Internal deformation of Sikhote Alin volcanic belt, far eastern Russia: Paleocene paleomagnetic results

We present paleomagnetic results of Paleocene welded tuffs of the 53–50 Ma Bogopol Group from the northern region (46°N, 137°E) of the Sikhote Alin volcanic belt. Characteristic paleomagnetic directions with high unblocking temperature components above 560 °C were isolated from all the sites. A tilt-corrected mean paleomagnetic direction from the northern region is D=345.8°, I=49.9°, α₉₅=14.6° (N=9). The reliability of the magnetization is ascertained through the presence of normal and reversed polarities. The mean paleomagnetic direction from the northern region of the Sikhote Alin volcanic belt reflects a counterclockwise rotation of 29° from the Paleocene mean paleomagnetic direction expected from its southern region. The counterclockwise rotation of 25° is suggested from the paleomagnetic data of the Kisin Group that underlies the Bogopol Group. These results establish that internal tectonic deformation occurred within the Sikhote Alin volcanic belt over the past 50 Ma. The northern region from 44.6° to 46.0°N in the Sikhote Alin volcanic belt was subjected to counterclockwise rotational motion through 29±17° with respect to the southern region. The tectonic rotation of the northern region is ascribable to relative motion between the Zhuravlevka terrane and the Olginsk–Taukhinsk terranes that compose the basements of the Sikhote Alin volcanic belt.     

Paleomagnetic evidence for the clockwise rotation of Southwest Japan

Over 500 oriented samples of felsic rocks of Cretaceous to Middle Miocene age were collected along the Go¯River in the central part of Southwest Japan, in an attempt to detect the process of tectonic rotation of Southwest Japan from the paleomagnetic view point. Thermal demagnetization was successful in isolating characteristic directions from the remanent magnetization of samples. Reliability of the paleomagnetic direction is ascertained through the agreement of directions from different kinds of rocks as well as the presence of both normal and reversed polarities. The paleomagnetic results establish that Southwest Japan began to rotate clockwise through58 ± 14° later than 28 Ma and ceased its motion by about 12 Ma. Southwest Japan has undergone no detectable north-south translation since 28 Ma. These results imply that southwest Japan was rotated about the pivot around 34°N, 129°E between 28 Ma and 12 Ma in association with the opening of the Japan Sea.     

Thermal alteration of hydrated minerals during hypervelocity capture to silica aerogel at the flyby speed of Stardust

Abstract— Outside the Earth's atmosphere, silica aerogel is one of the best materials to capture finegrained extraterrestrial particles in impacts at hypervelocities. Because silica aerogel is a superior insulator, captured grains are inevitably influenced by frictional heat. Therefore, we performed laboratory simulations of hypervelocity capture by using light‐gas guns to impact into aerogels finegrained powders of serpentine, cronstedtite, and Murchison CM2 meteorite. The samples were shot at >6 km s^?1 similar to the flyby speed at comet P/Wild‐2 in the Stardust mission. We investigated mineralogical changes of each captured particle by using synchrotron radiation X‐ray diffraction (SR‐XRD), transmission electron microscope (TEM), and field emission scanning electron microscope (FE‐SEM). SR‐XRD of each grain showed that the majority of the bulk grains keep their original mineralogy. In particular, SR‐XRD and TEM investigations clearly exemplified the presence of tochilinite whose decomposition temperature is about 300 °C in the interior of the captured Murchison powder. However, TEM study of these grains also revealed that all the samples experienced melting and vesiculation on the surface. The cronstedtite and the Murchison meteorite powder show remarkable fracturing, disaggregation, melting, and vesiculation. Steep thermal gradients, about 2500 °C/μm were estimated near the surface of the grains (<2 μm thick) by TEM observation. Our data suggests that the interior of >4 μm across residual grains containing abundant materials that inhibit temperature rise would have not experienced >300 °C at the center.     

Infrared spectroscopic taxonomy for carbonaceous chondrites from speciation of hydrous components

Abstract— Mid‐infrared absorption spectra for all types of carbonaceous chondrites were obtained in this study to establish a versatile method for spectroscopic classification of carbonaceous chondrites. Infrared spectra were measured using a conventional KBr pellet method and diamond press method. Spectra of hydrous carbonaceous chondrites exhibit intense O‐H stretching vibrations. CI chondrites are identifiable by a characteristic sharp absorption band appearing at 3685 cm^?1, which is mainly attributable to serpentine. X‐ray diffraction analysis showed the presence of serpentine. However, Yamato (Y‐) 82162 (C1) does not have the band at 3685 cm^?1 because of its thermal metamorphism. CM and CR chondrites have an intense absorption band at approximately 3600 cm^?1. This absorption tends to appear in CM chondrites more strongly than CR chondrites because the intensity ratios of an OH stretching mode at 3520 cm^?1 compared to 3400 cm^?1 for CM chondrites are in the range of 0.95–1.04, which is systematically higher than those of CR chondrites (0.86–0.88). Therefore, the two types of chondrites are distinguishable by their respective infrared spectra. The spectrum feature of the Tagish Lake meteorite is attributable to neither CI nor CM chondrites. CO chondrites are characterized by weak and broad absorption at 3400 cm^?1. CV chondrites have weak or negligible absorption of water. CK chondrites also have no water‐induced absorption. CH and CB chondrites have a sharp absorption at 3692 cm^?1 indicating the presence of chrysotile, which is also supported by observations of X‐ray diffraction and TEM. The combination of spectroscopic classification and the diamond press method allows classification of carbonaceous chondrites of very valuable samples with small quantities. As one example, carbonaceous chondrite clasts in brecciated meteorites were classified using our technique. Infrared spectra for a fragment of carbonaceous clasts (<1 μg) separated from Willard (b) and Tsukuba were measured. The 3685 cm^?1 band found in CI chondrites was clearly detected in the clasts, indicating that they are CI‐like clasts.     

Mass dispersal and angular momentum transfer during collisions between rubble-pile asteroids. II. Effects of initial rotation and spin-down through disruptive collisions

Expanding on our previous N-body simulation of impacts between initially non-rotating rubble-pile objects [Takeda, T., Ohtsuki, K., 2007. Icarus 189, 256-273], we examine effects of initial rotation of targets on mass dispersal and change of spin rates. Numerical results show that the collisional energy needed to disrupt a rubble-pile object is not sensitive to initial rotation of the target, in most of the parameter range studied in our simulations. We find that initial rotation of targets is slowed down through disruptive impacts for a wide range of parameters. The spin-down is caused by escape of high-velocity ejecta and asymmetric re-accumulation of fragments. When these effects are significant, rotation is slowed down even when the angular momentum added by an impactor is in the same direction as the initial rotation of the target. Spin-down is most efficient when the impact occurs in the equatorial plane of the target, because in this case most of the ejected fragments originate from the equatorial region of the target and a significant amount of angular momentum can be easily removed. In the case of impacts from directions inclined relative to the target's equatorial plane, spin-down still occurs with reduced degree, unless impacts occur onto the pole region from the vertical direction. Our results suggest that such spin-down through disruptive impacts may have played an important role in spin evolution of asteroids through collisions in the gravity-dominated regime.     

Two extraterrestrial dust horizons found in the Dome Fuji ice core,East Antarctica

Two silicate-rich dust layers were found in the Dome Fuji ice core in East Antarctica, at Marine Isotope Stages 12 and 13. Morphologies, textures, and chemical compositions of constituent particles reveal that they are high-temperature melting products and are of extraterrestrial origin. Because similar layers were found ～ 2000 km east of Dome Fuji, at EPICA (European Project for Ice Coring in Antarctica)-Dome C, particles must have rained down over a wide area 434 and 481 ka. The strewn fields occurred over an area of at least 3 × 10⁶ km². Chemical compositions of constituent phases and oxygen isotopic composition of olivines suggest that the upper dust layer was produced by a high-temperature interaction between silicate-rich melt and water vapor due to an impact explosion or an aerial burst of a chondritic meteoroid on the inland East Antarctic ice sheet. An estimated total mass of the impactor, on the basis of particle flux and distribution area, is at least 3 × 10⁹ kg. A possible parent material of the lower dust layer is a fragment of friable primitive asteroid or comet. A hypervelocity impact of asteroidal/cometary material on the upper atmosphere and an explosion might have produced aggregates of sub-μm to μm-sized spherules. Total mass of the parent material of the lower layer must exceed 1 × 10⁹ kg. The two extraterrestrial horizons, each a few millimeters in thickness, represent regional or global meteoritic events not identified previously in the Southern Hemisphere.     

Experimental study on prevention of acid mine drainage by silica coating of pyrite waste rocks with amorphous silica solution

Acid mine drainage (AMD) is a widespread environmental problem associated with working and abandoned mining operations. It results from the microbial oxidation of pyrite in the presence of water and air, affording an acidic solution that contains toxic metal ions. Pyrite microencapsulation, utilizing silica coating, is a novel approach for controlling AMD that has been shown to be very effective in controlling pyrite oxidation. The roles of the solution pH and silica concentration in the formation mechanism for the AMD-preventing coating were investigated. A silica coating can be formed from silica solution at pH 7, at which the amount of Fe eluted from pyrite into the solution is small. No coating was formed at other pH values, and the amounts of eluted Fe were larger than at pH 7, especially at pH 11. The silica coating forms from 2,500 to 5,000 mg/L silica solutions, but not from 0 or 1,000 mg/L silica solutions. The coating formation rate was slower in the 2,500 mg/L silica solution than in the 5,000 mg/L silica solution. The formation of silica coating on pyrite surfaces depends on three main steps: formation of Fe(OH)₃ on the surface of pyrite, reaction between Fe(OH)₃ and silicate in the solution on the pyrite surface, and growth of the silica layer on the first layer of silica. The best pH condition to enable these steps was around 7, and the silica coating formation rate can be controlled by the concentration of silica.     

Observation of Pore Spaces and Microcracks Using a Fluorescent Technique in Some Reservoir Rocks of Oil, Gas and Geothermal Fields in the Green Tuff Region, Japan

Abstract: Pore spaces and microcracks in representative oil, gas and geothermal reservoir rocks from the Green Tuff region, Japan, were examined using a fluorescent technique. This technique was developed to visualize microscopically pore spaces and microcracks filled with synthetic resin mixed with fluorescent paint under ultraviolet light. Various morphology of pore spaces and microcracks was clearly identified. Spaces in studied reservoir rocks are classified into following three types: pore spaces in matrix, pore spaces in particles, and microcracks. It is observed that valuable oil and gas reservoir rocks relatively include many pore spaces, while microcracks are important for geothermal rocks. Correlation between textural characteristics and porosity or permeability was found in the oil reservoir rocks. Effective permeability depends upon pore spaces in matrix more than upon other components such as pore spaces in particles and microcracks. Looseness in matrix caused by larger grain size of particles is strongly correlated with permeability. Pore spaces play an important role as a reservoir in oil and gas fields, but are less important in geothermal field. Instead, microcracks are important for geothermal reservoir system.     

Secondary remanent magnetization carried by magnetite inclusions in silicates: a comparative study of unremagnetized and remagnetized granites

Magnetic carriers in remagnetized Cretaceous granitic rocks of northeast Japan were studied using paleomagnetism, rock magnetism, optical microscopy and scanning electron microscopy (SEM) by comparison with unremagnetized granitic rocks. The natural remanent magnetization (NRM) of the remagnetized rocks is strong (0.3–1.7 A/m) and shows a northwesterly direction with moderate inclination (NW remanence), whereas the unremagnetized rocks preserve weak NRM (<0.5 A/m) with westerly and shallow direction (W remanence). Although thermal demagnetization shows that both NRMs are carried by magnetite, the remagnetized rocks reveal a higher coercivity with respect to alternating field demagnetization (20 mT相似文献