Thermal evolution and physics of melt extraction on the ureilite parent body

We develop a physical model of the thermal history of the ureilite parent body (UPB) that numerically tracks the history of its heating, hydration, dehydration, partial melting and smelting as a function of its formation time and the initial values of its composition, formation temperature and water ice content. Petrologic and chemical data from the main group (non-polymict) ureilite meteorites, which sample the interior of the UPB between depths corresponding to pressures in the range 3-10 MPa, are used to constrain the model. We find that to achieve the ∼30% melting inferred for ureilites from all sampled depths, the UPB must have had a radius between ∼80 and ∼130 km and must have accreted about 0.55 Ma after CAI formation. Melting began in the body at ∼1 Ma after CAI, and the time at which 30% melting was reached varied with depth in the asteroid but was always between ∼4.5 and ∼5.8 Ma after CAI. The total rate at which melt was produced in the UPB varied from more than 100 m³ s⁻¹ in the very early stages of melting at ∼1 Ma after CAI to ∼5 m³ s⁻¹ between 2 and 3 Ma after CAI, decreasing to extremely small values as the end of melting was approached beyond ∼5 Ma. Although the initial period of high melt production occupied only a short time around 1 Ma after CAI, it corresponded to ∼half (16%) of total silicate melting, and all strictly basaltic (i.e. plagioclase-saturated) melts must have been produced during this period.A very efficient melt transport network, consisting of a hierarchy of veins and larger pathways (dikes), developed quickly at the start of melting, ensuring rapid (timescales of months) transport of any single parcel of melt to shallow levels, thus ensuring that chemical interaction between melts and the rocks through which they subsequently passed was negligible. Volatile (mainly carbon monoxide) production due to smelting began at the start of silicate melting in the shallowest parts of the UPB and at later times at greater depths. Except at the very start and very end of melting, the volatile content of the melts produced was always high - generally between 15 and 35 mass % - and most of the melt produced was erupted at the surface of the UPB with speeds well in excess of the escape velocity and was lost into space. However, we show that 30% melting at the 3 MPa pressure level was only possible if ∼15% of the total melt produced in the asteroid was retained as a small number (∼5) of very extensive, sill-like intrusions centered at a depth of ∼7 km below the surface, near the base of the ∼8 km thick outer crust of the asteroid that was maintained at temperatures below the basalt solidus by conductive heat loss to the surface. The horizontal extents of these sills occupied about 75% of the surface area of the UPB, and the sills acted as buffers between the steady supply of melt from depth and the intermittent explosive eruption of the melt into space. We infer that samples from these intrusions are preserved as the rare feldspathic (loosely basaltic) clasts in polymict ureilites, and show that the cooling histories of the sills are consistent with these clasts reaching isotopic closure at ∼5 Ma after CAI, as given by ²⁶Al-²⁶Mg, ⁵³Mn-⁵³Cr and Pb-Pb age dates.     

Feldspathic clast populations in polymict ureilites: Stalking the missing basalts from the ureilite parent body

Polymict ureilites DaG 164/165, DaG 319, DaG 665, and EET 83309 are regolith breccias composed mainly of monomict ureilite-like material, but containing ∼2 vol% of feldspathic components. We characterized 171 feldspathic clasts in these meteorites in terms of texture, mineralogy, and mineral compositions. Based on this characterization we identified three populations of clasts, each of which appears to represent a common igneous (generally basaltic) lithology and whose mafic minerals show a normal igneous fractionation trend of near-constant Fe/Mn ratio over a range of Fe/Mg ratios that extend to much higher values than those in monomict ureilites. The melts represented by these populations are unlikely to be impact melts, because the ubiquitous presence of carbon in polymict ureilites (the regolith of the ureilite parent body) implies that impact melts would have crystallized under conditions of carbon redox control and therefore have highly magnesian mafic mineral compositions with constant Mn/Mg ratio. Therefore, these melts appear to be indigenous products of igneous differentiation on the ureilite parent body (UPB), complementary to the olivine-pigeonite residues represented by the majority of monomict ureilites.The most abundant population is characterized by albitic plagioclase in association with pyroxenes, phosphates, ilmenite, silica, and incompatible-element enriched glass. Model calculations suggest that it formed by extensive fractional crystallization of the earliest melt(s) of precursor materials from which the most magnesian (shallowest) olivine-pigeonite ureilites formed. A less abundant population, characterized by labradoritic plagioclase, may have formed from melts complementary to more ferroan olivine-pigeonite ureilites, and derived from deeper in the UPB. The third population, characterized by the presence of olivine and augite, could only have formed from melts produced at greater depths in the UPB than the olivine-pigeonite ureilites. Many other feldspathic clasts cannot be positively associated with any of these three populations, because their mafic mineral compositions exhibit carbon redox control. However, they may be products of early crystallization of basaltic melts produced on the UPB, before carbon was exhausted by reduction.Partial melting on the ureilite parent body was a fractional (or incremental) process. Melts were produced early in UPB history, and most likely extracted rapidly, thus preserving primitive chemical and oxygen isotopic signatures in the residues.     

Analysis of drought determinants for the Colorado River Basin

Ongoing drought in the Colorado River Basin, unprecedented urban growth in the watershed, and numerical model simulations showing higher temperatures and lower precipitation totals in the future have all combined to heighten interest in drought in this region. In this investigation, we use principal components analysis (PCA) to independently assess the influence of various teleconnections on Basin-wide and sub-regional winter season Palmer Hydrological Drought Index (PHDI) and precipitation variations in the Basin. We find that the Pacific Decadal Oscillation (PDO) explains more variance in PHDI than El Niño-Southern Oscillation (ENSO), the Atlantic Multidecadal Oscillation (AMO), and the planetary temperature combined for the Basin as a whole. When rotated PCA is used to separate the Basin into two regions, the lower portion of the Basin is similar to the Basin as a whole while the upper portion, which contains the high-elevation locations important to hydrologic yield for the watershed, demonstrates poorly defined relationships with the teleconnections. The PHDI for the two portions of the Basin are shown to have been out of synch for much of the twentieth century. In general, teleconnection indices account for 19% of the variance in PHDI leaving large uncertainties in drought forecasting.     

Uncertainty in modelling of faecal coliform overland transport associated with manure application in Maryland

Concerns for microbial safety of surface water facilitate development of predictive models that estimate concentrations and total numbers of pathogen and indicator organisms leaving manure‐fertilized fields in overland flow during runoff events. Spatial variability of bacterial concentrations in applied manure introduces high uncertainty in the model predictions. The objective of this work was to evaluate the uncertainty in model predictions of the manure‐borne bacteria overland transport caused by limited information on the spatial distribution of bacteria in surface‐applied manure. Experiments were carried out at the ARS Beltsville experimental watershed site (OPE3) in Maryland. Dairy bovine manure was applied at a 59·3 t/ha rate on the 3·55 hectare experimental field. Faecal coliform (FC) concentrations in manure measured in 2004, 2005, 2007, and 2009 varied by 4 orders of magnitude each year. Both runoff volume and FC concentrations in runoff water were monitored using a runoff flume equipped with a refrigerated pump sampler. Two runoff events occurred before the manure was incorporated into the soil. A bacteria transport add‐on module simulator of transport with infiltration and runoff (STWIR) was linked with the event‐based kinematic runoff and erosion model (KINEROS2) to simulate convective‐dispersive overland transport, bacteria release from manure, reversible attachment–detachment to soil, and surface straining of infiltrating bacteria. The model was successfully calibrated with the field experiment data. Monte Carlo simulations were carried out to account for the spatial variation in FC in applied manure and uncertainty in the FC distribution in manure caused by the small number of samples. A tenfold and twofold variation in FC concentrations in the runoff were obtained within the 90% probability interval when initial FC spatial distributions in the manure were represented by 5 and 29 samples, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterization of the lithological contact in the shergottite EETA79001—A record of igneous differentiation processes on Mars

Abstract— Elephant Moraine (EET) A79001 is the only Martian meteorite that consists of both an olivine‐phyric shergottite (lithology A) and a basaltic shergottite (lithology B). The presence of these lithologies in one rock has previously been ascribed to mixing processes (either magmatic or impact‐induced). Here we present data regarding phase changes across the contact between the lithologies. These data show that the contact is gradational and suggest that it is a primary igneous feature consistent with crystallization of a single cooling magma. We present a model to establish a petrogenetic connection between an olivine‐phyric and a basaltic shergottite through differentiation. The model involves the shallow or surface emplacement of a magma that contained pre‐eruptive solids (phenocrysts and minor xenocrysts). Subsequent differentiation via crystal settling and in situ crystallization (Langmuir 1989) resulted in a layered sequence of lithology A overlain by lithology B, with gradations in modal abundance of maskelynite (increasing from A to B) and pigeonite/maskelynite (decreasing from A to B), and a gradational change in pattern of pyroxene zonation (zones of magnesian augite separating magnesian and ferroan pigeonite appear and thicken into B) across the contact. A pigeonite phenocryst‐bearing zone near the contact in lithology B appears to be intermediate between lithology A and the bulk of lithology B (which resembles basaltic shergottite Queen Alexandra Range [QUE] 94201). Re‐examination of Sr isotopic compositions in lithology A and across the contact is required to test and constrain the model.     

The Meteoritical Bulletin,No. 111

Meteoritical Bulletin 111 contains the 3094 meteorites approved by the Nomenclature Committee of the Meteoritical Society in 2022. It includes 11 falls (Antonin, Botohilitano, Cranfield, Golden, Great Salt Lake, Longde, Msied, Ponggo, Qiquanhu, Tiglit, Traspena), with 2533 ordinary chondrites, 165 HED, 123 carbonaceous chondrites (including 4 ungrouped), 82 lunar meteorites, 28 Rumuruti chondrites, 27 iron meteorites, 23 ureilites, 22 mesosiderites, 22 Martian meteorites, 21 primitive achondrites (one ungrouped), 17 ungrouped achondrites, 13 pallasites, 7 enstatite achondrites, 6 enstatite chondrites, and 5 angrites. Of the meteorites classified in 2022, 1787 were from Antarctica, 1078 from Africa, 180 from South America, 34 from Asia, 6 from North America, 4 from Europe, and 1 from Oceania.     

Northwest Africa 1500: Plagioclase‐bearing monomict ureilite or ungrouped achondrite?

Abstract— Northwest Africa (NWA) 1500 is an ultramafic meteorite dominated by coarse (?100–500 μm) olivine (95–96%), augite (2–3%), and chromite (0.6–1.6%) in an equilibrated texture. Plagioclase (0.7–1.8%) occurs as poikilitic grains (up to ?3 mm) in vein‐like areas that have concentrations of augite and minor orthopyroxene. Other phases are Cl‐apatite, metal, sulfide, and graphite. Olivine ranges from Fo 65–73, with a strong peak at Fo 68–69. Most grains are reversezoned, and also have ?10–30 μm reduction rims. In terms of its dominant mineralogy and texture, NWA 1500 resembles the majority of monomict ureilites. However, it is more ferroan than known ureilites (Fo ≥75) and other mineral compositional parameters are out of the ureilite range as well. Furthermore, neither apatite nor plagioclase have ever been observed, and chromite is rare in monomict ureilites. Nevertheless, this meteorite may be petrologically related to the rare augite‐bearing ureilites and represent a previously unsampled part of the ureilite parent body (UPB). The Mn/Mg ratio of its olivine and textural features of its pyroxenes are consistent with this interpretation. However, its petrogenesis differs from that of known augite‐bearing ureilites in that: 1) it formed under more oxidized conditions; 2) plagioclase appeared before orthopyroxene in its crystallization sequence; and 3) it equilibrated to significantly lower temperatures (800–1000 °C, from two‐pyroxene and olivine‐chromite thermometry). Formation under more oxidized conditions and the appearance of plagioclase before orthopyroxene could be explained if it formed at a greater depth on the UPB than previously sampled. However, its significantly different thermal history (compared to ureilites) may more plausibly be explained if it formed on a different parent body. This conclusion is consistent with its oxygen isotopic composition, which suggests that it is an ungrouped achondrite. Nevertheless, the parent body of NWA 1500 may have been compositionally and petrologically similar to the UPB, and may have had a similar differentiation history.     

Trace element partitioning in the Fe-S-C system and its implications for planetary differentiation and the thermal history of ureilites

Element partitioning in metal-light element systems is important to our understanding of planetary differentiation processes. In this study, solid-metal/liquid-sulfide, liquid-metal/liquid-sulfide and solid-metal/troilite partition coefficients (D) were determined for 18 elements (Ag, As, Au, Co, Cr, Cu, Ge, Ir, Ni, Os, Pd, Pt, Mo, Mn, Re, Ru, Se and W) in the graphite-saturated Fe-S-C system at 1 atm. Compared at the same liquid S concentration, the solid/liquid partition coefficients are similar to those in the Fe-S system, but there are systematic differences that appear to be related to interactions with carbon dissolved in the solid metal. Elements previously shown to be “anthracophile” generally have larger solid/liquid partition coefficients in the Fe-S-C system, whereas those that are not have similar or smaller partition coefficients in the Fe-S-C system. The partitioning of trace elements between C-rich and S-rich liquids is, in most cases, broadly similar to the partitioning between solid metal and S-rich liquid. The highly siderophile elements Os, Re, Ir and W are partitioned strongly into the C-rich liquid, with D ? 100. The partition coefficients for Pt, Ge and W decrease significantly at the transition to liquid immiscibility, while the partition coefficient for Mo increases sharply. The bulk siderophile element patterns of ureilite meteorities appear to be better explained by separation of S-rich liquid from residual C-rich metallic liquid at temperatures above the silicate solidus, rather than by separation of S-rich liquid from residual solid metal at lower temperatures.