Mechanism for the rapid motion of the Qianjiangping landslide during reactivation by the first impoundment of the Three Gorges Dam reservoir, China

The first impoundment of the Three Gorges Dam reservoir in China started from a water surface elevation of 95 m on June 1, 2003 and reached 135 m on June 15, 2003. Shortly after the water level reached 135 m, many slopes began to deform and some landslides occurred. The Qianjiangping landslide is the largest one; it occurred on the early morning of July 14, 2003 and caused great loss of lives and property. Field investigation revealed that, although failure occurred after the reservoir reached 135 m, the stability of the slope was already reduced by preexisting sheared bedding planes. To study the mechanism of the rapid motion of this reactivated landslide, two soil samples were taken from a yellow clay layer and a black silt layer in the sliding zone, respectively, and a series of ring shear tests were conducted on the samples. One series of ring shear tests simulates the creep deformation behavior, while the other series simulates different shear rates. Conclusions drawn from analysis of the ring shear tests indicate that the mechanism of the rapid motion of the reactivated landslide was caused by the rate effect of the black silt layer during the motion phase after the creep failure. The yellow clay layer did not play any important role in the rapid motion in the 2003 event.     

Interactive behavior of soil–pile-superstructure system in transient state to liquefaction by means of large shake table tests

Shaking table tests were conducted by means of a large-scale laminar box with 4 m in length, 2 m in width and 2 m in height in order to investigate behavior of a soil-pile-superstructure system in liquefiable ground. A model two-storey structure, supported by a pile group, was set in a saturated sand deposit, and subjected to a sinusoidal base motion with increasing amplitude. Discussions are focused on the transient behavior until soil liquefaction occurs. Main interests are characteristics of springs used in a sway-rocking model and a multi-freedom lumped mass (MFLM) model that are frequently used in soil–pile interaction analysis. The spring constant in the sway-rocking model is represented by restoring force characteristics at the pile head, and that in the MFLM system is represented by an interaction spring connecting the pile to the free field. The transient state prior to soil liquefaction is shown to be important in the design of a pile because dynamic earth pressure shows peak response in this state. The reduction of the stiffness due to excess porewater generation and strain dependent nonlinear behavior is evaluated.     

Lagrangian meshfree particles method (SPH) for large deformation and failure flows of geomaterial using elastic–plastic soil constitutive model

Simulation of large deformation and post‐failure of geomaterial in the framework of smoothed particle hydrodynamics (SPH) are presented in this study. The Drucker–Prager model with associated and non‐associated plastic flow rules is implemented into the SPH code to describe elastic–plastic soil behavior. In contrast to previous work on SPH for solids, where the hydrostatic pressure is often estimated from density by an equation of state, this study proposes to calculate the hydrostatic pressure of soil directly from constitutive models. Results obtained in this paper show that the original SPH method, which has been successfully applied to a vast range of problems, is unable to directly solve elastic–plastic flows of soil because of the so‐called SPH tensile instability. This numerical instability may result in unrealistic fracture and particles clustering in SPH simulation. For non‐cohesive soil, the instability is not serious and can be completely removed by using a tension cracking treatment from soil constitutive model and thereby give realistic soil behavior. However, the serious tensile instability that is found in SPH application for cohesive soil requires a special treatment to overcome this problem. In this paper, an artificial stress method is applied to remove the SPH numerical instability in cohesive soil. A number of numerical tests are carried out to check the capability of SPH in the current application. Numerical results are then compared with experimental and finite element method solutions. The good agreement obtained from these comparisons suggests that SPH can be extended to general geotechnical problems. Copyright © 2008 John Wiley & Sons, Ltd.     

Weathering mechanisms and their effects on landsliding in pelitic schist

Physical, chemical, and mineralogical analyses of undisturbed drill cores of pelitic schist from a landslide area in Japan clarified the mechanisms of chemical weathering of pelitic schist. Oxidizing surface water percolates downward and reaches an oxidation front, where chlorite is altered to Al‐vermiculite, graphite and pyrite are oxidized and depleted, and goethite precipitates. Oxidation of pyrite also occurs just below the oxidation front, probably by ferric iron. Pyrite oxidation yields sulphuric acid, which penetrates further downward, interacting with and weakening the rocks. In addition to this chemical weakening, stress release and shearing along schistosities form an incipient shear zone, which propagates to a sliding zone that forms the rupture surface of a landslide. Once a sliding zone has developed, it inhibits downward groundwater flow across it because of its low permeability, slowing the downward propagation of the weathering zone until this filtration barrier is broken by landslide movement. Copyright © 2010 John Wiley & Sons, Ltd.     

Can the visualization of rip currents prevent drowning accidents? Consideration of the effect of optimism bias

Drowning accidents at beach in Japan are caused by rip currents. To reduce these accidents, a new technology that can detect rip currents and notify beachgoers by using the Internet of Things (IoT) and Artificial Intelligence (AI) was proposed. However, studies on the effect of visualizing rip currents or considering the effect of optimism bias have not been conducted. This study investigates if visualization of rip currents might help in preventing drowning accidents, while considering the effect of optimism bias. The participants were 90 Japanese beachgoers. They were asked to answer questions based on their knowledge of the beach and rip currents, their optimism bias regarding rip currents, and awareness with or without visualization. The results of the analyses suggest that despite optimism bias, the visualization of rip currents increases the tendency of beachgoers to perceive and avoid rip currents. As described above, it was found that by visualizing the rip current, beachgoers were able to perceive and avoid rip currents. In addition, an understanding of rip currents is positively related to the intent to avoid rip currents even when rip currents are visualized. Therefore, it is necessary not only to enhance the avoidance tendency by visualizing rip currents, but also to further enhance knowledge of beachgoers to deepen the understanding of rip currents including the danger associated and methods to avoid them.

     

Farm income,inequality, and poverty among farm families of a flood-prone area in Bangladesh: climate change vulnerability assessment

GeoJournal - This paper examines the farm income differences, income inequality of farm households, parameters of income variability that ascertain vulnerability levels, and cost-income variability...     

Phytoplankton and ice-algal communities in the seasonal ice zone during January (Southern Ocean,Indian sector)

Journal of Oceanography - In the seasonal ice zone (SIZ), sea-ice algae have been hypothesized to influence phytoplankton species composition in seawater after melting from sea ice. However,...     

Structural controls on the 1998 volcanic unrest at Iwate volcano: Relationship between a shallow, electrically resistive body and the possible ascent route of magmatic fluid

Magnetotelluric (MT) measurements were conducted at Iwate volcano, across the entirety of the mountain, in 1997, 1999, 2003, 2006, and 2007. The survey line was 18 km in length and oriented E–W, comprising 38 measurements sites. Following 2D inversion, we obtained the resistivity structure to a depth of 4 km. The surface resistive layer (~ several hundreds of meters thick) is underlain by extensive highly conductive zones. Based on drilling data, the bottom of the highly conductive zone is interpreted to represent the 200 °C isotherm, below which (i.e., at higher temperatures) conductive clay minerals (smectite) are rare. The high conductivity is therefore mainly attributed to the presence of hydrothermally altered clay. The focus of this study is a resistive body beneath the Onigajo (West-Iwate) caldera at depths of 0.5–3 km. This body appears to have impeded magmatic fluid ascent during the 1998 volcanic unrest, as inferred from geodetic data. Both tectonic and low-frequency earthquakes are sparsely distributed throughout this resistive body. We interpret this resistive body as a zone of old, solidified intrusive magma with temperatures in excess of 200 °C. Given that a similar relationship between a resistive body and subsurface volcanic activity has been suggested for Asama volcano, structural controls on subsurface magmatic fluid movement may be a common phenomenon at shallow levels beneath volcanoes.     

Model identification and parameter estimation of elastoplastic constitutive model by data assimilation using the particle filter

Data assimilation, using the particle filter and incorporating the soil‐water coupled finite element method, is applied to identify the yield function of the elastoplastic constitutive model and corresponding parameters based on the sequential measurements of hypothetical soil tests and an actual construction sequence. In the proposed framework of the inverse analysis, the unknowns are both the particular parameter within the exponential contractancy model, n_E, which parameterizes various shapes for the yield function of the competing constitutive models, including the original/the modified Cam‐Clay models and in‐between models and the parameters of the corresponding constitutive model. An appropriate set, consisting of the yield function of the constitutive model and the parameters of the constitutive model, can be simultaneously identified by the particle filter to describe the most suitable soil behavior. To examine the validity of the proposed procedure, hypothetical and actual measurements for the displacements of a soil specimen were obtained for consolidated and undrained tests through a synthetic FEM computation and for consolidated and drained tests, respectively. After examining the applicability of the proposed procedure to these test results, the present paper then focuses on the actual measured data, ie, the settlement behavior including the lateral deformation of the Kobe Airport Island constructed on reclaimed land.