A comparison of several wave spectra for the random wave diffraction by a semi-infinite breakwater

A comparison of the diffraction of multidirectional random waves using several selected wave spectrum models is presented in this paper. Six wave spectrum models, Bretschneider, Pierson–Moskowitz, ISSC, ITTC, Mitsuyasu, and JONSWAP spectrum, are considered. A discrete form for each of the given spectrum models is used to specify the incident wave conditions. Analytical solutions based on both the Fresnel integrals and polynomial approximations of the Fresnel integrals and numerical solutions of a boundary integral approach have been used to obtain the two-dimensional wave diffraction by a semi-infinite breakwater at uniform water depth. The diffraction of random waves is based on the cumulative superposition of linear diffraction solution. The results of predicted random wave diffraction for each of the given spectrum models are compared with those of the published physical model presented by Briggs et al. [1995. Wave diffraction around breakwater. Journal of Waterway, Port, Coastal and Ocean Engineering—ASCE 121(1), 23–35]. Reasonable agreement is obtained in all cases. The effect of the directional spreading function is also examined from the results of the random wave diffraction. Based on these comparisons, the present model for the analysis of various wave spectra is found to be an accurate and efficient tool for predicting the random wave field around a semi-infinite breakwater or inside a harbor of arbitrary geometry in practical applications.     

Nature of polymerization and properties of silicate melts and glasses at high pressure

The structures of sodium silicate and aluminosilicate glasses quenched from melts at high pressure (6-10 GPa) with varying degrees of polymerization (fractions of nonbridging oxygen) were explored using solid-state NMR [¹⁷O and ²⁷Al triple-quantum magic-angle spinning (3QMAS) NMR]. The bond connectivity in melts among four and highly coordinated network polyhedra, such as ^[4]Al, ^[5,6]Al, ^[4]Si, and ^[5,6]Si, at high pressure is shown to be significantly different from that at ambient pressure. In particular, in the silicate and aluminosilicate melts, the proportion of nonbridging oxygen (NBO) generally decreases with increasing pressure, leading to the formation of new oxygen clusters that include 5- and 6-coordinated Si and Al in addition to 4-coordinated Al and Si, such as ^[4]Si-O-^[5,6]Si, ^[4]Si-O-^[5,6]Al and Na-O-^[5,6]Si. While the fractions of ^[5,6]Al increase with pressure, the magnitude of this increase diminishes with increasing degrees of ambient-pressure polymerization under isobaric conditions. Incorporating the above structural information into models of melt properties reproduces the anomalous pressure-dependence of O²⁻ diffusivity and viscosity often observed in silicate melts.     

Interdecadal Variability of East Asian Summer Monsoon Precipitation over 220 Years （1777-1997）

In this study, long-term (1777–1997) precipitation data for Seoul, Korea, wetness indices from eastern China, and modern observations are used to identify the interdecadal variability in East Asian summer monsoon precipitation over the last 220 years. In the East Asian monsoon region, two long-term timescales of dry–wet transitions for the interdecadal variability and quasi-40-and quasi-60-year timescales are dominant in the 220-year precipitation data of Seoul, as well as in the wetness indices over China....     

A Closure Study of Aerosol Hygroscopic Growth Factor during the 2006 Pearl River Delta Campaign

Measurements of aerosol physical, chemical and optical parameters were carried out in Guangzhou, China from 1 July to 31 July 2006 during the Pearl River Delta Campaign. The dry aerosol scattering coefficient was measured using an integrating nephelometer and the aerosol scattering coefficient for wet conditions was determined by subtracting the sum of the aerosol absorption coefficient, gas scattering coefficient and gas absorption coefficient from the atmospheric extinction coefficient. Following this, the aerosol hygroscopic growth factor, f(RH), was calculated as the ratio of wet and dry aerosol scattering coefficients. Measurements of size-resolved chemical composition, relative humidity (RH), and published functional relationships between particle chemical composition and water uptake were likewise used to find the aerosol scattering coefficients in wet and dry conditions using Mie theory for internally- or externally-mixed particle species [(NH₄)₂SO₄, NH₄NO₃, NaCl, POM, EC and residue]. Closure was obtained by comparing the measured f(RH) values from the nephelometer and other in situ optical instruments with those computed from chemical composition and thermodynamics. Results show that the model can represent the observed f(RH) and is appropriate for use as a component in other higher-order models.     

Effects of flexibility on propulsive force acting on a heaving foil

The hybrid Cartesian/immersed boundary method is applied to simulate effects of flexibility on propulsive force acting on a heaving foil in a viscous flow. Immersed boundary nodes are distributed inside an instantaneous fluid domain. Velocity vector is reconstructed at the immersed boundary node based on an interpolation along a local normal line. Using the staggered/non-staggered grid method, the demand for pressure at boundary nodes is removed. Elastic deformation of the flexible foil is modelled based on the dynamic thin-plate mechanics. The developed code is validated through comparisons with other computations on flow fields around a flapping foil. The generation of the reverse Karman vortex street is investigated. Forces acting on heaving foils are compared for flexible and rigid cases and the increased thrust of the flexible foil is attributed to the deformed configuration near the tip. The flexibility of the heaving foil decreases vertical force and improves propulsion efficiency. The variations of force and deformation are investigated according to bending stiffness of the foil.     

Late Paleozoic tectonic evolution in northern Korean Peninsula

Since Late Proterozoic era, the Korean Peninsula has been evolved into a state with relatively stable regions and orogenic belts which were developed differently each other. The Late Paleozoie （Late Carboniferous-Early Triassic） sediments are well developed in the Korean Peninsula, and called the Pyongan System. The Pyongan System from Late Carboniferous to Lower Triassic is distributed in the Pyongnan and Hyesan-Riwon Basins, and Rangrim Massif, and divided into Hongjom （ C2 ）, Ripsok （ C2 ）, Sadong （ C2-P1 ）, Kobangsan and Rokam （Taezhawon） （P2-T1） sequences. The sediments of the Tumangang Orogenic Belt are called Tuman System which is composed of the Amgi Series, consisting of elastic formation with mafic effusive material, overlaid by the Kyeryongsan Series, consisting mainly of marie volcano sediments. The Songsang Series which rests on the Kyeryongsan Series mainly consists of elastic formation with minor felsic effusive material. In the Tumangang Orogenic Belt the tectonic movement, called Tumangang Tectonic Movement, occurred in the Lower Permian-Lower Triassic.     

Comparison of sedimentation-compression curves obtained by nuclear and gravimetric methods for Wilkinson Basin,Gulf of Maine,sediments

Accurate measurements of bulk density are important in the construction of sedimentation-compression curves of water-saturated, fine-grained cohesive sediments for consolidation studies. The bulk density of five cores was measured nondestructively on a laboratory nuclear transmission densitometer and the water content, expressed as void ratio, was derived from an empirical relationship between bulk density and water content. Bulk density and water content measured destructively was determined every 10 cm for a comparison with the nuclear data. Agreement between nuclear and gravimetric methods was within ± 0.02 g/cm³ for bulk density ranging from 1.2 to 1.4 g/cm³. Sedimentation-compression curves made using both methods were in generally good agreement.In the Wilkinson Basin, void ratio gradually decreases with increasing effective overburden pressure. This indicates that consolidation by dewatering the surficial sediments is normal and that the environmental conditions during deposition remained relatively constant.     

沙尘分析及等离子空气清洁系统沙尘去除效果的评价

本研究对在中国和韩国采集的沙尘的粒径分布及质量浓度进行了测定,使用黄沙标准物质对基于静电沉降原理的等离子空气清洁系统的去除沙尘效率进行了评价。本研究所使用的黄沙采集于北京和汉城,其粒径中值在7.0~80μm之间,浓度范围为300~1462μg·m^-3。在单通道测试中,沙尘去除效果随粒径增大和流速降低而增加。系统速度为1.0m·s^-1时,去除率大于80%。在27m2的房间中,进行多通道测试时,浓度为300μg·m^-3的大气颗粒物仅用10min即可降至150μg·m^-3。因此,等离子空气清洁系统能够有效地去除沙尘及保持室内空气质量。     

Self-affinity dimensions of topography and its implications in morphotectonics: an example from Taiwan

This paper discusses the self-affinity dimensions of landscape surfaces at a short-range scale and the link to morphotectonic features of the young orogenic belts of Taiwan. The variogram method is adopted to estimate such parameters as the fractal dimension (D), the ordinate-intercept (γ) and the range (R) from data subsets of the digital elevation model (DEM) in a moving-window operation. The fractal morphology expressed by D and γ is found to be useful in defining geomorphic provinces that are related to tectonic features. The mountainous terrain is characterized by high gamma values and low fractal dimensions in contrast to the coastal plains where low gamma values and high fractal dimensions are found. A zone, defined by the fractal parameters (2.4<D<2.6 and 0<γ<2.4), is found to coincide with the most tectonically active zone of Taiwan. Active faults often occur at the boundary between landscapes with contrasting fractal patterns. In the flat lowlands along the western coast, the fractal morphology displays a west-facing amphitheatric pattern, which may be related to the indentation of the pre-Miocene Peikang Basement High. The fractal morphology may reflect some subtle changes in surface textures of a landscape sculpted by surface processes, which in turn are influenced by tectonic activities. The surface roughening and diffusive smoothing may concur to shape the landscape surface at the short ranges we discuss in this study.