energy. The size of the original impactor was estimated from the absolute Fe mass by assuming its Fe content (CI) and bulk density. Relations between the track sizes normalized by the impactor size and impact conditions are roughly consistent with those of previous hypervelocity impact experiments.     

Evaluating ecological quality in the north-eastern Black Sea coastal zone

Anthropogenic pressures have resulted in measurable impacts on the coastal ecosystems of the northern (Sevastopol Bay, Ukraine) and eastern (Batumi aquatoria, Georgia) Black Sea. Indices suggest that major impacts are relatively localized and are comparable to similar situations in the northern Atlantic. In contrast, biodiversity was appreciably lower than from comparable north Atlantic waters. The number of macrobenthic species was typically round 50, less than half the number that might be expected from similar exercises in US or European waters. Site-specific indices likewise indicated a somewhat lower diversity within communities, yielding metrics which would indicate a measure of stress in N. Atlantic situations. Microbial status was generally good, although regions close to urbanisation did not comply with standards laid down in the current EC Bathing Water Directive (76/EC/160). Likewise viruses were more commonly, although not exclusively, associated with urban locations, as were phages. Microbial investigation of the sediments confirmed the presence of heterotrophic and oil-oxidising bacteria. Abundance of the latter was closely correlated to the degree of oil contamination of the sediments, and to temperature, although for both, the results showed that the increase in bacterial abundance did level off beyond a certain point. Numbers of oil-oxidising bacteria in the water column displayed a classical response to temperature, with abundance doubling over a 10-degree C rise in temperature. Overall the results suggest that while indices in current use are useful in evaluating coastal quality in the Black Sea, some adjustments would be necessary especially in the establishment of baseline or reference values.     

Formation processes of compound chondrules in CV3 carbonaceous chondrites: Constraints from oxygen isotope ratios and major element concentrations

We found thirty compound chondrules in two CV3 carbonaceous chondrites. The abundance in each meteorite relative to single chondrules is 29/1846 (1.6%) in Allende and 1/230 (0.4%) in Axtell. We examined petrologic features, major element concentrations and oxygen isotopic compositions. Textural, compositional and isotopic evidence suggests that multiple, different mechanisms are responsible for the formation of compound chondrules.Seven compound chondrules are composed of two conjoined porphyritic chondrules with a blurred boundary. At the boundary region of this type of compounds, a poikilitic texture is commonly observed. This suggests that the two chondrules were melted when they came to be in contact. On the other hand, seventeen compound chondrules consist of two conjoined chondrules with a discrete boundary. The preservation of spherical boundary planes of an earlier-formed chondrule of this type implies that it already solidified before fusing with a later-formed chondrule that was still melted. Six samples out of 17 compound chondrules of this type are composed of two BO chondrules. The BO-BO compound chondrules have a unique textural feature in common: the directions of the barred olivines are mostly parallel between two chondrules. This cannot be explained by a simple collision process and forces another mechanism to be taken into consideration.The remaining six compound chondrules differ from the others; they consist of an earlier-formed chondrule enclosed by a later-formed chondrule. A large FeO enrichment was observed in the later-formed chondrules and the enrichment was much greater than that in the later-formed chondrules of other types of compounds. This is consistent with the relict chondrule model, which envisages that the later-formed chondrule was made by a flash melting of a porous FeO-rich dust clump on an earlier-formed chondrule. The textural evidence of this type of compound shows that the earlier-formed chondrule has melted again to varying degrees at the second heating event. This implies that FeO concentrations in bulk chondrules increases during the second heating event if an earlier-formed chondrule was totally melted together with the FeO-rich dust aggregates.Silicate minerals such as olivine and low-Ca pyroxene in compound chondrules have oxygen isotope compositions similar to those in single chondrules from CV3 chondrites. The oxygen isotope composition of each part of the compound chondrule is basically similar to their chondrule pair, but silicates in some chondrules show varying degrees of ¹⁶O-enrichment down to −15‰ in δ¹⁸O, while those in their partners have ¹⁶O-poor invariable compositions near 0 ‰ in δ¹⁸O. This implies that the two chondrules in individual compounds formed in the same environments before they became conjoined and the heterogeneous oxygen isotope compositions in some chondrules resulted from incomplete exchange of oxygen atoms between ¹⁶O-rich chondrule melts and ¹⁶O-poor nebular gas.     

An initial response of magnetic fields at geosynchronous orbit to Pi 2 onset as observed from the dip-equator

Fluxgate magnetometer data recorded at the dip-equator (Huancayo, Peru; 1.44°N, 355.9° in geomagnetic coordinates; 12.1°S, 75.2°W in geographic coordinates; L = 1.00) with higher accuracy of timing (0.1 s) and amplitude resolution (0.01 nT) were utilized to survey an onset of Pi 2 pulsations in the midnight sector (2100–0100 LT) during PROMIS (Polar Region and Outer Magnetosphere International Study) periods (1 March–20 June, 1986). It is found that changing field line magnitude and vector as observed by magnetometer on board the synchronous satellites in the midnight sector often takes place simultaneously with the onset of Pi 2 pulsations at the dip-equator. The field disturbances that follow thereafter tend to last for some time both at the geosynchronous altitudes and the dip-equator. In this report, we examine the initial response of the field lines in space, and attempt to classify how the field line vector changed in the meridional plane.     

ArcGIS与SAS地统计分析方法应用于美国县区人口加权月温度估算的比较(英文)

气温变化对人群健康有重要的影响。通过对美国县区人口加权的月平均温度的准确估计可以用于气温与人群健康行为以及疾病的关联关系研究,如基于以县区为单位的抽样或者报告数据。针对气温的估计,多数学者都采用ArcGIS软件,很少使用SAS这一统计软件。本文比较了两种地统计模型的性能,并在同一个CITGO平台上采用ArcGIS9.3和SAS9.2工具软件估算全美48个州县区月平均温度。来自全美5435个气温监测站点2007年1-12月的平均温度和站点的海拔高度被用于估算县区人口中心点的温度,其中海拔数据是作为协变量。通过调整决定系数R2、均方误差、均方根误差和处理时间等指标来比较模型的效能。在ArcGIS中独立验证预测准确性在11个月中都达到90%以上,SAS中12个月均达到90%以上。与ArcGIS协同克里格相比,SAS协同克里格插值能获得更高的准确性和较低的偏差。两个软件包对于县区水平的气温估计值呈现正相关(调整R2在0.95-0.99之间);通过引入海拔高度作为协变量,使准确性和精确性都得以改善。两种方法对于美国县区层面的气温估计都是可靠的,但ArcGIS在空间数据前期处理和处理时间上的优势,尤其在涉及多年或者多个州的项目中是软件选择上的重要考虑。     

Numerical modelling of internal erosion during hydrate dissociation based on multiphase mixture theory

It has been reported that sand production, which is a simultaneous production of soil particles along with gas and water into a production well, forced to terminate the operation during the world's first offshore methane production test from hydrate-bearing sediments in the Eastern Nankai Tough. The sand production is induced by internal erosion, which is the detachment and migration of soil particles from soil skeleton due to seepage flow. The inflow of the eroded soil particles into the production well leads to damage of the production devices. In the present study, a numerical model to predict the chemo-thermo-mechanically coupled behavior including internal erosion during hydrate dissociation has been formulated based on the multiphase mixture theory. In the proposed model, the internal erosion is expressed as mass transition of soil particles from soil skeleton to the fluidized soil particles. Since the internal erosion is considered to depend on the soil particle size, mass of soil particles are divided into several groups that have different representative particle diameters, and the constitutive equations for the onset condition and the mass transition rate of the internal erosion are formulated for each group. Also, transportation of soil particles in the liquid phase is formulated for each particle size group in the proposed model. Finally, a simulation of the methane gas production from the hydrate-bearing sediment by depressurization method is presented, and the internal erosion and the dissociation behavior are discussed.     

Chemo‐thermo‐mechanically coupled seismic analysis of methane hydrate‐bearing sediments during a predicted Nankai Trough Earthquake

In the present study, we have developed a numerical method which can simulate the dynamic behaviour of a seabed ground during gas production from methane hydrate‐bearing sediments. The proposed method can describe the chemo‐thermo‐mechanical‐seismic coupled behaviours, such as phase changes from hydrates to water and gas, temperature changes and ground deformation related to the flow of pore fluids during earthquakes. In the first part of the present study, the governing equations for the proposed method and its discretization are presented. Then, numerical analyses are performed for hydrate‐bearing sediments in order to investigate the dynamic behaviour during gas production. The geological conditions and the material parameters are determined using the data of the seabed ground at Daini‐Atsumi knoll, Eastern Nankai Trough, Japan, where the first offshore production test of methane hydrates was conducted. A predicted earthquake at the site is used in the analyses. Regarding the seismic response to the earthquake which occur during gas production process, the wave profiles of horizontal acceleration and horizontal velocity were not extensively affected by the gas production. Hydrate dissociation behaviour is sensitive to changes in the pore pressure during earthquakes. Methane hydrate dissociation temporarily became active in some areas because of the main motion of the earthquake, then methane hydrate dissociation brought about an increase in the average pressure of the fluids during the earthquake. And, it was this increase in average pore pressure that finally caused the methane hydrate dissociation to cease during the earthquake. Copyright © 2016 John Wiley & Sons, Ltd.     

Sea level variation in the eastern Asia

Mean sea level variations in the eastern Asia region during 1950 to 1991 are investigated with the use of observed sea level data at 16 stations. It is suggested from the data analysis, that the main cause of long-term sea level variation in this region may be the plate tectonic processes. The mean sea levels along the eastern coasts of Japan and the Philippines, and that along the southern coast of Indonesia have risen due to the subsidence of Pacific, Philippine and Australian plates under the Eurasian plate, respectively. On the other hand, the mean sea levels along the western coasts of Japan and the Philippines, and that along the northern coast of Indonesia have fallen. The distribution map of mean sea level rise at the year 2030 from 1985 in this region is presented on the basis of the results of this work and IPCC (1990).