An Example of Island-Arc Petrogenesis: Geochemistry and Petrology of the Southern Luzon Arc, Philippines

Volcanism throughout the Luzon arc is associated with eastwardsubduction of the South China Sea floor along the Manila Trench.The southern section of the arc, the focus of this study, extendsfrom the Lingayen-Dingalan fault to the small islands just southof Luzon. Two segments appear to exist along this section ofthe arc the northern Bataan and southern Mindoro segments whichare separated by the Macolod Corridor. The volcanic rocks have typical arc phenocryst mineralogies:olivine, clinopyroxene, plagioclase, and titanomagnetite inthe most mafic rocks and clinopyroxene, plagioclase, orthopyroxene,titanomagnetite, ? amphibole in the more felsic samples. Complexzoning, sieve textures, and decoupling of incompatible traceelements suggest that processes such as assimilation have takenplace. The rocks from the study area range from basalts to rhyolitesand show typical calc-alkaline features. The rocks of the MacolodCorridor and Mindoro segment are particularly enriched in largeion lithophile elements (LILE), light rare earth elements (LREE),and radiogenic Sr compared with the Bataan segment. The datafall within the mantle array on Sr-Nd isotopic diagrams andgrade toward higher Sr and lower Nd isotopic values from northto south. A likely source for the volcanics of this study is either amid-ocean ridge basalt (MORB)-type mantle that undergoes higherdegrees of partial melting than regions involved in MORB generationor a previously depleted source. We suggest that the high fieldstrength element (HFSE) anomalies have been derived throughdifferential element partitioning during fluid transport fromthe subducted lithosphere to the mantle wedge. Continental crustal material seems to play a significant roleparticularly in the Macolod Corridor and the Mindoro segment,based on the high LILE, La/Sm ratios, radiogenic Sr isotopes,and ¹⁸O values. The Macolod Corridor and the Mindoro segmenthave undergone source contamination by crustal material fromthe North Palawan-Mindoro crustal block either during the collisionof this block with the Manila Trench or by subduction of sedimentsrich in this crustal material. A similar component has alsobeen detected in the Bataan segment but in minor amounts. Thetrace element and isotopic differences between the northernand southern sections of the arc are interpreted in terms ofvariable composition (i. e., variable amounts of a crustal componentintroduced from the Palawan-Mindoro crustal terrain) of themetasomatic fluids released into the source.     

New compositional and optical data for antimonian and bismuthian varieties of hemusite from Japan

Summary New compositional and optical data are reported for antimonian and antimonianbismuthian varieties of hemusite from epithermal Au-Ag-Cu deposits in Japan. The empirical formula for the antimonian variety, from the Iriki mine is: (Cu_5.83Fe_0.14Ag_0.01)_5.98Mo_1.03(Sn_0.54Sb_0.41Te_0.03Bi_0.02)_1.00(S_7.85Se_0.15)_8.00, and that of the Sb-Bi variety from the Kawazu mine is: (Cu_5.84Fe_0.14Ag_0.01)_5.99Mo_1.03(Sn_0.82Sb_0.11Bi_0.l0Te_0.04)_1.07(S_7.80Se_0.12)_7.92. The theoretical formula of hemusite is Cu⁺ ₄Cu²⁺ ₂MO⁴⁺Sn⁴⁺S₈, whilst the most probable formula of the Iriki hemusite is Cu⁺ _4.5CU²⁺ _1.5Mo⁴⁺Sn⁴⁺ _0.5Sb⁵⁺ _0.5S₈, with Sb⁵⁺ substituting for Sn⁴⁺ and forming (SbS₄)^3– tetrahedra as might be expected, given that the metal to sulphur ratio is 1, and given the sphalerite-like structure of the mineral. However Bi³⁺ cannot be so accommodated, resulting in a deficiency in (S + Se) for Kawazu hemusite. Reflectance spectra for both are compared with those of the tungsten analogue (compositional) of hemusite, kiddcreekite. The relationship between hemusitesensu stricto and these newly reported varieties is discussed in terms of simple and coupled chemical substitutions, and inferences are drawn on the valency of Sb, Bi, Mo and Cu in the hemusite structure.

---

Neue chemische und optische Daten für antimon- und bismuthführende Varietäten von Hemusit aus Japan

Zusammenfassung Neue chemische und optische Daten für antimon- und bismuthführende Hemusite auf epithermalen Au-Ag-Cu Lagerstätten in Japan werden vorgelegt. Die empirische Formel für die antimon-führende Varietät aus der Iriki-Mine ist: (Cu_5.83Fe_0.14Ag_0.01)_5.98Mo_1.03(Sn_0.54Sb_0.41Te_0.03Bi_0.02)_1.00 (S_7.85Se_0.15)_8.00, und die der Sb-Bi Varietät aus der Kawazu Mine ist: (Cu_5.84Fe_0.14Ag_0.01)_5.99M0_1.03(Sn_0.82Sb_0.11Bi_0.l0Te_0.04)_1.07 (S_7.80Se_0.12)_7.92. Die theoretische Formel von Hemusit ist Cu⁺ ₄Cu²⁺ ₂Mo⁴⁺Sn⁴⁺S₈, während die wahrscheinlichere Formel für den Hemusit von Iriki Cu⁺ ₄Cu²⁺ _1.5Mo⁴⁺Sn⁴⁺ _0.5Sb⁵⁺ _0.5S₈, mit Sb⁵⁺ an der Stelle von Sn⁴⁺, das(SbS₄)^3– Tetraeder bildet, wie zu erwarten ist, unter der Voraussetzung, da das Metall zu Schwefelverhältnis 1 und die Struktur sphaleritähnlich ist. Bi³⁺ kann jedoch nicht in dieser Weise untergebracht werden, und das führt zu einem Mangel an (S + Se) für den Hemusit von Kawazu. Die Reflektions-Spektren beider Minerale werden mit denen des Wolfram-Equivalents von Hemusit (Kiddcreekit) verglichen. Die Beziehung zwischen Hemusitsensu stricto und diesen jetzt beschriebenen Varietäten wird auf der Basis einfacher und gekoppelter chemischer Substitution diskutiert. Auf dieser Basis werden Schlüsse auf die Valenz von Sb, Bi Mo und Cu in der Hemusit-Struktur gezogen.

     

Modeling of water–rock interactions in an aquitard of sandy clay in the coastal area near Beihai,China

Unconsolidated sand, gravel and clay deposits near Beihai and in the Leizhou Peninsula in southern China form an unconfined aquifer, aquitard and a confined aquifer. Water and soil samples were collected from the two aquifers in the coastal Beihai area for the determination of chemical compositions, minerals and soluble ions. Hydrogeochemical modeling of three flow paths through the aquitard are carried out using PHREEQC to determine water–rock interactions along the flow paths. The results indicate that the dissolution of anorthite, fluorite, halite, rhodochrosite and CO₂, and precipitation of potash feldspar and kaolinite may be occurring when groundwater leaks through the aquitard from the unconfined aquifer to the confined aquifer. Cation exchanges between Na and Ca can also happen along the flow paths.     

An experimental study of the grain-scale processes of peridotite melting: implications for major and trace element distribution during equilibrium and disequilibrium melting

The grain-scale processes of peridotite melting were examined at 1,340°C and 1.5 GPa using reaction couples formed by juxtaposing pre-synthesized clinopyroxenite against pre-synthesized orthopyroxenite or harzburgite in graphite and platinum-lined molybdenum capsules. Reaction between the clinopyroxene and orthopyroxene-rich aggregates produces a melt-enriched, orthopyroxene-free, olivine + clinopyroxene reactive boundary layer. Major and trace element abundance in clinopyroxene vary systematically across the reactive boundary layer with compositional trends similar to the published clinopyroxene core-to-rim compositional variations in the bulk lherzolite partial melting studies conducted at similar P–T conditions. The growth of the reactive boundary layer takes place at the expense of the orthopyroxenite or harzburgite and is consistent with grain-scale processes that involve dissolution, precipitation, reprecipitation, and diffusive exchange between the interstitial melt and surrounding crystals. An important consequence of dissolution–reprecipitation during crystal-melt interaction is the dramatic decrease in diffusive reequilibration time between coexisting minerals and melt. This effect is especially important for high charged, slow diffusing cations during peridotite melting and melt-rock reaction. Apparent clinopyroxene-melt partition coefficients for REE, Sr, Y, Ti, and Zr, measured from reprecipitated clinopyroxene and coexisting melt in the reactive boundary layer, approach their equilibrium values reported in the literature. Disequilibrium melting models based on volume diffusion in solid limited mechanism are likely to significantly underestimate the rates at which major and trace elements in residual minerals reequilibrate with their surrounding melt. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

High-sensitive measurement of uranium LIII-edge X-ray absorption near-edge structure (XANES) for the determination of the oxidation states of uranium in crustal materials

The uranium L_III-edge XANES spectra for natural rocks at the concentration range of 0.96–124 mg kg⁻¹ were measured using a log spiral bent crystal Laue analyzer (BCLA) combined with a multi-element Ge detector. It was found that the quality of the XANES spectra using the BCLA was greatly improved due to a reduction of interfering fluorescence from major components such as Rb and Sr. The ratio of signal to background intensities in the U L_III-edge XANES spectra increased by a factor of 2.9–17 with the use of the BCLA, which greatly enhanced the detection limit for the speciation of the oxidation states of U or the U(IV)/U(VI) ratio of natural samples. In addition, it was demonstrated that the fluorescence XANES method coupled with the BCLA enable determination of the speciation of U for various natural samples such as acidic igneous rocks, ferromanganese nodules, sediments, and some sedimentary rocks such as shale and limestone.     

Crystal chemical significance of chemical zoning in dissakisite-(Ce)

Dissakisites from Trimouns dolomite mine, France, have two kinds of single crystals: chemical-zoned and homogeneous types. Back-scattered electron microprobe (BSE) images of these dissakisites reveal both Ca–Al rich dark zones and Fe-ΣREE rich bright zones. Crystal structures of three dark and two bright zones in a chemical-zoned dissakisite and of a homogeneous zone in unzoned dissakisite were refined to individual R indices (about 3.0–5.0%) based on 1,400 observed [|F ₀| > 4σF ₀] reflections measured with MoKα X-radiation using the single crystal diffractometer. The differences in brightness between their BSE images arise from those in coupled substitutions of the elements occupying A2 and M3 sites. The main reason for these differences is that ten-coordinated A2 polyhedra and M3 octahedra are directly linked through their shared edge, which creates a great potential for making this coupled substitution. This zoning indicates that formation of the whole zoned crystal, where each zone could be grown steadily with its crystallographic axes mutually parallel to each other, may be identified as autoepitaxy.     

Diel Patterns in Chlorophyll <Emphasis Type="Italic">a</Emphasis> Specific Absorption Coefficient and Absorption Efficiency Factor of Picoplankton

Diel patterns in the chlorophyll a specific absorption coefficient of surface picoplankton, a*_pico (γ) (m²·[mg chlorophyll a]⁻¹), were studied at 7 stations under daily cycle of in situ light condition in the western subarctic Pacific and Japan Sea. All the data were normalized by dividing the anomaly with daily averaged a*_pico (γ). Opposite diel patterns were observed for the normalized a*_pico (443) and a*_pico (675) with maximum toward dawn or dusk and minimum toward midday at 4 stations under low-irradiance (LI) conditions and vice versa at 3 stations under high-irradiance (HI) conditions. The absorption efficiency factors at red absorption peak, Q _a (675), were determined by reconstruction with intracellular chlorophyll a concentration and cell diameter. The normalized Q _a (675) also showed diel pattern with maximum toward midday and minimum toward dawn or dusk under LI. The diel pattern in a*_pico (675) and Q _a (675) were primarily caused by changes in intracellular chlorophyll a concentration due to photoadaptation under LI. The diel pattern in a*_pico (443) was influenced by pigmentation, as recognized by blue to red ratio [a*_pico (443)/a*_pico (675)] under HI. This study proposed that the opposite diel pattern in a*_pico (γ) might occur for a wide range of algal species. The results presented here have important consequences for the interpretation of diel variations in optical properties observed in the open ocean.     

CO<Subscript>2</Subscript> Flux Measurements over the Sea Surface by Eddy Correlation and Aerodynamic Techniques

The measurements of the vertical transport of CO₂ were carried out over the Sea of Japan using the specially designed pier of Kyoto University on September 20 to 22, 2000. CO₂ fluxes were measured by the eddy correlation and aerodynamic techniques. Both techniques showed comparable CO₂ fluxes during sea breeze conditions: −0.001 to −0.08 mg m⁻²s⁻¹ with the mean of −0.05 mg m⁻²s⁻¹. This means that the measuring site satisfies the fetch requirement for meteorological observations under sea breeze conditions. Moreover, the eddy diffusivity coefficient used in the aerodynamic technique is found to be consistent with the coefficient used in the eddy correlation technique. The present result leads us to conclude that the aerodynamic technique may be applicable to underway CO₂ flux measurements over the ocean and may be used in place of the bulk technique. The important point is the need to maintain a measuring accuracy of CO₂ concentration difference of the order of 0.1 ppmv on the research vessels or the buoys.     

Roles of Biogeochemical Processes in the Oceanic Carbon Cycle Described with a Simple Coupled Physical-Biogeochemical Model

To evaluate the contribution of biogeochemical processes to the oceanic carbon cycle and to calculate the ratio of calcium carbonate to organic carbon downward export, we have incorporated biological and alkalinity pumps in the yoked high-latitude exchange/interior diffusion-advection (YOLDA) model. The biogeochemical processes are represented by four parameters. The values of the parameters are tuned so that the model can reproduce the observed phosphate and alkalinity distributions in each oceanic region. The sensitivity of the model to the biogeochemical parameters shows that biological production rates in the euphotic zone and decomposition depths of particulate matters significantly influence horizontal and vertical distributions of biogeochemical substances. The modeled vertical fluxes of particulate organic phosphorus and calcium carbonate are converted to vertical carbon fluxes by the biological pump and the alkalinity pump, respectively. The downward carbon flux from the surface layer to the deep layer in the entire region is estimated to be 3.36 PgC/yr, which consists of 2.93 PgC/yr from the biological pump and 0.43 PgC/yr from the alkalinity pump, which is consistent with previous studies. The modeled rain ratio is higher with depth and higher in the Pacific and Indian Oceans than in the Atlantic Ocean. The global rain ratio at the surface layer is calculated to be 0.14 to 0.15. This value lies between the lower and higher ends of the previous estimates, which range widely from 0.05 to 0.25. This study indicates that the rain ratio is unlikely to be higher than 0.15, at least in the surface waters.