Impact of the sampling duration on the uncertainty of averaged velocity measurements with acoustic instruments

Average velocity in streams is a key variable for the analysis and modelling of hydrological and hydraulic processes underpinning water resources science and practice. The present study evaluates the impact of the sampling duration on the quality of average velocity measurements acquired with contemporary instruments such as Acoustic Doppler Velocimeters (ADV) an Acoustic Doppler Current Profilers (ADCP). The evaluation combines considerations on turbulent flows and principles and configurations of acoustic instruments with practical experience in conducting customized analysis for uncertainty analysis purposes. The study sheds new insights on the spatial and temporal variability of the uncertainty in the measurement of average velocities due to variable sampling durations acting in isolation from other sources of uncertainties. Sampling durations of 90 and 150 s are found sufficient for ADV and ADCP, respectively, to obtain reliable average velocities in a flow affected only by natural turbulence and instrument noise. Larger sampling durations are needed for measurements in most of the natural streams exposed to additional sources of data variability.     

TWO COMPONENTS OF COSMIC-RAY MODULATION

The long-term modulation of galactic cosmic rays is investigated from 1957 up to 1992 analysing the dynamic and the quasi-stationary components, separately. It has been found that the dynamic component is characterized by the presence of two peaks at the maximum phase of each solar activity cycle. We infer that the time interval between the two peaks corresponds to a period (well-related to the polar heliomagnetic reversal) in which somewhat decreased activity occurs for intense and long-lasting solar events. In fact, a contemporary dip in the magnetic energy released from the Sun was observed, in agreement with the suggested double maximum displayed by the basic features of the 11-year solar-activity cycle (Gnevyshev, 1977, and references therein). Moreover, the dynamic component of cosmic-ray modulation often shows a multi-structured profile in both peaks of activity, fairly well-connected with the pattern of the green corona brightness. On the other hand, analysing the quasi-stationary long-term trend of cosmic-ray intensity we pick out a good relationship between periods of enhanced cosmic-ray modulation and the area expansion of coronal intensity levels. The relevance of our results for solar-terrestrial forecasting is underlined.     

On a sequence of remarkable fine structures in the type IV burst of 24 April, 1985

During the type IV burst on 24 April, 1985 we observed at 234 MHz an untypical, strong, nearly six hours lasting continuum emission incorporating several groups of broadband pulsations, zebra patterns, fiber bursts, and a new fine structure phenomenon. The power spectra of the groups of broadband pulsations reveal no simple structure. There is only one common periodic component between 0.3 s and 0.4 s. Slowly drifting chains of narrowband fiber bursts are described as a new fine structure by spectrograms and simultaneously recorded single frequency intensity profiles. A qualitative model of this new fine structure is suggested.     

Quantitative textural analysis of packings of elongate crystals

The spatial distribution of grains in a solidifying igneous rock controls the physical properties of the crystal mush, and in turn is controlled by the rate of crystal growth and accumulation. A predominant non-spherical habit for igneous minerals brings into question the use of spherical particles in reference packings used for quantification of spatial distribution. Furthermore, variations of crystal clustering/ordering with length scale require spatial statistics which take into account the distribution of particles beyond nearest neighbours. Using random close packings of spherocylinders, we demonstrate the importance of aspect ratio for the aggregation index (usually known as R) and show that packings of spherical particles have more structure than packings of rods. The spatial distribution functions demonstrate that the plagioclase grains in the colonnade from the Holyoke basalt are clustered on a length scale of 0.5 mm. Understanding the controls on grain spatial distribution in igneous rocks will depend on the application of these techniques to well-understood environments.     

Interpretation of a special fine structure in type-IV solar radio bursts

A special fine structure (slowly drifting chains of narrowband fiber bursts), firstly observed during the solar type-IV radio burst on April 24, 1985, is interpreted as the radio signature of whistler waves periodically excited by a switch-on/switch-off process of a loss-cone instability in a localized wave packet of the fast magnetoacoustic mode.     

Petrologic studies of terrestrial organic matter in Carpathian flysch sediments, southern Poland

In the Carpathian Flysch, coal is present either as exotics of Carboniferous coal deposits or as autochthonous, thin layers of lustrous coal. This paper present the results of the studies of coal-bearing rocks that are coeval with the enclosing flysch sediments. These coals form lenses up to 0.15 m thick. Their morphology precludes an exotic origin. The main petrographic component is collinite with admixtures of poorly fluorescing telinite. Minor components are: exudatinite, sporinite, fusinite, micrinite and sclerotinite. Mineral matter consists of framboidal pyrite clay minerals and quartz.The random reflectance of telocollinite varies from 0.38% to 0.72%, which corresponds to subbituminous and bituminous ranks. Correlation between chemical analysis, coking properties and relfectance measurements, leads to the conclusion that boundary between subbituminous and bituminous coals should be defined by the following values: C=80wt%, VOLATILES=43wt%; calorific VALUE=32.3 MJ/kg; and R^o=0.56–0.57%.Atypical properties, such as: upper C value (75–80wt%); high volatile matter contents (over 43wt%) and low random reflectance (^o about 0.38–0.57%) in subbituminous coals; low C value (about 80–82wt%); low reflectance (0.56–0.72%); and good coking properties, of the bituminous coals are attributed to quick coalification during increasing temperature as a result of tectonic stress.     

Detecting lateral resistivity inhomogeneities with the Schlumberger array

A method of detecting lateral resistivity inhomogeneities with a multi-electrode cable for the Schlumberger array is presented. Using such a cable system, two dipole-dipole soundings are gathered in addition to the Schlumberger sounding at each point. Offset differences calculated from the dipole-dipole data give qualitative information about lateral resistivity inhomogeneities. Results from 1D modelling can give quantitative information about the 2D resistivity distribution since the dipole-dipole soundings are made to either side of the Schlumberger sounding point. Examples from two different locations in Norway are shown. At Reinøya, northern Norway, a dipping layer, confirmed by refraction seismic data, was identified. In a sedimentary basin with a contamination plume at Haslemoen, southern Norway, the method has revealed lateral variations in resistivity. In both cases, the Schlumberger soundings could be fitted with a 1D resistivity model.     

Fourier Power Spectra of Solar Noise Storms

We analyzed three noise storms recorded on 200?–?400 MHz Trieste Callisto radio spectra on 2 July 2012, 8 July 2012, and 16 July 2012 by the Fourier method. We divided intervals of the noise storms into five-minute intervals, and in these intervals we computed the mean Fourier spectra as a function of the wave numbers in the frequency and height-scale spaces. We found that these Fourier spectra, where the spectrum from the quiet-activity interval was subtracted, are power-law spectra. The mean power-law index of these spectra in the range \(\ln(k_{z}) = [1.8, 2.9]\) (where \(k_{z}\) is the wave number in the height-scale space) is \(-1.7\pm0.14\), \(-1.6\pm0.14\), and \(-1.5 \pm0.12\) for the 2 July 2012, the 8 July 2012, and the 16 July 2012 noise storms, respectively. It appears that as the number of Type-I bursts in the studied interval increases, the power-law index becomes closer to \(-5/3\); this is known as the Kolmogorov spectral index. The power-law index of the noise storms is very similar to that of the narrowband dm-spikes found in our previous studies. Furthermore, we found a break in the power spectra at \(\ln(k_{z}) \approx2.9\), and the mean power-law index values above this break are \(-2.9\pm0.46\), \(-3.1\pm0.65\), and \(-3.4\pm0.98\), respectively.     

Surface Geophysical Methods used to Verify the Karst Geological Structure in the Built-up Area: A Case Study of Specific Engineering-Geological Conditions

This article presents a research study of complex limestone karst engineering-geological conditions in the municipality Valaská near Banská Bystrica in Slovakia. The aim of the study is to demonstrate the impossibility of spatial identification of cave spaces using surface geophysical methods due to the specific engineering-geological conditions of a thick surface layer of anthropogenic fill containing highly heterogeneous anthropogenic material. Its maximum thickness is 3 m. Another specificific condition of the study area is its location in the built-up area, due to which the applicability of geophysical methods was limited. The article contains methodological recommendations to be used in analogous geological conditions with karst structures topped with anthropogenic fill, which complicates the identification of cave spaces. The recommended solution herein is the identification of the cave system using underground mapping of the karst and its projection onto the surface for which surface geophysical methods have been combined.     

A conduit-related genesis of the Lengshuiqing intrusive assemblage (Sichuan,SW China)

Lengshuiqing is part of the late Proterozoic igneous province from the western margin of the Yangtze craton. The Lengshuiqing area comprises five ultramafic–mafic intrusions, emplaced in the late Proterozoic Yanbian Group. The intrusions from Lengshuiqing contain cumulate ultramafic zones (peridotite + olivine pyroxenite), with cumulus olivine and Cr-spinel, and intercumulus pyroxenes, hornblende, phlogopite and plagioclase. Ni–Cu ore (pyrrhotite + pentlandite + chalcopyrite) is hosted in the ultramafic zones. Olivine-free diorite–quartz diorite ± gabbro and granite zones commonly occur above the ultramafic rocks. The genesis of the intrusions (conduit-related accumulation or differentiation from stagnant magma) was investigated. The amount of sulphides in the intrusions from Lengshuiqing is one order of magnitude bigger than the sulphides that can be dissolved by a volume of mafic magma similar with the volume of the intrusions. Most intrusions from Lengshuiqing have bulk composition (peridotite ± diorite ± granite) more magnesian (MgO = 21–22%; Mg# > 78) than the deduced composition of their parental magma (MgO = 9–11%; Mg# = 64–67). This indicates the accumulation of sulphide and mafic silicates from a volume of magma much bigger than the volume of the intrusions, which can be explained by the fractionation from magma ascending through the intrusions to shallower depths. A continuous supply and vent of magma is consistent with the lack of chilled margins, the melting of the wall rocks and the generation of high-temperature mineral assemblages (K-feldspar, diopside, and sillimanite) in the Yanbian Group. The intrusions from Lengshuiqing are seen as microchambers on conduits draining olivine-, Cr-spinel-, and sulphide-bearing mafic magma from a larger staging chamber.