Wave drift enhancement effects in multi column structures

A theoretical assessment is made of mean wave drift forces on groups of vertical circular cylinders, such as the columns of a floating offshore platform. A complete analytical solution is obtained for two cylinders extending from seabed to free surface, and a long wave approximation is found to provide reliable predictions of the drift force in line with the waves at low frequencies. For moderate separation between the two cylinders, this force is found to tend at low frequencies to a value four times the force on an isolated cylinder.A numerical method is employed to study two surface piercing cylinders truncated below the free surface, and an arrangement of four vertical cylinders characteristic of a floating offshore platform. The mean vertical drift force is found to be reasonably well approximated, over the frequency range of practical interest, by the force on an individual cylinder considered in isolation multiplied by the number of cylinders in the group. Interaction effects, however, have a profound influence on the total horizontal drift force. At low frequencies this force is found to tend to the force on an isolated cylinder multiplied by the squate of the number of cylinders in the group.     

Circulation and Brackish Water Dispersal in a Coastal Lagoon of Southwest Taiwan

Modest observations and numerical experiments were conducted to investigate circulation and brackish water dispersal in a coastal lagoon southwest of Taiwan. The Chi-Ku Lagoon, partially shielded from the sea by a string of sandbar barriers with two entrances among them, receives modest and episodic runoff from Chi-Ku Stream. Flood and ebb tidal streams entering and leaving the two entrances are found to converge and diverge in a flow stagnation area inside the lagoon. Under weak wind conditions, brackish water is preferentially retained in the flow stagnation area. Besides the observations, scenario runs using a three-dimensional numerical model also indicate strong modulation by monsoon winds. Both summer southwest monsoon and winter northeast monsoon reduce brackish water retention; the latter is found to be more effective. This revised version was published online in August 2006 with corrections to the Cover Date.     

Limitations of the Korean conventional fisheries management regime and expanding Korean TAC system toward output control systems

In this paper, we focus on the status and trends of the current Korean fisheries management regime. Specifically, this paper briefly introduces the Korean conventional fisheries management regime (KCFMR) and discusses its problems and limitations. In describing policy evolution, this paper finds reasons why the Korean government has chosen a TAC system, an output control approach, besides input control approaches in force for almost a century. This paper also describes the evolution of the Korean TAC system, which is carrying out a pivotal role in Korean fisheries development, and analyzes problems of the Korean TAC system. Finally, this paper gives a perspective on expanding the Korean TAC system toward Output Control Systems (OCSs) such as Individual Quotas (IQs), Individual Vessel Quotas (IVQs), Individual Transferable Traps (ITTs), Community Quotas (CQs), and Individual Transferable Quotas (ITQs).     

Summer distribution and geochemical composition of suspended-particulate matter in the east china sea

The distribution and geochemical composition of suspended-particulate matter (SPM) in the East China Sea (ECS) were investigated during the summer period of high continental runoff to elucidate SPM sources, distribution and cross-shelf transport. The spatial variability of SPM distribution (0.3–6.5 mg l⁻¹) and geochemical composition (POC, Al, Si, Fe, Mn, Ca, Mg and K) in the ECS was pronounced during summer when the continental fluxes of freshwater and terrestrial materials were highest during the year. Under the influences of Changjiang runoff, Kuroshio intrusion, surface production and bottom resuspension, the distribution generally showed strong gradients decreasing seaward for both biogenic and lithogenic materials. Particulate organic carbon was enriched in surface water (mean ∼18%) due to the influence of biological productivity, and was diluted by resuspended and/or laterally-transported materials in bottom water (mean 9.4%). The abundance of lithogenic elements (Al, Si, Fe, Mn) increased toward the bottom, and the distribution correlations were highly significant. Particulate CaCO₃ distribution provided evidence that the SPM of the bottom water in the northern part of the study area was likely mixed with sediments originally derived from Huanghe. A distinct benthic nepheloid layer (BNL) was present in all seaward transects of the ECS shelf. Sediment resuspension may be caused by tidal fluctuation and other forcing and be regarded as the principal agent in the formation of BNL. This BNL was likely responsible for the transport of biogenic and lithogenic particles across or along the ECS shelf. Total inventories of SPM, POC and PN are 46, 2.8 and 0.4 Tg, respectively, measured over the total area of 0.45 × 10⁶ km² of the ECS shelf. Their mean residence times are about 27, 13 and 11 days, respectively. The inventory of SPM in the water column was higher in the northernmost and southernmost transects and lower in the middle transects, reflecting the influences of terrestrial inputs from Changjiang and/or resuspended materials from Huanghe deposits in the north and perhaps from Minjiang and/or Taiwan’s rivers in the south. The distribution and transport patterns of SPM and geochemical elements strongly indicate that continental sources and cross-shelf transport modulate ECS particulate matter in summer.     

Hydrometallurgical processing and recovery of molybdenum trioxide from spent catalyst

Hydrometallurgical processing of spent hydrodesulphurisation (HDS) catalyst for the recovery of molybdenum using sodium carbonate and hydrogen peroxide mixtures was investigated. The results indicated that the recovery of molybdenum was largely dependent on the concentrations of Na₂CO₃ and H₂O₂ in the reaction medium, which controls the acidity of the leach liquor and carry over of impurities such as Al, Ni, P, Si and V. Leaching process was exothermic and leaching efficiency of molybdenum decreased with increasing solid to liquid ratio. Large scale leaching of spent catalyst, under optimum conditions: 20% pulp density, 85 g/L Na₂CO₃, 10 vol.% H₂O₂ and 1 h reaction, resulted a leaching efficiency of 84% Mo. The obtained leach liquor contained (g/L): Mo — 22.0, Ni — 0.015 and Al — 0.82, P — 1.1, Si — 0.094 and minor quantities of V — 8 mg/L, As and Co — < 1 mg/L. Recovery of Mo from leach solution as MoO₃ of 97.30% purity was achieved by ammonium molybdate precipitation method.     

Results from a Multi-disciplinary Sedimentary Pilot Study of Tectonic Lake Iznik (NW Turkey) – Geochemistry and Paleolimnology of the Recent Past

A limnogeological reconnaissance study was carried out on Lake Iznik, located in the southeast of the Marmara region of Turkey, involving a seismic survey and collection of short sediment cores. This lake is located on the middle branch of the North Anatolian Fault Zone (NAFZ), a transform plate boundary between the Eurasian and Anatolian Plates. It is, therefore, tectonically active and offers an opportunity to investigate the interplay of sedimentary and seismo-tectonic processes, as well as climate change and human impact in the region. Short cores of the three sub-basins, maximum length of 35.5 cm, recovered non-laminated, blackish clays and silts with varying amounts of biogenic and minerogenic (allochthonous, autochthonous) material, which documented almost the last 80 years of deposition and environmental history. High sedimentation rates in the deeper core sections are accompanied by changes in land use (conversion of woodland to farmland) in the northern areas of Lake Iznik, which caused the deposition of more weathered material (high K/Na ratios) and higher contents of Mn in the lake. A tendency towards eutrophic conditions within the last 20 years is indicated by high nutrient content (N, TOC, P), decreasing C/N-ratios, and characteristic diatom and cladoceran associations. Also increased pollution is revealed by higher Pb, Cu, and Zn contents and increased supply of human and animal faeces (high coprostanol content) during the last two decades. But simultaneous lower sedimentation rates towards the core tops complicate the reconstruction of recent and past eutrophication and pollution states of Lake Iznik. This requires an extension of the pilot study and deeper sediment cores, to recover non-anthropogenic influenced sediment levels.     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Wave velocities and attenuation of shaley sandstones as a function of pore pressure and partial saturation

We obtain the wave velocities and quality factors of clay‐bearing sandstones as a function of pore pressure, frequency and partial saturation. The model is based on a Biot‐type three‐phase theory that considers the coexistence of two solids (sand grains and clay particles) and a fluid mixture. Additional attenuation is described with the constant‐Q model and viscodynamic functions to model the high‐frequency behaviour. We apply a uniform gas/fluid mixing law that satisfies the Wood and Voigt averages at low and high frequencies, respectively. Pressure effects are accounted for by using an effective stress law. By fitting a permeability model of the Kozeny– Carman type to core data, the model is able to predict wave velocity and attenuation from seismic to ultrasonic frequencies, including the effects of partial saturation. Testing of the model with laboratory data shows good agreement between predictions and measurements.     

A neural network approach for structural identification and diagnosis of a building from seismic response data

This work presents a novel procedure for identifying the dynamic characteristics of a building and diagnosing whether the building has been damaged by earthquakes, using a back‐propagation neural network approach. The dynamic characteristics are directly evaluated from the weighting matrices of the neural network trained by observed acceleration responses and input base excitations. Whether the building is damaged under a large earthquake is assessed by comparing the modal parameters and responses for this large earthquake with those for a small earthquake that has not caused this building any damage. The feasibility of the approach is demonstrated through processing the dynamic responses of a five‐storey steel frame, subjected to different strengths of the Kobe earthquake, in shaking table tests. Copyright © 2002 John Wiley & Sons, Ltd.