Real-time difference imaging analysis of MOA Galactic bulge observations during 2000

We describe observations carried out by the MOA group of the Galactic bulge during 2000 that were designed to detect efficiently gravitational microlensing of faint stars in which the magnification is high and/or of short duration. These events are particularly useful for studies of extrasolar planets and faint stars. Approximately 17 deg² were monitored at a sampling rate of up to six times per night. The images were analysed in real time using a difference imaging technique. 20 microlensing candidates were detected, of which eight were alerted to the microlensing community whilst in progress. Approximately half of the candidates had high magnifications (≳10), at least one had very high magnification (≳50), and one exhibited a clear parallax effect. The details of these events are reported here, together with details of the on-line difference imaging technique. Some nova-like events were also observed and these are described, together with one asteroid.     

Molecular Identification and Expression Analysis of Carbonic Anhydrase VII in Pufferfish (Takifugu rubripes)

Ocean Science Journal - A carbonic anhydrase VII gene, encoding 277 amino acids, was identified in the intestinal tissue of pufferfish (Takifugu rubripes). The translated protein with an 833-bp...     

Wide-Field Camera for Gravitational Microlensing Survey: MOA-cam2

We have constructed a large, mosaic CCD camera called MOA-cam2 which has 4096 × 6144-pixelsto search for gravitational microlensing events. MOA-cam2 has three4096 × 2048-pixel SITe CCD chips, which have a very high quantum efficiency (nearly 80% in the wave region 500 to 800 nm),and three buttable sides. We have placed the threechips side by side with 100 m dead space. MOA-cam2 has been installed on the 61 cm Boller and Chivens telescope of the MOA collaboration at the Mt. John University Observatory (MJUO) in NewZealand since July 1998. The field coverage is 0.92° × 1.38° per exposure. The technical details of MOA-cam2 and the first images obtained with the Boller and Chivens telescope are presented. MOA-cam2 introduces a second phase of research on gravitational microlensing by the MOA collaboration.     

中国内陆高原正极性雷电的观测实验研究

叙述了１９９７年夏季中日两国科学家在甘肃平凉地区合作进行的有关正极性雷电的综合观测实验情况,包括地布局,所采用的技术手 取得的主要结果。实验中采用人工引发雷电技术并取得了两次成功,其中一次是利用“空中解发”方式,即火箭拖带的细钢丝下端不直接接地,而是通过一段绝缘尼龙线与接地的另一段细钢丝相连。用这种方式可以更真实地再现自然雷电的初始过程。实验中观测到了空中导线两端先导的双向传输现象;电流、电场变化     

Effects of riverbed incision on the hydrology of the Vietnamese Mekong Delta

The hydrogeomorphology of the Vietnamese Mekong Delta (VMD) has been significantly altered by natural and anthropogenic drivers. In this study, the spatiotemporal changes of the flow regime were examined by analysing the long-term daily, monthly, annual and extreme discharges and water levels from 1980 to 2018, supported by further investigation of the long-term annual sediment load (from the 1960s to 2015), river bathymetric data (in 1998, 2014 and 2017) and daily salinity concentration (from the 1990s to 2015) using various statistical methods and a coupled numerical model. Then, the effects of riverbed incision on the hydrology were investigated. The results show that the dry season discharge (i.e., in March–June) of the Tien River increased by up to 23% from the predam period (1980–1992) to the postdam period (1993–2018) but that the dry season water level at My Thuan decreased by up to −46%. The annual mean and monthly water levels in June at Tan Chau and in January and June–October at My Thuan in the Tien River decreased statistically, even though the respective discharges increased significantly. These decreased water levels instead of the increased discharges were attributed to the accelerated riverbed incision upstream from My Thuan, which increased by more than three times, from a mean rate of −0.16 m/year (−16.7 Mm³/year) in 1998–2014 to −0.5 m/year (−52.5 Mm³/year) in 2014–2017. This accelerated riverbed incision was likely caused by the reduction in the sediment load of the VMD (from 166.7 Mt/year in the predam period to 57.6 Mt/year in the postdam period) and increase in sand mining (from 3.9 Mm³ in 2012 to 13.43 Mm³ in 2018). Collectively, the decreased dry season water level in the Tien River is likely one of the main causes of the enhanced salinity intrusion.     

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.     

Control of Phosphate Concentration through Adsorption and Desorption Processes in Groundwater and Seawater Mixing at Sandy Beaches in Tokyo Bay, Japan

Field observation was conducted to monitor phosphate concentrations in groundwater and seawater mixing at two sandy beaches in Futtsu and Miura in Tokyo Bay, Japan. Dissolved phosphate concentrations were measured along transects from fresh groundwater aquifer to seawater adjacent the beaches. The concentrations were often high (up to 46 µM) in fresh groundwater samples (Cl^– < 0.2). Coastal seawater, on the other hand, exhibited low phosphate concentrations (1.5 µM or less). Along the transects, phosphate generally displayed non-conservative behavior during mixing of fresh and saline waters in the aquifer; concentrations as high as 100 µM were found around the upper limit of seawater intrusion (Cl^– = 2). Laboratory experiments were executed to identify the processes that control the phosphate behavior in the mixing processes. The results revealed that adsorption-desorption processes by the aquifer sand particles could significantly control the phosphate concentrations in the groundwater. Furthermore, the adsorption and/or desorption was found to be a function of salinity; the equilibrium concentration of dissolved phosphate in slurry of sand and water was the highest in freshwater and decreased considerably in saline water. The extreme concentration of phosphate may be caused by release from sand particles coinciding with the rapid change in salinity with tide.