Structure de socle,sismostratigraphie et héritage structural au cours du rifting au niveau de la marge d'Ifni/Tan-Tan (Maroc sud-occidental)

Seismic reflection profiles from the Ifni/Tan-Tan Atlantic margin of southern Morocco, interpreted in the light of well data and field geology from the Western Anti-Atlas, allowed us to establish the seismostratigraphic framework of the syn-rift series and to reveal (i) a compressional structural style in the pre-Triassic basement similar to that established in the adjacent outcropping onshore basement but with an opposed western vergence, (ii) the importance of inherited anterior structures in the formation of Triassic-Liassic rift structures and (iii) an east–west propagation of these rift structures. To cite this article: N. AbouAli et al., C. R. Geoscience 337 (2005).     

Using inverse modeling and hierarchical cluster analysis for hydrochemical characterization of springs and Talkhab River in Tang-Bijar oilfield,Iran

Hierarchical cluster analysis (HCA) and inverse modeling (PH REdox EQuilibrium (in C language) (PHREEQC)) were simultaneously useful approaches in interpreting surface water hydrochemistry within Talkhab River in the Tang-Bijar oilfield, Iran, where large uncertainties exist in the understanding of the water quality system. Q-mode HCA applied to the data revealed three major surface water associations distinguished on the basis of the major causes of variation in the hydrochemistry. The three water groups were classified as upstream waters (group 1: Ca–SO₄), intermediate waters (group 2: Ca–SO₄–Cl), and downstream waters (group 3: Na–Cl). Geochemical reaction models were constructed using PHREEQC to establish the reactions associated with the different mineral phases through inverse modeling. The hydrochemical compositions of the water groups and the mass balance calculations indicate that the dominant processes and reactions responsible for the hydrochemical evolution in the system are (1) dissolution of evaporites, (2) precipitation of carbonate minerals, (3) silicate weathering reactions, (4) limited mixing with saline water, and (5) ion exchange.     

Estimation of air-overpressure produced by blasting operation through a neuro-genetic technique

Blasting operations usually produce significant environmental problems which may cause severe damage to the nearby areas. Air-overpressure (AOp) is one of the most important environmental impacts of blasting operations which needs to be predicted and subsequently controlled to minimize the potential risk of damage. In order to solve AOp problem in Hulu Langat granite quarry site, Malaysia, three non-linear methods namely empirical, artificial neural network (ANN) and a hybrid model of genetic algorithm (GA)–ANN were developed in this study. To do this, 76 blasting operations were investigated and relevant blasting parameters were measured in the site. The most influential parameters on AOp namely maximum charge per delay and the distance from the blast-face were considered as model inputs or predictors. Using the five randomly selected datasets and considering the modeling procedure of each method, 15 models were constructed for all predictive techniques. Several performance indices including coefficient of determination (R ²), root mean square error and variance account for were utilized to check the performance capacity of the predictive methods. Considering these performance indices and using simple ranking method, the best models for AOp prediction were selected. It was found that the GA–ANN technique can provide higher performance capacity in predicting AOp compared to other predictive methods. This is due to the fact that the GA–ANN model can optimize the weights and biases of the network connection for training by ANN. In this study, GA–ANN is introduced as superior model for solving AOp problem in Hulu Langat site.     

The Red Sea depositional architecture: insights from 3D modeling

More than half a century of geological and exploration studies have taken place in the Red Sea area, and still very limited information is available to the geological community in regard to the lithological distribution and the stratigraphic architecture. In this study, extensive well data was used to build the first lithologic and stratigraphic 3D models of the entire Red Sea to better understand the lithological distribution. The potential models have been constrained by bathymetric and geophysical data. Studied data demonstrate that up to 5 km of sediments were deposited in the Red Sea. It is mainly comprised of limestones, evaporites, and shales. Our models show that the evaporite body represents more than 70% of the Red Sea succession. In particular, the evaporite succession seems to be well developed in the southern region. Salt dome features are present and developed close to the margins. The models suggest that domal formation did not enable thick carbonate accumulation in some parts of the basin but the carbonate generally follows the evaporite trend. The models help to identify the main controls leading to salt diapir by highlighting the distribution of this body and the geometry of geological structures. Syn-rift faulting and rifting has been one of the most prominent structural features. Complex interplay of tectono-stratigraphic events played a significant role in shaping the stratigraphic evolution of the Red Sea basin with multiple evolution phases of paleoenvironment and paleogeographic were recognized based on the models. Our synthesis and interpretation support that moderately deep marine conditions dominated in the Miocene, whereas shallow seas dominated the whole basin during the Plio-Pleistocene period as a result of episodic marine invasion. However, lacustrine environment may have prevailed at the Oligocene time in isolated half grabens.     

Self-organised clustering for road extraction in classified imagery

The extraction of road networks from digital imagery is a fundamental image analysis operation. Common problems encountered in automated road extraction include high sensitivity to typical scene clutter in high-resolution imagery, and inefficiency to meaningfully exploit multispectral imagery (MSI). With a ground sample distance (GSD) of less than 2 m per pixel, roads can be broadly described as elongated regions. We propose an approach of elongated region-based analysis for 2D road extraction from high-resolution imagery, which is suitable for MSI, and is insensitive to conventional edge definition. A self-organising road map (SORM) algorithm is presented, inspired from a specialised variation of Kohonen's self-organising map (SOM) neural network algorithm. A spectrally classified high-resolution image is assumed to be the input for our analysis. Our approach proceeds by performing spatial cluster analysis as a mid-level processing technique. This allows us to improve tolerance to road clutter in high-resolution images, and to minimise the effect on road extraction of common classification errors. This approach is designed in consideration of the emerging trend towards high-resolution multispectral sensors. Preliminary results demonstrate robust road extraction ability due to the non-local approach, when presented with noisy input.     

Regression‐based approach to low flow prediction in the Maryland Piedmont region under joint climate and land use change

We examine the low flow records for six urbanized watersheds in the Maryland Piedmont region and develop regression equations to predict annual minimum low flow events. The effects of both future climate (based on precipitation and temperature projections from two climate models: Hadley and the Canadian Climate Centre (CCC)) and land use change are incorporated to illustrate possible future trends in low flows. A regression modelling approach is pursued to predict the minimum annual 7‐day low flow estimates for the proposed future scenarios. A regional regression model was calibrated with between 10 and 50 years of daily precipitation, daily average temperature, annual imperviousness, and the daily observed flow time‐series across six watersheds. Future simulations based on a 55 km² urbanizing watershed just north of Washington, DC, were performed. When land use and climate change were employed singly, the former predicted no trends in low flows and the latter predicted significant increasing trends under Hadley and no trends under CCC. When employed jointly, however, low flows were predicted to decrease significantly under CCC, whereas Hadley predicted no significant trends in low flows. Antecedent precipitation was the most influential predictor on low flows, followed by urbanization. Copyright © 2006 John Wiley & Sons, Ltd.     

On the iron interpretation of the 6.4 keV emission line from SGR 1900+14

A 6.4 keV emission line was discovered in an unusual burst from the soft gamma repeater SGR 1900+14 with the Rossi X-ray Timing Explorer (RXTE). The line was detected in part of a complex multipeak precursor that preceded the unusual burst of 1998 August 29, i.e. two days after the giant flare of August 27 from the source. The origin of the line was not firmly identified and two possible interpretations were equally plausible including (a) Kα fluorescence from a small iron rich material that was ejected to the magnetosphere during the August 27 flare, and (b) proton or α-particle cyclotron resonance. If the iron scenario was correct, we expect to find evidence for the line during the intervening interval between the flare and the August 29 burst, i.e. on August 28. Here we present the results of the August 28 burst observation, taken with RXTE. We detect a total of seven bursts whose individual and joint spectra do not show evidence for spectral lines. We also investigated a sample of nine bursts before and after the August 29 burst (from 1998 June to December) that do not reveal evidence for a spectral line near 6.4 keV or elsewhere. These results disfavor the iron scenario and make the proton/α-particle cyclotron resonance interpretation more plausible. The appearance of the emission line in part of a complex burst and its absence from the studied sample indicate that the line is likely due to a transient phenomenon that may depend on the burst morphology, energetics and the properties of the emission region.      

Ecohydrographic constraints on biodiversity and distribution of phytoplankton and zooplankton in coral reefs of the Red Sea,Saudi Arabia

An integral concept of ecological research is the constraint of biodiversity along latitudinal and environmental gradients. The Red Sea features a natural example of a latitudinal gradient of salinity, temperature and nutrient richness. Coral reefs along the Red Sea coasts are supported with allochthonous resources such as oceanic and neritic phytoplankton and zooplankton; however, relatively little is known about how the ecohydrography correlates with plankton biodiversity and abundance. In this article we present the biodiversity of phytoplankton and zooplankton in Red Sea coral reefs. Oceanographic data (temperature, salinity), water samples for nutrient analysis, particulate organic matter, phytoplankton and zooplankton, the latter with special reference to Copepoda (Crustacea), were collected at nine coral reefs over ~1500 km distance along the Red Sea coast of Saudi Arabia. The trophic state of ambient waters [as indicated by chlorophyll a (Chl a)] changed from strong oligotrophy in the north to mesotrophy in the south and was associated with increasing biomasses of Bacillariophyceae, picoeukaryotes and Synechococcus as indicated by pigment fingerprinting (CHEMTAX) and flow cytometry. Net‐phytoplankton microscopy revealed a Trichodesmium erythraeum (Cyanobacteria) bloom north of the Farasan Islands. Several potentially harmful algae, including Dinophysis miles and Gonyaulax spinifera (Dinophyceae), were encountered in larger numbers in the vicinity of the aquaculture facilities at Al Lith. Changes in zooplankton abundance were mainly correlated to the phytoplankton biomass following the latitudinal gradient. The largest zooplankton abundance was observed at the Farasan Archipelago, despite high abundances of copepodites, veligers (Gastropoda larvae) and Chaetognatha at Al Lith. Although the community composition changed over latitude, biodiversity indices of phytoplankton and zooplankton did not exhibit a systematic pattern. As this study constitutes the first current account of the plankton biodiversity in Red Sea coral reefs at a large spatial scale, the results will be informative for ecosystem‐based management along the coastline of Saudi Arabia.     

Conjunctive use of surface water and groundwater via the bank infiltration method

The bank infiltration (BI) technique may be a viable option if the local climate, hydrological, and geological conditions are conducive. This study was specifically conducted to explore the possibility of using BI to source the polluted surface water in conjunction with groundwater. Three major factors were considered for evaluation: (1) investigation on the contribution of surface water through BI, (2) input of local groundwater, and (3) water quality characteristics of water supply. Initially, the geophysical method was employed to define the subsurface geology and hydrogeology, and isotope techniques were performed to identify the source of groundwater recharge and interaction between surface water and groundwater. The physicochemical and microbiological parameters of the local surface water bodies and groundwater were analyzed before and during water abstraction. Extracted water revealed a 5 %–98 % decrease in turbidity, as well as HCO₃ ⁺, SO₄ ^?, NO₃ ^?, Al, As, and Ca concentration reduction compared with those of Langat river water. However, water samples from test wells during pumping show high concentrations of Fe²⁺ and Mn²⁺. In addition, amounts of Escherichia coli, total coliform, and Giardia were significantly reduced (99.9 %). Pumping test results indicate that the two wells (DW1 and DW2) were able to sustain yields.     

Performance studies of the fixed stress split algorithm for immiscible two-phase flow coupled with linear poromechanics

In this work, we measure the performance of the fixed stress split algorithm for the immiscible water-oil flow coupled with linear poromechanics. The two-phase flow equations are solved on general hexahedral elements using the multipoint flux mixed finite element method whereas the poromechanics equations are discretized using the conforming Galerkin method. We introduce a rigorous calculation of the update in poroelastic properties during the iterative solution of the coupled system equations. The effects of the coupling parameter on the performance of the fixed stress algorithm is demonstrated in two field studies: the Frio oil reservoir and the Cranfield injection site.