Unlocking the applications of automated mineral analysis

Identifying and quantifying the relative abundance of minerals is a fundamental part of many aspects of both pure and applied geology. Historically, quantitative mineralogy could be achieved using optical microscopy and point counting. This is a slow and operator dependent process, and practically impossible to achieve in, for example, very fine grained samples. Over the last decade a range of automated mineralogy technologies have arisen from the global mining industry and are being increasingly used in other branches of geology. These technologies, based on scanning electron microscopy with linked energy dispersive spectrometers, have the potential to revolutionise how we quantify mineralogy. In addition, during measurement, the sample textures are also captured, providing a wealth of valuable data for the geologist. In this article we review the current state of automated mineralogy and highlight the many areas of application for this technology.     

William Smith's map brought alive by digital remastering

The geological mapping carried out by William Smith, which resulted in the publication of his famous map in 1815, was remarkable in many respects, not least because it relied on him being able to make consistent and accurate observations on the rock types he encountered during his fieldwork. This ability, gained from his many years studying rocks, allowed him to observe features with his own eyes (or at the very least, with the aid of a simple magnifying device) that others could not. We take a new look at William Smith's original stratigraphical sequences, and with samples collected from his classic field areas (many of which are around the city of Bath, Somerset, UK), demonstrate how spatial mineralogy mapping can be incorporated into the modern age of digital mapping.     

Carbonate concretions—explained

Carbonate concretions are common features of sedimentary rocks of all geological ages. They are most obvious in sandstones and mudstones as ovoid bodies of rock that protrude from natural outcrops: clearly harder or better cemented than their host rocks. Many people are excited by finding fossils in the centre of mudstone‐hosted concretions ( Fig. 1 ) but spend little time wondering why the fossils are so well preserved. While the study of concretions has benefitted from the use of advanced analytical equipment, simple observations in the field can also help to answer many questions. For example, in cliff sections, original sedimentary beds and sedimentary structures can be traced right through concretions ( Fig. 2 ): so it can be deduced that the concretion clearly formed after these depositional structures were laid down. In this article we explain how and where concretions form and discuss the evidence, ranging from outcrop data to sophisticated laboratory analyses, which can be used to determine their origins. The roles of microbes, decaying carcasses, compaction and groundwaters are highlighted. Concretions not only preserve fossils but can also subdivide oil, gas and water reservoirs into separate compartments.

Figure 1 Open in figure viewer PowerPoint An early diagenetic carbonate concretion split in half to reveal an ammonite retaining its original aragonite shell, from the Maastrichtian of Antarctica. Image courtesy of Alistair Crame (British Antarctic Survey, NERC). Lens cap is 6 cm.     

Forensic geology in serious crime investigation

CSI, Silent Witness , and a host of other recent television dramas have highlighted the role of science in serious crime investigation and detection. Although many 'real' forensic scientists wince at the media portrayal of their discipline, the programmes have led to a wider understanding of the role of different branches of science in criminal investigations. This is not always a good thing, as 'career' or 'professional' criminals will work very hard at being forensically aware to avoid detection, hence any credible forensic scientist might want to be at best a little reticent as to what they do and how they do it. However, in the UK court system evidence presented by the Prosecution team has to be disclosed to the defence and to be open to challenge in court. This article aims to show, in the broadest of terms, how geology is becoming used increasingly in the detection of serious crime.     

Forensic geology at the International School Science Fair 2013

In July 2013 the International School Science Fair (ISSF) was hosted by Camborne Science and International Academy, Cornwall, UK. This meeting brings young talented scientists together from around the world to participate in workshops and activities highlighting current scientific developments. As part of ISSF 2013, a workshop on forensic geology was delivered to some of the international participants. This included the preparation of a map to show the mineralogical composition of the soils of the participating schools. The soil mineralogy was determined using automated mineral analysis based on scanning electron microscopy. In addition there were workshops on the recovery of geological trace evidence in a forensic context and the theory and practice of carrying out a geophysical search for hidden items. Data generated as part of this workshop are available to download from the International Union of Geological Sciences, Initiative on Forensic Geology website ( http://www.forensicgeologyinternational.com ).     

Mineralogical and geochemical signature of mine waste contamination, Tresillian River, Fal Estuary, Cornwall, UK

The mineralized district of SW England was one of the world's greatest mining areas, with mining commencing in the Bronze age, peaking in the 1850s to 1890s, but still continuing to the present day. Consequently, it is not surprising that mining has had a major impact on the environmental geochemistry of SW England. In this study, the mineralogical and geochemical signature of mine waste contamination within the Fal Estuary at Tresillian, Cornwall, has been examined. A pulse of mine waste contamination is recognized at approximately 50?cm below present day sediment surface. Sn, As, Cu, Pb, and Zn are all enriched within this contaminated interval with up to 1800 mg?kg^–1 Sn, 290 mg?kg^–1 As, 508 mg?kg^–1 Pb, 2210 mg?kg^–1 Zn, and 1380 mg?kg^–1 Cu. Within this interval, the dominant minerals present include chalcopyrite, arsenopyrite, pyrite, cassiterite, Fe–Ti oxides (ilmenite and ?rutile), wolframite, sphalerite, baryte, zircon, monazite, tourmaline and xenotime. In addition, man-made slag products commonly occur. The exact timing of the release of mine waste into the estuary is poorly constrained, but probably occurred during or immediately following the peak in mining activity in the nearby Camborne-Redruth district, which was between 1853 and 1893. The mine waste may have entered the estuary either via the Tresillian River and its tributaries or via Calenick Creek and the Truro River and/or the Carnon River which flows into Rostronguet Creek.     

The spatial distribution and source of arsenic, copper, tin and zinc within the surface sediments of the Fal Estuary, Cornwall, UK

ABSTRACT Estuarine sediments commonly form major sinks for contaminants released during industrial activity. Many industrial processes lead to the release of metals initially in solution, which can then be adsorbed on to, for example, Fe hydroxides or clay minerals. However, in the mining industry, there are two major contaminant waste streams: (1) metals discharged in solution via mine drainage; and (2) particulate grains of the ore‐forming or related minerals released after ore processing. The release of particulate waste can have a major long‐term impact on environmental geochemistry. In this study, we have mapped the distribution of arsenic, copper, tin and zinc within the surficial sediments of the Fal Estuary, Cornwall, UK, an area that drains a historically important polymetallic mining district. There are clear spatial variations in the contaminants, with the highest levels (> 2800 p.p.m. As, > 5000 p.p.m. Cu, > 3000 p.p.m. Sn and > 6000 p.p.m. Zn) within Restronguet Creek on the western side of the estuary. Mineralogical studies show that small (< 20 µm) grains of detrital arsenopyrite, chalcopyrite, cassiterite and sphalerite are very abundant within the surface sediments. Most of the sulphide grains are fractured, but mineralogically unaltered, although some grains show alteration rims caused by oxidation of the sulphides. The geochemistry and mineralogy are indicative of sediment supply from the discharge of particulate waste into the estuary during historical mining activity. Subsequently, this particulate waste has been largely physically and biologically reworked within the surface sediments. Although considerable effort has been made to minimize contaminants released via mine drainage into the estuary, the potential flux of contaminants present within the intertidal and subtidal sediments has not been addressed. Benthic invertebrates living within the area have adapted to be metal tolerant, and it is likely that the dominant source of bioavailable metals is a result of alteration of the particulate mine waste present within the intertidal and subtidal sediments.     

Alluvial records of medieval and prehistoric tin mining on Dartmoor,southwest England

The role of tin mining in the society of prehistoric Dartmoor and its impact on the local landscape have long been discussed despite equivocal evidence for prehistoric mine sites. A fluvial geomorphological approach, using floodplain stratigraphy, combined with sediment geochemistry and mineralogy, was employed to identify prehistoric tin mining at the catchment scale. Waste sediment, released during hydraulic mining of alluvial tin deposits, caused downstream floodplain aggradation of sands with a diagnostic signature of elevated Sn concentration within the silt fraction. At a palaeochannel site in the Erme Valley, sediment aggradation buried datable peat deposits. A period of aggradation postdating cal. A.D. 1288–1389 is consistent with the 13th century peak in tin production identified in the documentary record. An earlier phase of aggradation, however, occurred between the 4th and 7th centuries A.D., providing evidence of late Roman or early Post Roman tin mining activity on Dartmoor. © 2004 Wiley Periodicals, Inc.     

Geochemical signature of historical mining: Fowey Estuary, Cornwall, UK

Geochemical analyses of intertidal sediments from the northern part of the Fowey Estuary, Cornwall, UK, reveal a clear pulse in Sn concentration in sediments which predate 1880. Sn concentrations at the base of the cores increase rapidly to peak values of 1200 ppm and then decrease to values of 200 ppm at the present-day sediment surface. The mineralogy of the sediments is consistent with an origin from the release of mine waste from tin streaming and smelt products into the estuary. Further to the south, the down-core geochemistry of the estuary sediments is uniform with values of typically 400 ppm. This is interpreted as due to the natural reworking of the recognised pulse in particulate mine waste seen to the north.