A model for the constant-head pumping test conducted in vertically fractured media

An analytical model for the constant-head pumping test is developed for a partially penetrating well that has a finite thickness skin, and intersects a single vertical fracture. In the model, the fracture is fully confined and flow occurs only in the fracture. The model is developed using Laplace transform and finite Fourier transform methods. The model is to be used for analysing well test data from vertically fractured media and for verifying numerical models. Dimensionless curves are used to study the effects of a finite thickness skin and a partially penetrating wellbore. In the presence of a finite thickness skin, or a partially penetrating wellbore, a typical flow response for the constant-head pumping test has three distinct periods of flow corresponding to small-, intermediate- and large-time. Small- and large-time approximations are presented for the model. For tests where the wellbore is fully penetrating, or the partial penetration ratio is known, these approximations can be used to analyse field data.     

An analysis of failure mechanism constraints on pre-failure rock block deformation using TLS and roto-translation methods

Rockfall hazards increase the risk of train derailment along railway corridors in western Canada. In this study, repeated terrestrial laser scanning (TLS) datasets were collected every 2–3 months at three different sites along the Thompson and Fraser River corridors in British Columbia, referred to as the Goldpan, White Canyon, and Mile 109 sites. A total of 207 rockfall events occurring across all three sites between November 11, 2014 and October 18, 2016 were recorded in a database. For each of these rockfalls, pre-failure deformation was measured using a method of three-dimensional roto-translation block tracking. Each rockfall was classified by its deformation behaviour and further categorised based on failure mechanism, volume, lithology, and the roughness condition of the failure plane. Results reveal that detectable levels of deformation were measured in 33% of the total number of rockfall events using the present methods. Rotation deformation was most commonly observed in toppling failures with relatively steep joint orientations. Conversely, planar sliding blocks generally exhibited the least measurable deformation, with the majority not showing any precursory translation or rotation. It is postulated that overhanging rockfall configurations may suppress the expression of deformation in rockfall source blocks, though additional research is required to confirm this.     

Ammonium excretion by benthic invertebrates and sediment-water nitrogen flux in the Gulf of Mexico near the Mississippi River outflow

Benthic macroinvertebrate biomass and ammonium excretion rates were measured at four stations in the Gulf of Mexico near the Mississippi River mouth. Calculated areal excretion rates were then compared to sediment-water nitrogen fluxes measured in benthic bottom lander chambers at similar stations to estimate the potential importance of macroinvertebrate excretion to sediment nitrogen mineralization. Excretion rates for individual crustaceans (amphipods and decapods) was 2–21 nmoles NH₄ ⁺ (mg dry weight)^?1 h^?1. The mean excretion rates for the polychaetes, Paraprionaspio pinnata [6–12 nmoles NH₄ ⁺ (mg dry weight)^?1h^?1] and Magelona sp. [27–53 nmoles NH₄ ⁺ (mg dry weight)^?1h^?1], were comparable or higher than previous measurements for similar size benthic or pelagic invertebrates incubated at the same temperature (22±1°C). Although the relatively high rates of excretion by these selective feeders may have been partially caused by experimental handling effects (e.g., removal from sediment substrates), they probably reflected the availability of nitrogen-rich food supplies in the Mississippi River plume. When the measured weight-specific rates were extrapolated to total areal biomass, areal macroinvertebrate excretion estimates ranged from 7 μmole NH₄ ⁺ m^?2h^?1 at a 40-m deep station near the river mouth to 18 μmole NH₄ ⁺ m^?2h^?1 at a shallower (28-m deep) station further from the river mouth. The net flux of ammonium and nitrate from the sediments to the water measured in bottom lander chambers in the same region were 15–53 μmole NH₄ ⁺ m^?2h^?1 and ?25–21 μmole NO₃ ^? m^?2h^?1. These results suggest that excretion of NH₄ ⁺ by macroinvertebrates could be a potentially important component of benthic nitrogen regeneration in the Mississippi River plume-Gulf shelf region.     

Seismicity in the vicinity of Ross Island, Antarctica

Earthquakes in the Ross Sea, Antarctica, are of two types: volcanic, and those which appear to be of tectonic origin. Volcanic events in the vicinity of Ross Island are associated exclusively with Mount Erebus, Ross Island; this volcano erupts regularly, generating several earthquakes per day whose characteristics are quite distinct from non-volcanic events. These nonvolcanic earthquakes are recognizable by their distinct P- and S-wave arrivals, and a lack of the high frequency, often monochromatic character typical of Erebus events.One hundred fifty-seven tectonic microearthquakes (M < 2.0) were recorded in 1983 and 1984 by the ten station network on Ross Island; these events were located using the least-squares routine, HYPOELLIPSE. Of these events, 106 have RMS residual traveltime errors of less than or equal to 0.6 seconds; they are clustered in the vicinity of Ross Island, but are not restricted to it. There is a linear trend of epicenters cutting across the island and continuing northward. Most activity seems to center beneath Mount Terra Nova, between Mount Erebus and Mount Terror. Mean depth for events is 8.2 km; however, depths are rather evenly distributed over a range of 0 to 25 km.Modelling based on Bouger gravity anomalies and seismic refraction studies indicates a depth to the Moho of about 40 km beneath the continent, shallowing to 27 km beneath the Ross Sea. This 27 km depth is approximately equal to the lower limit of the tectonic seismicity detected by the Erebus network; hence, events are of crustal origin. These data suggest, with the rift-type geochemistry of Erebus' magma, that the Ross Sea is a site of active crustal extension and rifting.     

MAGNETISM OF METEORITES: A REVIEW OF RUSSIAN STUDIES

We present here a summary review of the work of Russian scientists, primarily Gus'kova and Pochtarev, on the magnetism of meteorites. They have measured the initial natural remanent magnetization and the magnetic susceptibility in more than 900 meteorite samples from collections throughout the Soviet Union. More sophisticated studies, involving both thermal and alternating field demagnetization experiments, were also conducted on a few samples. Meteorites almost invariably retain evidence of ancient magnetic fields in their pre-terrestrial history     

Development of a Continental Volcanic Field: Petrogenesis of Pre-caldera Intermediate and Silicic Rocks and Origin of the Bandelier Magmas, Jemez Mountains (New Mexico, USA)

The Miocene–Quaternary Jemez Mountains volcanic field(JMVF) is the site of the Valles caldera and associated BandelierTuff. Caldera formation was preceded by > 10 Myr of volcanismdominated by intermediate composition rocks (57–70% SiO₂)that contain components derived from the lithospheric mantleand Precambrian crust. Simple mixing between crust-dominatedsilicic melts and mantle-dominated mafic magmas, fractionalcrystallization, and assimilation accompanied by fractionalcrystallization are the principal mechanisms involved in theproduction of these intermediate lavas. A variety of isotopicallydistinct crustal sources were involved in magmatism between13 and 6 Ma, but only one type (or two very similar types) ofcrust between 6 and 2 Ma. This long history constitutes a recordof accommodation of mantle-derived magma in the crust by meltingof country rock. The post-2 Ma Bandelier Tuff and associatedrhyolites were, in contrast, generated by melting of hybridizedcrust in the form of buried, warm intrusive rocks associatedwith pre-6 Ma activity. Major shifts in the location, styleand geochemical character of magmatism in the JMVF occur withina few million years after volcanic maxima and may correspondto pooling of magma at a new location in the crust followingsolidification of earlier magma chambers that acted as trapsfor basaltic replenishment. KEY WORDS: crustal anatexis; fractional crystallization; Jemez Mountain Volcanic Field; Valles Caldera; radiogenic isotopes; trace elements     

Pleistocene climatic change in Southern Australia and its effect on speleothem deposition in some Nullarbor caves

Activity ratios of ²³⁴U/²³⁸U, ²³⁰Th/²³⁴U, and ²³⁰Th/²³²Th have been determined for calcite, gypsum and halite speleothems from caves of the Nullarbor Plain, mostly in the area N and NW of Mundrabilla Station, for the purpose of U-series dating. All calcite speleothems contain adequate amounts of uranium for dating, but some show an excess of ²³⁰Th. Stratigraphic relationships indicate that there were at least three phases of calcium carbonate deposition in the Nullarbor caves. The calcite samples, with one possible exception, have ages in excess of ca. 400000 yrs BP. This suggests that no significant amounts of calcium carbonate deposition have taken place during the last 400ka. At present, active deposition of speleothems is restricted almost entirely to gypsum and halite. The only gypsum speleothem dated was found to have a finite age of ca. 185 ka. Six dates on a small halite speleothem containing insect and arachnid remains indicate that it formed rapidly during Holocene time.     

Contaminant migration in a regular two- or three-dimensional fractured network: Reactive contaminants

A semi-analytic solution for the migration of dilute reactive contaminant species in a fractured medium having a one-, two- or three-dimensional fracture network is presented. The application of the technique to practical problems is discussed and illustrated by examples. The effects of sorption in the matrix and on the surface of the fractures are considered for a range of parameters. It is demonstrated that the synergistic interaction of the various parameters is such that the effect of changing a single variable may not be immediately obvious and a designer should perform computations for the range of expected parameters to determine the maximum impact. For example, it is shown that it is not necessarily conservative to consider only one-dimensional or only three-dimensional diffusion into the matrix; which of these cases is most critical will depend on the values of other parameters. It is also shown that an effective leachate collection system may significantly reduce the impact of those contaminants which do escape into the fractured media.