Reconstruction of the diagenesis of the fluvial-lacustrine- deltaic sandstones and its influence on the reservoir quality evolution-- Evidence from Jurassic and Triassic sandstones, Yanchang Oil Field, Ordos Basin

The reservoir quality of Jurassic and Triassic fluvial and lacustrine-deltaic sandstones of the Yanchang Oil Field in the Ordos Basin is strongly influenced by the burial history and facies-related diagenetic events. The fluvial sandstones have a higher average porosity (14.8%) and a higher permeability (12.7×10?3 ?m2) than those of the deltaic sandstones (9.8% and 5.8 ×10?3 ?m2, respectively). The burial compaction, which resulted in 15% and 20% porosity loss for Jurassic and Triassic sandstones, respectively, is the main factor causing the loss of porosity both for the Jurassic and Triassic sandstones. Among the cements, carbonate is the main one that reduced the reservoir quality of the sandstones. The organic acidic fluid derived from organic matter in the source rocks, the inorganic fluid from rock-water reaction during the late diagenesis, and meteoric waters during the epidiagenesis resulted in the formation of dissolution porosity, which is the main reason for the enhancement of reservoir-quality.     

Temporal relief deformation of the western inner continental shelf off the Nile delta,Egypt

Twenty three bathymetric profiles up to a depth of 28 m were surveyed along and across the western inner shelf off the Nile delta. These surveys were conducted during 1919/22, 1976/77 and 1986. Comparison of these profiles establish that there are significant delta-wide changes in the patterns of erosion and accretion that correspond to sediment movement resulting from the prevailing dynamic factors affecting this area. Maximum bottom erosion (negative relief deformation) was detected along Abu Quir bay, on the tip of the Rosetta promontory, along both sides of the Rosetta mouth, and along the Burullus-Baltim coast. In contrast, there has been maximum bottom accretion (positive relief deformation) at Abu Quir cape and at Abu Khashaba. The sources of the accreted sediment probably come from areas of beach erosion as well as from offshore due to the combined effect of the offshore-onshore exchange.     

Distribution of diagenetic alterations within depositional facies and sequence stratigraphic framework of fluvial sandstones: Evidence from the Petrohan Terrigenous Group,Lower Triassic,NW Bulgaria

Sequence stratigraphy of fluvial deposits is a controversial topic because changes in relative sea level will eventually have indirect impact on the spatial and temporal distribution of depositional facies. Changes in the relative sea level may influence the accommodation space in fluvial plains, and hence have impact on types of fluvial system, frequency of avulsion, and style of vertical and lateral accretion. This study aims to investigate whether depositional facies and changes in the fluvial system of the Lower Triassic Petrohan Terrigenous Group sandstones (NW Bulgaria) in response to changes in the relative sea level have an impact on the spatial and temporal distribution of diagenetic alterations.     

Hydrologic factors controlling groundwater salinity in northwestern coastal zone,Egypt

The aim of this article is to assess the main factors influencing salinity of groundwater in the coastal area between El Dabaa and Sidi Barani, Egypt. The types and ages of the main aquifers in this area are the fractured limestone of Middle Miocene, the calcareous sandstone of Pliocene and the Oolitic Limestone of Pleistocene age. The aquifers in the area are recharged by seasonal rainfall of the order of 150 mm/year. The relationship of groundwater salinity against the absolute water level, the well drilling depth, and the ability of aquifer to recharge has been discussed in the present work. The ability of aquifer to locally recharge by direct rainfall is a measure of the vertical permeability due to lithological and structural factors that control groundwater salinity in the investigated aquifers. On the other hand, the fracturing system as well as the attitude of the surface water divide has a prime role in changing both the mode of occurrence and the salinity of groundwater in the area. Directly to the west of Matrouh, where the coastal plain is the narrowest, and east of Barrani, where the coastal plain is the widest, are good examples of this concept, where the water salinity attains its maximum and minimum limits respectively. Accordingly, well drilling in the Miocene aquifer, in the area between El Negila and Barrani to get groundwater of salinities less than 5000 mg/l is recommended in this area, at flow rate less than 10 m³/hr/well. In other words, one can expect that the brackish water is probably found where the surface water divide is far from the shore line, where the Wadi fill deposits dominate (Quaternary aquifer), acting as a possible water salinity by direct rainfall and runoff.     

Diagenesis of the Khuff Formation (Permian–Triassic), northern United Arab Emirates

This diagenetic study (including fieldwork, petrographic, fluid inclusion, and stable isotope investigations) deals with the outcrop of Upper Permian–Lower Triassic carbonate rocks, which are equivalent to the Khuff Formation. The studied succession, which outcrops in the Ras Al Khaimah region, northern United Arab Emirates, comprises three formations, including the Bih, the Hagil, and the Ghail formations. The study focuses on unraveling the conditions and fluid compositions encountered during diagenesis of the succession. Emphasize is also made on linking diagenesis to major stratigraphic surfaces and to highlight reservoir property evolution and heterogeneity of the studied rocks. The evolution of fluids and related diagenetic products can be summarized as follows: (1) formation of near-surface to shallow burial, fine-crystalline dolomite (dolomite matrix) through pervasive dolomitization of carbonate sediments by modified marine pore waters; (2) formation of coarse-crystalline dolomite cement by highly evolved marine pore waters (13–23 wt.% NaCl eq.) at elevated temperatures (120–208°C), and (3) calcite cementation by highly saline fluid (20–23 wt.% NaCl eq.) at high temperature (170–212°C). A final calcite cement generation has been formed by the percolation of meteoric fluids during uplift. Fracture- and vug-filling diagenetic minerals are mainly restricted to the mid-Bih breccia marker level, suggesting preferential focused fluid flow through specific stratigraphic surfaces as well as along tectonic-related structures. Reservoir properties have been evolved as result of the interplay of the original sedimentary texture and the diagenetic evolution. Porosity is higher in the Bih Formation, which is dominated by dolomitized packstones and grainstones, than in the Hagil and Ghail formations, consisting mainly of dolomitized mudstones and wackestones. Image analyses were used to quantify the visual porosity in thin sections. The highest porosity values were measured in the Bih Formation, which is characterized by significant amounts of vug- and fracture-filling cements. This feature is attributed to the increase of porosity owing to substantial dissolution of abundant intergranular and vug-filling cements. In contrast, the Hagil and Ghail formations, which consist of finer-grained rock than the Bih Formation, were less cemented, and thus, the porosity enhancement by cement dissolution was insignificant.     

Diagenetic alterations related to marine transgression and regression in fluvial and shallow marine sandstones of the Triassic Buntsandstein and Keuper sequence,the Paris Basin,France

The distribution of diagenetic alterations in Triassic fluvio-deltaic, quartzarenitic to sublitharenitic, lowstand systems tract (LST) sandstones of the Grès á Voltzia Formation, anastomosing fluvial, quartzarenitic transgressive systems tract (TST) sandstones of the Grès á Roseaux Formation, and shallow marine, quartzarenitic to sublitharenitic, TST sandstones of the Grès Coquiller Formation, the Paris Basin (France), can be linked to transgression and regression events, and thus to the sequence stratigraphic context. Near-surface eogenetic alterations, which display a fairly systematic link to the depositional facies and sequence stratigraphic framework, include: (i) cementation by meteoric water calcite (δ¹⁸O=−8.9‰ and δ¹³C=−9.1‰) in the fluvio-deltaic, LST sandstones, (ii) cementation by mixed marine–meteoric calcite (δ¹⁸O=−5.3‰ to −2.6‰ and δ¹³C=−3.9‰ to −1.3‰) and dolomite (δ¹⁸O=−4.6‰ to −2.6‰ and δ¹³C=−2.9‰ to −2.3‰) in the foreshore, TST sandstones and below parasequence boundaries (PB), and transgressive surface (TS), and in the shoreface, TST sandstones below maximum flooding surfaces (MFS), being facilitated by the presence of carbonate bioclasts, (iii) dissolution of detrital silicates and precipitation of K-feldspar overgrowths and kaolinite, particularly in the fluvio-deltaic, LST sandstones owing to effective meteoric water circulation, and (vi) formation of autochthonous glauconite, which is increases in abundance towards the top of the fluvio-deltaic, LST sandstones, and along TS, and in the shoreface, TST sandstones, by alteration of micas owing to the flux of seawaters into the sandstones during transgression, whereas parautochthonous glauconite is restricted to the TS sandstones owing to marine reworking. Mesogenetic alterations, which include cementation by quartz overgrowths and illite, display fairly systematic link to fluvio-deltaic, LST sandstones. This study has revealed that linking of diagenesis to transgression and regression events enables a better understanding of the parameters that control the spatial and temporal distribution of diagenetic alterations in sandstones and of their impact on reservoir quality evolution.     

The chemical durability of tektites—A laboratory study and correlation with long-term corrosion behavior

Leach tests carried out on tektite specimens (indochinites and australites) under high-dilution conditions show a common behavior characterized by low leach rates (1.8 × 10^?5g · m^?2 · d^?1or 7.2 × 10^?12m · d^?1 at 23°C) and an activation energy of (79.6 ± 0.7) × 10³J · mol^?1. The extent of selective leaching is very small, of the order of 10^?8 m. Extrapolation of test results over the lifetime of the tektites gives an excellent agreement with field observations on the extent of corrosion, and this is an important step in establishing the validity of laboratory tests as a basis for the development of models and predictions concerning long-term durabilities at least in the limiting case of high dilution or rapid flow. The results are also shown to be in agreement with various previous observations on the corrosion resistance of tektites. The chemical durability of tektites is observed to be consistent with their composition, highlighting requirements for high corrosion resistance in glasses; these requirements include a silica content in excess of 67 mol%, an extremely low water content and an alkali content which is low both absolutely and relative to the di- and poly-valent metal oxide levels. It is shown that artificial glasses which fulfil these criteria are no less corrosion-resistant than the corresponding natural glasses. These conclusions have bearing on the development as well as on the evaluation of glasses intended for very long service, such as radioactive waste vitrification media.     

Sequence stratigraphic distribution of diagenetic alterations in coal-bearing, paralic sandstones: evidence from the Rio Bonito Formation (early Permian), southern Brazil

Abstract Linking siliciclastic diagenesis to sequence stratigraphy allows a better understanding of the parameters controlling the spatial and temporal distribution of diagenetic alterations, and hence of reservoir quality. A study of the coal-bearing, alluvial, deltaic, estuarine and shallow-marine sandstones of the Rio Bonito Formation, early Permian, Paraná Basin (southern Brazil), reveals that the distribution of diagenetic alterations and of related reservoir quality evolution can be constrained within a sequence stratigraphic framework. Calcite, dolomite, siderite, kaolinite and pyrite cementation is consistently linked to sequence and parasequence boundaries, transgressive and maximum flooding surfaces and is systematically distributed within lowstand, transgressive and highstand systems tracts. Diagenesis of coal layers at parasequence boundaries has promoted the formation of stratabound calcite (detectable in resistivity wire line logs), concretionary pyrite and kaolinite and of silicate grain dissolution in sandstones located above and below these boundaries, particularly in the transgressive systems tract. Meteoric water diagenesis caused grain dissolution and the formation of kaolinite in sandstones below sequence boundaries and in lowstand systems tract sandstones. Carbonate bioclasts and low sedimentation rates in lag deposits at parasequence boundaries, transgressive and maximum flooding surfaces favoured the formation of grain-rimming siderite. The results of this study are relevant to the exploration of coal-bed methane and other coal-bearing reservoirs, where it is crucial to unravel and predict the distribution and quality of reservoirs and compartments.     

An integrated data-mining and multi-criteria decision-making approach for hazard-based object ranking with a focus on landslides and floods

This study is aimed at conducting a hazard-based sustainability gap analysis considering spatial threats driven by floods and landslides, that is, a multi-hazard-based prioritization of the most important cities in Gorganrood Basin, Iran. Two data-mining models were used to assess the spatial probability of flood inundation and landslide occurrence, namely, support vector machine with the radial basis function kernel (SVM-RBF) and maximum entropy (ME). As inputs, a total of 124 flooded locations and 346 landslides with ten flood/landslide predisposing factors were mapped using geoinformatics and organizational data. The random selection method was used to split the flood and landslide inventories into two sets of train and test data. Tolerance index was used to test the multicollinearity among predictors. Validation of the models was carried out using the area under the receiver operating characteristic (ROC) curve (AUC). Finally, TOPSIS was used, as a multi-criteria decision-making model, to make an internal sustainability gap analysis to prioritize the threatened and safe cities. For flood inundation, the AUC values obtained from the test set revealed that the SVM-RBF outperformed ME in terms of predictive power and generalization capacity with the respective areas of 0.831 and 0.796 under the curve. For landslide susceptibility assessment, SVM-RBF again excelled ME in predictive power with the respective values of 0.887 and 0.84. Therefore, the susceptibility maps derived from SVM-RBF, as the premier model, were used for the next stage. Extracting the flood and landslide spatial probability values to 14 city points, the TOPSIS-Solver software made a prioritization using the similarity function to the ideal solution. Accordingly, Aliabad, Minoodasht, and Azadshahr cities, with having the smallest similarity coefficients, were found to be the top three spatially threatened cities in Gorganrood Basin, while Aq Qala, Gomishan, and Gonbad-e Kavus cities were placed at the bottom as the safest cities. This study can be a pivotal point in regional risk-based planning, implementation of further pragmatic measures, and allocation of resources for improving sustainable development most wisely.     

Fluid–rock interactions associated with regional tectonics and basin evolution

An integrated approach consisting of fracture analysis, petrography, carbon, oxygen and strontium‐isotope analyses, as well as fluid‐inclusion micro‐thermometry, led to a better understanding of the evolution of fluid–rock interactions and diagenesis of the Upper Permian to Upper Triassic carbonates of the United Arab Emirates. The deposited carbonates were first marked by extensive early dolomitization. During progressive burial, the carbonates were affected by dolomite recrystallization as well as precipitation of vug and fracture‐filling dolomite, quartz and calcite cements. After considerable burial during the Middle Cretaceous, sub‐vertical north–south oriented fractures (F1) were cemented by dolomite derived from mesosaline to hypersaline fluids. Upon the Late Cretaceous maximum burial and ophiolite obduction, sub‐vertical east–west fractures (F2) were cemented by dolomite (Dc2) and saddle dolomite (Ds) derived from hot, highly saline fluids. Then, minor quartz cement has precipitated in fractures from hydrothermal brines. Fluid‐inclusion analyses of the various diagenetic phases imply the involvement of increasingly hot (200°C) saline brines (20 to 23% NaCl eq.). Through one‐dimensional burial history numerical modelling, the maximum temperatures reached by the studied rocks are estimated to be in the range of 160 to 200°C. Tectonically‐driven flux of hot fluids and associated diagenetic products are interpreted to have initiated during the Late Cretaceous maximum burial and lasted until the Oligocene–Miocene compressional tectonics and related uplift. The circulation of such hydrothermal brines led to partial dissolution of dolomites (Dc2 and Ds) and to precipitation of hydrothermal calcite C1 in new (mainly oriented north–south; F3) and pre‐existing, reactivated fractures. The integration of the obtained data confirms that the diagenetic evolution was controlled primarily by the interplay of the burial thermal evolution of the basin and the regional tectonic history. Hence, this contribution highlights the impacts of regional tectonics and basin history on diagenetic processes, which may subsequently affect reservoir properties.