Seismic Ground Motion Expected for the Eastern District of Naples

The seismic ground motion of a test area in the eastern district of Naples is computed with a hybrid technique based on the mode summation and the finite difference methods. This technique allows us the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, we consider the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, which is located about 90 km from the epicenter.The detailed geological setting is reconstructed from a large number of drillings. The sub-soil is mainly formed by alluvial (ash, stratified sand and peat) and pyroclastic materials overlying a pyroclastic rock (yellow neapolitan tuff), representing the neapolitan bedrock. The detailed information available on mechanical properties of the sub-soil and its geometry warrants the application of the sophisticated hybrid technique.As expected, the sedimentary cover causes an increase of the signal's amplitudes and duration. If thin peat layers are present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such layers, that tend to seismically decouple the upper from the lower part of the structure.For SH-waves, the influence of the variations of the S-wave velocities on the spectral amplification is studied, by considering locally measured velocities and values determined from near-by down-hole measurements. The comparison between the computed spectral amplifications confirms the key role of an accurate determination of the seismic velocities of the different layers.The comparison performed between a realistic 2-D seismic response and a standard 1-D response, based on the vertical propagation of waves in a plane layered structure, shows considerable difference, from which it is evident that serious caution must be taken in the modelling of expected ground motion at a specific site.     

Integration of earth observation and census data for mapping a multi-temporal flood vulnerability index: a case study on Northeast Italy

Climate sciences foresee a future where extreme weather events could happen with increased frequency and strength, which would in turn increase risks of floods (i.e. the main source of losses in the world). The Mediterranean basin is considered a hot spot in terms of climate vulnerability and risk. The expected impacts of those events are exacerbated by land-use change and, in particular, by urban growth which increases soil sealing and, hence, water runoff. The ultimate consequence would be an increase of fatalities and injuries, but also of economic losses in urban areas, commercial and productive sites, infrastructures and agriculture. Flood damages have different magnitudes depending on the economic value of the exposed assets and on level of physical contact with the hazard. This work aims at proposing a methodology, easily customizable by experts’ elicitation, able to quantify and map the social component of vulnerability through the integration of earth observation (EO) and census data with the aim of allowing for a multi-temporal spatial assessment. Firstly, data on employment, properties and education are used for assessing the adaptive capacity of the society to increase resilience to adverse events, whereas, secondly, coping capacity, i.e. the capacities to deal with events during their manifestation, is mapped by aggregating demographic and socio-economic data, urban growth analysis and memory on past events. Thirdly, the physical dimension of exposed assets (susceptibility) is assessed by combining building properties acquired by census data and land-surface characteristics derived from EO data. Finally, the three components (i.e. adaptive and coping capacity and susceptibility) are aggregated for calculating the dynamic flood vulnerability index (FVI). The approach has been applied to Northeast Italy, a region frequently hit by floods, which has experienced a significant urban and economic development in the past decades, thus making the dynamic study of FVI particularly relevant. The analysis has been carried out from 1991 to 2016 at a 5-year steps, showing how the integration of different data sources allows to produce a dynamic assessment of vulnerability, which can be very relevant for planning in support of climate change adaptation and disaster risk reduction.

     

An overview of the Gulf of Batabanó (Cuba): Environmental features as revealed by surface sediment characterisation

The main environmental features of the Gulf of Batabanó, Cuba, Caribbean, were investigated through the analyses of surface sediments collected at 23 sites. In order to highlight the potential threats affecting the sedimentary compartment of this area, samples were analysed for: granulometry, mineralogy, heavy metals concentration (As, Cd, Cu, Mn, Ni, Pb, Zn), organic carbon, total nitrogen and radionuclides. Findings were compared with published data and “grey” literature.Results showed: granulometric homogeneity and a widespread carbonatic condition all over the gulf, probably due to stable bathymetry and lack of terrigenous input (except for the La Coloma basin); a rather pristine environment for what concerns heavy metals pollution, except for La Coloma where a large arsenic input was recorded; very low levels of natural and artificial radioactivity; a relevant quantity of sedimentary organic matter, providing biota with useful substrate for feeding and enhancing the food-web development while indirectly supplying lobster fisheries. Combined data highlighted the impact of the Dique Sur in reducing terrigenous input in the coastal area.Future studies should focus on dating of sediment cores for identifying and quantifying the changes acting in the gulf and on investigating the origins of the large arsenic input to La Coloma.     

Seismicity, seismic input and site effects in the Sahel—Algiers region (North Algeria)

Algiers city is located in a seismogenic zone. To reduce the impact of seismic risk in this Capital city, a realistic modelling of the seismic ground motion (SGM) is conducted by using the hybrid method that combines the finite differences method and the modal summation. For this purpose, a complete database of geological, geophysical and earthquake data is constructed. A critical re-appraisal of the seismicity of the zone [2.25°E–3.50°E, 36.50°N–37.00°N] is performed and an earthquake list, for the period 1359–2002, is compiled. The analysis of existing and newly retrieved macroseismic information allowed the definition of earthquake parameters of macroseismic events for which a degree of reliability is assigned. Geological cross sections have been built up to model the SGM in the city, caused by the 1989 Mont-Chenoua and the 1924 Douéra earthquakes. Synthetic seismograms and response spectral ratio is produced for Algiers, and they show that the soft sediments in Algiers centre are responsible of the noticed amplification of the SGM.     

Realistic Modeling of Seismic Input in Urban Areas: A UNESCO-IUGS-IGCP Project

—?The estimation of realistic seismic input can be obtained from the computation of a wide set of time histories and spectral information, corresponding to possible seismotectonic scenarios for different source and structural models. Such a data set can be very constructively used by civil engineers in the design of new seismo-resistant structures and in the reinforcement of the existing built environment, therefore supplying a particularly powerful tool to the prevention efforts of Civil Defense. The availability of realistic numerical simulations enables us to estimate the amplification effects in complex geological structures exploiting the available geotechnical, lithological, geophysical parameters, topography of the medium, tectonic, historical, paleoseismological data, and seismotectonic models. The realistic modeling of the ground motion is a very important source of knowledge for the preparation of groundshaking scenarios which represent a valid and economical tool in seismic microzonation.