Chemical weathering of carbonates and silicates in the Han River basin,South Korea

A detailed investigation of the fluvial geochemistry of the Han River system allows to estimate the rates of chemical weathering and the consumption of CO₂. The Han River drains approximately 26,000 km² and is the largest river system in South Korea in terms of both water discharge and total river length. It consists of two major tributaries: the North Han River (NHR) and the South Han River (SHR). Distinct differences in basin lithology (silicate vs. carbonate) between the NHR and SHR provide a good natural laboratory in which to examine weathering processes and the influence of basin geology on water quality. The concentrations of major elements and the Sr isotopic compositions were obtained from 58 samples collected in both summer and winter along the Han River system in both 2000 and 2006. The concentrations of dissolved loads differed considerably between the NHR and SHR; compared with the SHR, the NHR had much lower total dissolved solids (TDS), Sr, and major ion concentrations but a higher Si concentration and ⁸⁷Sr/⁸⁶Sr ratio. A forward model showed that the dissolved loads in the NHR came primarily from silicate weathering (55 ± 11%), with a relatively small portion from carbonates (30 ± 14%), whereas the main contribution to the dissolved loads in the SHR was carbonate weathering (82 ± 3%), with only 11 ± 4% from silicates. These results are consistent with the different lithologies of the two drainage basins: silicate rocks in the NHR versus carbonate rocks in the SHR. Sulfuric acid derived from sulfide dissolution in coal-containing sedimentary strata has played an important role in carbonate weathering in the SHR basin, unlike in the NHR basin. The silicate weathering rate (SWR) was similar between the NHR and SHR basins, but the rate of CO₂ consumption in the SHR basin was lower than in the NHR basin due to an important role of sulfuric acid derived from pyrite oxidation.     

The sediment-water interface increment due to the complex burrows of macrofauna in a tidal flat

The architecture of macrofaunal burrows and the total area of the sediment-water interface created by biogenic structure were investigated in the Donggeomdo tidal flat on the west coast of Korea. Resin casting methods were applied to recover burrows of four dominant species, Macrophthalmus japonicus, Cleistostoma dilatatum, Perinereis aibuhitensis, and Periserrula leucophryna, and whole burrows within the casting area at three sites in different tidal levels.P. leucophryna excavated the largest burrow in terms of a surface area among them. In the case of whole burrow casting, the space occupied by the biogenic structure was extended into deeper and expanded more greatly at the higher tidal level. In the uppermost flat, the burrow wall surface area within sediment was more extensive than the sediment surface area. Increased oxygen supply through the extended interface could enhance the degradation rates of organic carbon and also change the pathways of degradation. Quantifying the relationship between the extended interface and mineralization rate and pathway requires more extensive study.     

Limitations of the Korean conventional fisheries management regime and expanding Korean TAC system toward output control systems

In this paper, we focus on the status and trends of the current Korean fisheries management regime. Specifically, this paper briefly introduces the Korean conventional fisheries management regime (KCFMR) and discusses its problems and limitations. In describing policy evolution, this paper finds reasons why the Korean government has chosen a TAC system, an output control approach, besides input control approaches in force for almost a century. This paper also describes the evolution of the Korean TAC system, which is carrying out a pivotal role in Korean fisheries development, and analyzes problems of the Korean TAC system. Finally, this paper gives a perspective on expanding the Korean TAC system toward Output Control Systems (OCSs) such as Individual Quotas (IQs), Individual Vessel Quotas (IVQs), Individual Transferable Traps (ITTs), Community Quotas (CQs), and Individual Transferable Quotas (ITQs).     

Tephrostratigraphy and paleo-environmental implications of Late Quaternary sediments and interstitial water in the western Ulleung Basin, East/Japan Sea

Two piston cores, collected from the western Ulleung Basin of the East/Japan Sea, were used to investigate the Late Quaternary tephrostratigraphy, lithology, and mineralogy of the sediments, as well as the elemental composition of both sediments and interstitial water, and their paleo-environmental implications. The cores show two lapilli tephra layers and one rhyolitic ash layer at the boundaries between sedimentary lithofacies units I, II, and III. These layers can be correlated with the well-known Ulleung-Oki (ca. 9.3 ka; boundary of units I/II), Ulleung-Yamato (ca. 25–33 ka), and Aira-Tanzawa (ca. 25.1 ka; boundary of units II/III) layers, respectively. These data suggest that the cores cover the period from the middle stage of marine isotope stage (MIS) 3 to the Holocene. In each core, a so-called dark laminated mud (DLM) layer in unit II commonly has high contents of Si and Al, suggesting that the DLM layer generally contains significant amounts of fine-grained silicates and/or aluminosilicates. In addition, these DLM layers are enriched in Fe relative to Mn, iron being predominantly bound in framboidal pyrite. The size distribution of pyrite in the DLM layers suggests that these have formed under anoxic (euxinic) conditions at times of reduced water circulation in the basin during sea-level lowstand (euxinic environment). The C/N ratios [5–12] suggest that sedimentary organic matter in the cores is predominantly of marine origin. Total organic carbon (TOC) contents increased shortly before Termination I. This could have been caused by an increased flux of marine organic matter in association with sea-level rise. The C and S values of units II and III (Late Pleistocene sediments; C: <2.0%; S: 0.5–2.1%) suggest a more euxinic environment than that of unit I (Holocene sediments; C: 1.0–3.5%; S: <1.0%). Concentrations of SO₄^2– in the interstitial water decrease with increasing burial depth, whereas CH₄ concentrations show the reverse trend. Therefore, it seems that sulfate reduction, probably related to microbial activity, predominates in the upper core sections (<5 m), shifting to methanogenesis in the lower core sections.     

Yeosu dinosaur track sites of Korea: The youngest dinosaur track records in Asia

Eighty two dinosaur trackways were newly discovered in Upper Cretaceous lacustrine deposits on islands in the vicinity of Yeosu, Korea. Most dinosaur tracks occur in marginal lake deposits with polygonal desiccation cracks. The dinosaur tracks at the Yeosu site include 65 ornithopod trackways, 16 theropod trackways and one sauropod trackway. The prevalence of ornithopod tracks and the limited occurrence of sauropod tracks at the Yeosu site evidently reflect decreased sauropod diversity in the Upper Cretaceous. All ornithopod trackways represent bipeds, and most of the ornithopod tracks are similar to Caririchnium from other sites of the Korean peninsula. All fossil wood specimens collected in the study area represent conifers (three species of cupressaceous and two species of taxodiaceous conifers, and a new species) except for one, which is a discotyledon. It is thus inferred that the southwestern part of the Korean Peninsula was primarily covered with mesic forests with taxodiaceous trees during the Late Cretaceous. The K–Ar age of the Yeosu tracksite is determined as 81–65 Ma (Camapnian to Maastrichtian). It indicates that the Yeosu track site contains the last records of dinosaurs living in Asia. Consequently, semi-arid palaeoclimatic conditions, together with a large lake as a persistent water source and rich vegetation of gymnosperm trees as food, resulted in the preservation of abundant dinosaur tracks in the Upper Cretaceous on the Korean Peninsula.     

Landslide susceptibility analysis using GIS and artificial neural network

The purpose of this study is to develop landslide susceptibility analysis techniques using an arti?cial neural network and to apply the newly developed techniques to the study area of Yongin in Korea. Landslide locations were identi?ed in the study area from interpretation of aerial photographs, ?eld survey data, and a spatial database of the topography, soil type and timber cover. The landslide‐related factors (slope, curvature, soil texture, soil drainage, soil effective thickness, timber age, and timber diameter) were extracted from the spatial database. Using those factors, landslide susceptibility was analysed by arti?cial neural network methods. The landslide susceptibility index was calculated by the back‐propagation method, which is a type of arti?cial neural network method, and the susceptibility map was made with a geographic information system (GIS) program. The results of the landslide susceptibility analysis were veri?ed using landslide location data. The validation results showed satisfactory agreement between the susceptibility map and the existing data on landslide location. A GIS was used to ef?ciently analyse the vast amount of data, and an arti?cial neural network to be an effective tool to maintain precision and accuracy. The results can be used to reduce hazards associated with landslides and to plan land use and construction. Copyright © 2003 John Wiley & Sons, Ltd.     

Determination and application of the weights for landslide susceptibility mapping using an artificial neural network

The purpose of this study is the development, application, and assessment of probability and artificial neural network methods for assessing landslide susceptibility in a chosen study area. As the basic analysis tool, a Geographic Information System (GIS) was used for spatial data management and manipulation. Landslide locations and landslide-related factors such as slope, curvature, soil texture, soil drainage, effective thickness, wood type, and wood diameter were used for analyzing landslide susceptibility. A probability method was used for calculating the rating of the relative importance of each factor class to landslide occurrence. For calculating the weight of the relative importance of each factor to landslide occurrence, an artificial neural network method was developed. Using these methods, the landslide susceptibility index (LSI) was calculated using the rating and weight, and a landslide susceptibility map was produced using the index. The results of the landslide susceptibility analysis, with and without weights, were confirmed from comparison with the landslide location data. The comparison result with weighting was better than the results without weighting. The calculated weight and rating can be used to landslide susceptibility mapping.     

Use of time series analysis for the identification of tidal effect on groundwater in the coastal area of Kimje, Korea

The purpose of this study is to apply time series analysis to investigate whether the groundwater quality in the coastal area is affected by the tide. Continuous and regular in situ monitoring data of electrical conductivity (EC) and groundwater level, and tidal level data measured by the National Oceanographic Research Institute were used for the time series analysis. Through the time series analysis, it is known that EC and groundwater level conspicuously fluctuate with two periodicities (15.4 and 0.52-day), which is very similar to those of the tide. Also the behaviors of their fluctuations vary in accordance with the tidal period. These indicate that the groundwater quality has been mainly controlled by the tidal level, and the strength of tidal effect on the groundwater quality is different according to the tidal period.