Atmospherically-promoted photosynthetic activity in a well-mixed ecosystem: Significance of wet deposition events of nitrogen compounds

Wet atmospheric deposition of dissolved N, P and Si species is studied in well-mixed coastal ecosystem to evaluate its potential to stimulate photosynthetic activities in nutrient-depleted conditions. Our results show that, during spring, seawater is greatly depleted in major nutrients: Dissolved Inorganic Nitrogen (DIN), Dissolved Inorganic Phosphorus (DIP) and Silicic acid (Si), in parallel with an increase of phytoplanktonic biomass. In spring (March–May) and summer (June–September), wet atmospheric deposition is the predominant source (>60%, relative to riverine contribution) for nitrates and ammonium inputs to this N-limited coastal ecosystem. During winter (October–February), riverine inputs of DIN predominate (>80%) and are annually the most important source of DIP (>90%). This situation allows us to calculate the possibility for a significant contribution to primary production in May 2003, from atmospheric deposition (total input for DIN ≈300 kg km⁻² month⁻¹). Based on usual Redfield ratios and assuming that all of the atmospheric-derived N (AD-N) in rainwater is bioavailable for phytoplankton growth, we can estimate new production due to AD-N of 950 mg C m⁻² month⁻¹, during this period of depletion in the water column. During the same episode (May 2003), photosynthetic activity rate, considered as gross primary production, was estimated to approximately 30 300 mg C m⁻² month⁻¹. Calculation indicates that new photosynthetic activity due to wet atmospheric inputs of nitrogen could be up to 3%.     

Lattice defects in three structurally related minerals: Kyanite,yoderite and staurolite

The structures of kyanite, yoderite and staurolite are all built up of alternating layers one of which is the Al₂SiO₅ layer characteristic of the kyanite structure. All the lattice defects found by transmission electron microscopy in these minerals (dislocations, conservative and nonconservative stacking faults, twins) do not affect these layers. In the case of staurolite two types of (010) nonconservative faults are found. Their displacement vectors are [0 1/3 0] and [1/4 1/n 1/4] with n～10 and they respectively cause local regions to transform from the staurolite matrix to kyanite and spinel microdomains. These faults suggest the occurrence of topotactic transformations relating the corresponding phases.     

Characterization of deep saline aquifers in the Bécancour area,St. Lawrence Lowlands,Québec,Canada: implications for CO2 geological storage

The present paper provides a case study of the assessment of the potential for CO₂ storage in the deep saline aquifers of the Bécancour region in southern Québec. This assessment was based on a hydrogeological and petrophysical characterization using existing and newly acquired core and well log data from hydrocarbon exploration wells. Analyses of data obtained from different sources provide a good understanding of the reservoir hydrogeology and petrophysics. Profiles of formation pressure, temperature, density, viscosity, porosity, permeability, and net pay were established for Lower Paleozoic sedimentary aquifers. Lateral hydraulic continuity is dominant at the regional scale, whereas vertical discontinuities are apparent for most physical and chemical properties. The Covey Hill sandstone appears as the most suitable saline aquifer for CO₂ injection/storage. This unit is found at a depth of more than 1 km and has the following properties: fluid pressures exceed 14 MPa, temperature is above 35 °C, salinity is about 108,500 mg/l, matrix permeability is in the order of 3 × 10^?16 m² (0.3 mDarcy) with expected higher values of formation-scale permeability due to the presence of natural fractures, mean porosity is 6 %, net pay reaches 282 m, available pore volume per surface area is 17 m³/m², rock compressibility is 2 × 10^?9 Pa^?1 and capillary displacement pressure of brine by CO₂ is about 0.4 MPa. While the containment for CO₂ storage in the Bécancour saline aquifers can be ensured by appropriate reservoir characteristics, the injectivity of CO₂ and the storage capacity could be limiting factors due to the overall low permeability of aquifers. This characterization offers a solid basis for the subsequent development of a numerical hydrogeological model, which will be used for CO₂ injection capacity estimation, CO₂ injection scenarios and risk assessment.     

Field characterization and data integration to define the hydraulic heterogeneity of a shallow granular aquifer at a sub-watershed scale

Providing a sound basis for aquifer management or remediation requires that hydrogeological investigations carried out to understand groundwater flow and contaminant transport be based on representative data that capture the heterogeneous spatial distribution of aquifer hydraulic properties. This paper describes a general workflow allowing the characterization of the heterogeneity of the hydraulic properties of granular aquifers at an intermediate scale of a few km². The workflow involves characterization and data integration steps that were applied on a 12-km² study area encompassing a decommissioned landfill emitting a leachate plume and its main surface water receptors. The sediments composing the aquifer were deposited in a littoral–sublittoral environment and show evidence of small-scale transitional heterogeneities. Cone penetrometer tests (CPT) combined with soil moisture and electrical resistivity (SMR) measurements were thus used to identify and characterize spatial heterogeneities in hydraulic properties over the study area. Site-specific statistical relationships were needed to infer hydrofacies units and to estimate hydraulic properties from high-resolution CPT/SMR soundings distributed all over the study area. A learning machine approach was used due to the complex statistical relationships between colocated hydraulic and CPT/SMR data covering the full range of aquifer materials. Application of this workflow allowed the identification of hydrofacies units and the estimation of horizontal hydraulic conductivity, vertical hydraulic conductivity and porosity over the study area. The paper describes and discusses data acquisition and integration methodologies that can be adapted to different field situations, while making the aquifer characterization process more time-efficient and less labor-intensive.     

Influence of Zostera marina canopies on unidirectional flow,hydraulic roughness and sediment movement

Seagrasses develop extensive or patchy underwater meadows in coastal areas around the world, forming complex, highly productive ecosystems. Seagrass canopies exert strong effects on water flow inside and around them, thereby affecting flow structure, sediment transport and benthic ecology. The influence of Zostera marina canopies on flow velocity, turbulence, hydraulic roughness and sediment movement was evaluated through laboratory experiments in 2 flumes and using live Z. marina and a mobile sand bed. Profiles of instantaneous velocities were measured and sediment movement was identified upstream, within and downstream of patches of different sizes and shoot density and at different free-stream velocities. Flow structure was characterised by time-averaged velocity, turbulence intensity and Turbulent Kinetic Energy (TKE). When velocity data were available above the canopy, they were fitted to the Law of the Wall and shear velocities and roughness lengths were calculated. When a seagrass canopy was present, three layers were distinguishable in the water column: (1) within canopy represented by low velocities and high turbulence; (2) transition zone around the height of the canopy, where velocities increased, turbulence decreased and TKE was high; and (3) above canopy where velocities were equal or higher than free-stream velocities and turbulence and TKE were lower than below. Shoot density and patch-width influenced this partitioning of the flow when the canopy was long enough (based on flume experiments, at least more than 1 m-long). The enhanced TKE observed at the canopy/water interface suggests that large-scale turbulence is generated at the canopy surface. These oscillations, likely to be related to the canopy undulations, are then broken down within the canopy and high-frequency turbulence takes place near the bed. This turbulence ‘cascade’ through the canopy may have an important impact on biogeochemical processes. The velocity above the canopy generally followed a logarithmic profile. Roughness lengths were higher above the canopy than over bare sand and increased with increasing distance from the leading edge of the canopy; however, they were still small (<1 cm) compared to other studies in the literature. Within and downstream of the canopy, sediment movement was observed at velocities below the threshold of motion. It was likely caused by the increased turbulence at those positions. This has large implications for sediment transport in coastal zones where seagrass beds develop.     

A brief history of the solar oblateness. A review

We hereby present a review on solar oblateness measurements. By emphasizing historical data, we illustrate how the discordance between experimental results can lead to substantial improvements in the building of new technical apparatus as well as to the emergence of new ideas to develop new theories. We stress out the need to get accurate data from space to enhance our knowledge of the solar core in order to develop more precise ephemerids and ultimately build possible new gravitational theories.     

Influence of compound bedforms on hydraulic roughness in a tidal environment

The effect exerted by the seabed morphology on the flow is commonly expressed by the hydraulic roughness, a fundamental parameter in the understanding and simulation of hydro- and sediment dynamics in coastal areas. This study quantifies the hydraulic roughness of large compound bedforms throughout a tidal cycle and investigates its relationship to averaged bedform dimensions. Consecutive measurements with an acoustic Doppler current profiler and a multibeam echosounder were carried out in the Jade tidal channel (North Sea, Germany) along large compound bedforms comprising ebb-oriented primary bedforms with superimposed smaller secondary bedforms. Spatially averaged velocity profiles produced log-linear relationships which were used to calculate roughness lengths. During the flood phase, the velocity profiles were best described by a single log-linear fit related to the roughness created by the secondary bedforms. During the ebb phase, the velocity profiles were segmented, showing the existence of at least two boundary layers: a lower one scaling with the superimposed secondary bedforms and an upper one scaling with the ebb-oriented primary bedforms. The drag induced by the primary bedform during the ebb phase is suggested to be related to flow expansion, separation, and recirculation on the downstream side of the bedform. Three existing formulas were tested to predict roughness lengths from the local bedform dimensions. All three predicted the right order of magnitude for the average roughness length but failed to predict its variation over the tidal cycle.     

Permeability profiles in granular aquifers using flowmeters in direct-push wells

Numerical hydrogeological models should ideally be based on the spatial distribution of hydraulic conductivity (K), a property rarely defined on the basis of sufficient data due to the lack of efficient characterization methods. Electromagnetic borehole flowmeter measurements during pumping in uncased wells can effectively provide a continuous vertical distribution of K in consolidated rocks. However, relatively few studies have used the flowmeter in screened wells penetrating unconsolidated aquifers, and tests conducted in gravel-packed wells have shown that flowmeter data may yield misleading results. This paper describes the practical application of flowmeter profiles in direct-push wells to measure K and delineate hydrofacies in heterogeneous unconsolidated aquifers having low-to-moderate K (10(-6) to 10(-4) m/s). The effect of direct-push well installation on K measurements in unconsolidated deposits is first assessed based on the previous work indicating that such installations minimize disturbance to the aquifer fabric. The installation and development of long-screen wells are then used in a case study validating K profiles from flowmeter tests at high-resolution intervals (15 cm) with K profiles derived from multilevel slug tests between packers at identical intervals. For 119 intervals tested in five different wells, the difference in log K values obtained from the two methods is consistently below 10%. Finally, a graphical approach to the interpretation of flowmeter profiles is proposed to delineate intervals corresponding to distinct hydrofacies, thus providing a method whereby both the scale and magnitude of K contrasts in heterogeneous unconsolidated aquifers may be represented.     

Multivariate statistical analysis of geochemical data as indicative of the hydrogeochemical evolution of groundwater in a sedimentary rock aquifer system

The study of groundwater hydrogeochemistry of the Paleozoic Basses-Laurentides sedimentary rock aquifer system in Québec produced a large geochemical dataset. Groundwater samples were collected at 153 sites over a 1500 km² study area and analyzed for major and minor ions. The large number of data can lead to difficulties in the integration, interpretation and representation of the results. Two multivariate statistical methods, hierarchical cluster analysis (HCA) and principal components analysis (PCA), were applied to a subgroup of the dataset to evaluate their usefulness to classify the groundwater samples, and to identify geochemical processes controlling groundwater geochemistry. This subgroup consisted of 144 samples and 14 parameters (Ca²⁺, Mg²⁺, Na⁺, K⁺, , Cl⁻, , Fe²⁺, Mn²⁺, Br⁻, Sr²⁺, F⁻, Ba²⁺, HS⁻). Seven geochemically distinct clusters, C1–C7, resulted from the HCA. Samples from clusters C3, C4, C6 and C7 are mostly located in preferential recharge areas. The majority of these samples have Ca–Mg–HCO₃ recharge groundwater (C3, C6, C7) and Na–HCO₃ evolved groundwater (C4). Samples from the other three clusters (C1, C2, C5) are characteristic of an aquifer system under confined conditions. The majority of these samples have Na–HCO₃ evolved groundwater (C1, C5) and Na–Cl ancient groundwater that exhibits elevated concentrations in Br⁻ (C2). In addition to recognizing the importance of hydrogeological conditions on groundwater geochemistry, the distribution of clusters also showed the importance of the geological formations on minor and trace elements, such as Fe²⁺, Mn²⁺, Sr²⁺, F⁻ and Ba²⁺. The first five components of the PCA account for 78.3% of the total variance in the dataset. Component 1 is defined by highly positive loadings in Na⁺, Cl⁻ and Br⁻ and is related to groundwater mixing with Champlain Sea water and solute diffusion from the marine clay aquitard. The high positive loadings in Ca²⁺ and Mg²⁺ of component 2 suggest the importance of dissolution of carbonate rocks in this aquifer system. From their characteristic loadings, the first two components are defined as the “salinity” and “hardness” components, respectively. Components 3–5 are related to more local and geological effects. The integration of the HCA and the PCA, with conventional classification of groundwater types, as well as with the hydrogeological and geological contexts, allowed the division of the region into four main geochemical areas, providing an improved regional picture of the aquifer system dynamics and hydrogeochemical evolution of groundwater. The following factors were recognized as influencing the evolution of groundwater identified in every geochemical area: (1) geological characteristics including sedimentary rock type and till mineralogy; (2) hydrogeological characteristics represented by the level of confinement and the hydraulic gradient; and (3) the geological history including the latest glaciation and the Champlain Sea invasion. With its integrated approach, this hydrogeochemical study contributes to the characterization and understanding of complex groundwater flow systems, and provides an example of the long-term geochemical evolution of hydrogeological systems after a major perturbation, in this case seawater invasion.